Synthesis and Phase Transition of Poly(N-isopropylacrylamide)-Based Thermo-Sensitive Cyclic Brush Polymer

Cyclodextrin-Based Polymeric Drug Delivery Systems for Cancer Therapy

Cyclodextrins (CDs) are one of the most extensively studied cyclic-oligosaccharides due to their low toxicity, good biodegradability and biocompatibility, facile chemical modification, and unique inclusion capacity. However, problems such as poor pharmacokinetics, plasma membrane disruption, hemolytic effects and a lack of target specificity still exist for their applications as drug carriers. Recently, polymers have been introduced into CDs to combine the advantages of both biomaterials for the superior delivery of anticancer agents in cancer treatment. In this review, we summarize four types of CD-based polymeric carriers for the delivery of chemotherapeutics or gene agents for cancer therapy. These CD-based polymers were classified based on their structural properties. Most of the CD-based polymers were amphiphilic with the introduction of hydrophobic/hydrophilic segments and were able to form nanoassemblies. Anticancer drugs could be included in the cavity of CDs, encapsulated in the nanoparticles or conjugated on the CD-based polymers. In addition, the unique structures of CDs enable the functionalization of targeting agents and stimuli-responsive materials to realize the targeting and precise release of anticancer agents. In summary, CD-based polymers are attractive carriers for anticancer agents.

Molecular bottlebrush with pH-responsive cleavable bonds as a unimolecular vehicle for anticancer drug delivery

Drug delivery systems with targeted and smart properties have emerged as an efficient strategy to overcome the challenges of cancer chemotherapy such as toxic side effects and the development of multidrug resistance. In this study, a biocompatible bottlebrush polymer poly((3-(2-bromo-2-methylpropionate)propyldimethylsilyloxy)ethyl methacrylate)-graft-poly(2-methacryloyloxyethyl phosphorylcholine) P(BIBS-EMA)-g-PMPC with pH-responsive silanol cleavable bond was designed and developed for delivery of doxorubicin. A549 cell line of human lung carcinoma was tested. The synthesized bottlebrush polymer was analyzed and characterized via Fourier transform infrared spectroscopy, FTIR, nuclear magnetic resonance spectroscopy, ¹H NMR, gel permeation chromatography, GPC, dynamic laser light scattering, DLS, and static laser light scattering, SLS, techniques. The cleavage process was also precisely studied to confirm the pH-responsiveness of such bottlebrush polymers. In vitro loading and release studies of doxorubicin as a model drug were examined and the results showed a pH-dependent release manner with a twice higher release rate under cancerous tissue conditions compared to standard physiological conditions. MTT cytotoxicity assay was also performed to prove the biocompatibility of the designed polymeric platform on healthy human cells. Due to the presence of bio-inspired poly(2-methacryloyloxyethyl phosphorylcholine) side chains in the prepared bottlebrush polymer, the formed polymer-drug complex could also exhibit effective internalization into tumor cells. These facts further support the potential use of this carrier in drug delivery applications and for further in vivo studies.

Phototunable Cloud Point Temperatures Stemming from Cyclic Topology: Synthesis and Thermal Phase Transition Behavior of Cyclic Poly(N-acryloylsarcosine methyl ester)

Cyclic polymers possess distinct properties compared with their linear counterparts, such as smaller hydrodynamic volume, lower viscosity, and higher glass-transition temperature, etc. To explore the impact of the cyclic topology on the thermo-induced phase transition behavior of poly(N-acryloylsarcosine methyl ester) (PNASME), the anthracene-terminated telechelic PNASMEs are synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization of monomer NASME using a bifunctional chain transfer agent (CTA) with two anthryl groups. Subsequently, cyclic PNASMEs are prepared via UV-induced cyclization under 365 nm UV. There are considerable increases (up to 50 °C) for the cloud point temperatures (T_cp s) of cyclic PNASMEs compared with the linear counterparts. In view of the increment, the T_cp of PNASME is tuned by varying the cyclic/linear ratio (the molar ratio between cyclic PNASME and linear PNASME in the product) with different irradiation time.

Noncovalent and Dynamic Covalent Chemistry Strategies for Driving Thermoresponsive Phase Transition with Multistimuli and Controlled Encapsulation/Release

We report the development of multiresponsive thermally sensitive polymers through both supramolecular and reversible covalent strategies as well as their use in controlled encapsulation and release. Novel acylhydrazone-based dynamic covalent polymers displaying lower critical solution temperature (LCST) or upper critical solution temperature (UCST) were synthesized. A remarkable control over thermal phase transition can be tuned through multimodes, such as anions, cations, solvent, pH, and competing components. In particular, anion recognition allowed disassembly and thus led to a significant decrease of UCST in dimethyl sulfoxide, and the combination of anion and solvent effects offered additional handle for control. Moreover, the use of anions, cations, as well as pH change was employed for the modulation of LCST-type polymer in water. Furthermore, switching on/off thermoresponsiveness was readily achieved by dynamic covalent exchange. Mechanistic studies also shed light on stimuli-induced changes in aggregation behaviors. Finally, thermally controlled encapsulation and release of hydrophobic and hydrophilic dyes were realized with great repeatability and reversibility, respectively, showing potential in delivery and sensing. The results and strategies described should provide opportunities for many aspects, including dynamic assemblies, complex systems, and adaptive materials.

