Iron-Mediated Homogeneous ICAR ATRP of Methyl Methacrylate under ppm Level Organometallic Catalyst Iron(III) Acetylacetonate

Roughness-Mediated SI-Fe0CRP for Polymer Brush Engineering toward Superior Drag Reduction

Surface-initiated iron(0)-mediated controlled radical polymerization (SI-Fe0CRP) with low toxicity and excellent biocompatibility is promising for the fabrication of biofunctional polymer coatings. However, the development of Fe(0)-based catalysts remains limited by the lower dissociation activity of the Fe(0) surface in comparison to Cu(0). Here, we found that, by simply polishing the Fe(0) plate surface with sandpaper, the poly(methacryloyloxy)ethyl trimethylammonium chloride brush growth rate has been increased significantly to 3.3 from 0.14 nm min-1 of the pristine Fe(0) plate. The excellent controllability of roughness-mediated SI-Fe0CRP can be demonstrated by customizing multicompartment brushes and triblock brushes. Furthermore, we found that the resulting polymer brush coatings exhibit remarkably low water adhesion (0.097 mN) and an outstanding drag reduction rate of 52% in water. This work provides a promising strategy for regulating the grafting rate of polymer brushes via SI-Fe0CRP for biocompatible marine drag reduction coatings.

Poly(methyl methacrylate) in Orthopedics: Strategies, Challenges, and Prospects in Bone Tissue Engineering

Poly(methyl methacrylate) (PMMA) is widely used in orthopedic applications, including bone cement in total joint replacement surgery, bone fillers, and bone substitutes due to its affordability, biocompatibility, and processability. However, the bone regeneration efficiency of PMMA is limited because of its lack of bioactivity, poor osseointegration, and non-degradability. The use of bone cement also has disadvantages such as methyl methacrylate (MMA) release and high exothermic temperature during the polymerization of PMMA, which can cause thermal necrosis. To address these problems, various strategies have been adopted, such as surface modification techniques and the incorporation of various bioactive agents and biopolymers into PMMA. In this review, the physicochemical properties and synthesis methods of PMMA are discussed, with a special focus on the utilization of various PMMA composites in bone tissue engineering. Additionally, the challenges involved in incorporating PMMA into regenerative medicine are discussed with suitable research findings with the intention of providing insightful advice to support its successful clinical applications.

Iron-Based Catalytically Active Complexes in Preparation of Functional Materials

Iron complexes are particularly interesting as catalyst systems over the other transition metals (including noble metals) due to iron’s high natural abundance and mediation in important biological processes, therefore making them non-toxic, cost-effective, and biocompatible. Both homogeneous and heterogeneous catalysis mediated by iron as a transition metal have found applications in many industries, including oxidation, C-C bond formation, hydrocarboxylation and dehydration, hydrogenation and reduction reactions of low molecular weight molecules. These processes provided substrates for industrial-scale use, e.g., switchable materials, sustainable and scalable energy storage technologies, drugs for the treatment of cancer, and high molecular weight polymer materials with a predetermined structure through controlled radical polymerization techniques. This review provides a detailed statement of the utilization of homogeneous and heterogeneous iron-based catalysts for the synthesis of both low and high molecular weight molecules with versatile use, focusing on receiving functional materials with high potential for industrial application.

Effects of various Cu(0), Fe(0), and proanthocyanidin reducing agents on Fe(iii)-catalysed ATRP for the synthesis of PMMA block copolymers and their self-assembly behaviours

Well-defined PMMA, PMMA-b-PBzMA and PMMA-b-PBMA polymers were obtained via green Fe-ATRP with the aid of proanthocyanidins. Interestingly, microphase separation was observed in PMMA-b-PBMA polymer with upper critical ordering temperature behaviour.

Ligand- and solvent-free ATRP of MMA with FeBr3 and inorganic salts

A new cost-effective and safe protocol for the bulk ATRP of MMA uses FeBr₃, EBrPA and an inorganic compound (carbonate, bicarbonate, phosphate, hydroxide, chloride, bromide) of an alkali metal cation.

The fate of copper catalysts in atom transfer radical chemistry

The pathway of atom transfer radical polymerisation (ATRP) is influenced by the nature of the alkyl bromide initiator (RBr) to the extent that reactions between the radical R˙ and the original copper(i) catalyst can divert the reaction toward different products.

Addressing the role of triphenylphosphine in copper catalyzed ATRP

A new Atom Transfer Radical Polymerization (ATRP) process with triphenylphosphine (PPh₃) and [Cu^IIMe₆TREN]²⁺ as the catalyst system is reported.

Externally controlled atom transfer radical polymerization

ATRP can be externally controlled by electrical current, light, mechanical forces and various chemical reducing agents. The mechanistic aspects and preparation of polymers with complex functional architectures and their applications are critically reviewed.

Photocatalyzed iron-based ATRP of methyl methacrylate using 1,3-dimethyl-2-imidazolidinone as both solvent and ligand

A simple photocatalyzed Fe-based ATRP of MMA was conducted under UV irradiation using the “green” solvent DMI as both the solvent and ligand.

A novel copper catalyst containing a hydroxyl functional group: a facile strategy to prepare block copolymers of vinyl monomer and ε-caprolactone via tandem reverse ATRP and ROP

A facile hydroxyl-functionalized catalyst was first accessed to prepare block copolymers of vinyl and cyclic ester monomers via tandem reverse ATRP/ROP.

Reversible Addition-Fragmentation Chain Transfer Polymerization of Acrylonitrile under Irradiation of Blue LED Light

Compared to unhealthy UV or γ-ray and high-energy-consumption thermal external stimuli, the promising light emitting diode (LED) external stimulus has some outstanding technological merits such as narrow wavelength distribution, low heat generation and energy consumption, and safety for human beings. In this work, a novel reversible addition-fragmentation transfer (RAFT) polymerization system for acrylonitrile (AN) was developed under the irradiation of blue LED light at room temperature, using 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene (4CzIPN) as a novel radical initiator and 2-cyanoprop-2-yl-1-dithionaphthalate (CPDN) as the typical chain transfer agent. Well-defined polyacrylonitrile (PAN) with a controlled molecular weight and narrow molecular weight distribution was successfully synthesized. This strategy may provide another effective method for scientific researchers or the industrial community to synthesize a PAN-based precursor of carbon fibers.