Amphiphilic multicomponent molecular brushes

Multicomponent molecular brushes containing amphiphilic polymer moieties are promising objects of research of macromolecular chemistry. The development of stimulus-responsive systems sensitive to changes in environmental parameters, based on the molecular brushes, opens up new possibilities for their applications in medicine, biochemistry and microelectronics. The review presents the current understanding of the structures of main types of amphiphilic multicomponent brushes, depending on the chemical nature and type of coupling of the backbone and side chains. The approaches to the controlled synthesis of multicomponent molecular brushes of different architecture are analyzed. Self-assembly processes of multicomponent molecular brushes in selective solvents are considered.

The bibliography includes 259 references.

Synthesis of a Smart Conductive Block Copolymer Responsive to Heat and Near Infrared Light

A method for the synthesis of a linear block copolymer (PNIPAM-b-PANI), containing a thermoresponsive block (poly(N-isopropylacrylamide), PNIPAM) and a Near Infrared (NIR) light-absorbing block (polyaniline, PANI), is reported. The synthetic approach involves a two-step successive polymerization reaction. First, the radical polymerization of NIPAM is done using 4-aminothiophenol as a chain transfer agent for the obtention of thermosensitive block terminated with an aniline (ANI) moiety. Second, the oxidative polymerization of ANI is initiated in ANI moiety of thermosensitive block to grow the second conductive PANI block. ¹H nuclear magnetic resonance (NMR) and FT-IR spectroscopy shows the characteristics peaks of both polymeric blocks revealing the successful copolymerization process. Static Light Scattering (SLS) and UV-Visible combined measurements allowed the determination of the M_w for PNIPAM-b-PANI macromolecule: 5.5 × 10⁵ g mol⁻¹. The resulting copolymer is soluble in water (8.3 g L⁻¹) and in non-aqueous solvents, such as ethanol, formic acid, acetonitrile, and others. Both polymer blocks chains show the properties of the polymer chains. The block copolymer shows a lower critical solution temperature (LCST) at the same temperature (32–34 °C) than PNIPAM, while the copolymer shows pH dependent UV-vis-NIR absorption similar to PANI. The PNIPAM block suffers a coil to globule transition upon NIR light irradiation (785 nm, 100 mW), as shown by turbidimetry and Atomic Force Microscopy (AFM), due to local heating (more than 9 °C in 12 min) induced by the NIR absorption at the PANI block. Furthermore, the electrical conductivity of PNIPAM-b-PANI thin films is demonstrated (resistivity of 5.3 × 10⁻⁴ Ω⁻¹ cm⁻¹), indicating that the PANI block is present in its conductive form.

Biosynthesis and characterization of antibacterial thermosensitive hydrogels based on corn silk extract, hyaluronic acid and nanosilver for potential wound healing

The wounds closure after physical injury or surgery is of significant clinical and research importance. In this study, thermosensitive and injectable hydrogels based on hyaluronic acid (HA), corn silk extract (CSE) and nanosilver were prepared and their potential use as a wound care material was investigated. Silver nanoparticles (Ag NPs) were biosynthesized by a microwave-assisted green technique using corn silk extract in an organic solvent-free medium. Rheological analysis demonstrated that the nanocomposites have good mechanical properties with gelation temperature close to the body temperature; hence, they can be easily administrated locally on wounded skins. The samples exhibited antibacterial activity toward gram-positive and gram-negative bacteria. Cytotoxicity assay showed that the hydrogels have good biocompatibility. Interestingly, an in-vitro model of wound healing revealed that the nanocomposites allow faster wound closure and repair, compared to the control. The obtained results highlight the potential application of these novel injectable hydrogels as wound dressing.

Temperature Responsive Nanoparticles Based on PEGylated Polyaspartamide Derivatives for Drug Delivery

The temperature responsive PEGylated polyaspartamide derivative, denoted as mPEG-PAAHP, was synthesized by the click reaction. FTIR and ¹H NMR were adopted to characterize and confirm the chemical structures of the obtained mPEG-PAAHPs. The temperature responsive behavior investigated by transmittance and dynamic light scattering showed that some of the obtained mPEG-PAAHPs exhibited obvious temperature responsiveness and could be used to prepare nanoparticles by quickly heating. Drug paclitaxel can be encapsulated into mPEG-PAAHP based nanoparticles with a high encapsulation efficiency up to 99% (corresponding to a drug loading content of around 9.9%). Dynamic light scattering results showed that the PTX-loaded nanoparticles had a mean size around 80 nm (PDI<0.2) and good stability in PBS with 150 mM ionic strength. In vitro cytotoxicity results showed that mPEG-PAAHP did not show any toxicity to HeLa cells, but the PTX-loaded nanoparticles based on mPEG-PAAHP exhibited obvious anti-cancer activity. Thus, the temperature responsive PEGylated polyaspartamide derivative mPEG-PAAHP may be a promising drug delivery system.

Design and Synthesis of a Cyclic Double-Grafted Polymer Using Active Ester Chemistry and Click Chemistry via A "Grafting onto" Method

Combing active ester chemistry and click chemistry, a cyclic double-grafted polymer was successfully demonstrated via a "grafting onto" method. Using active ester chemistry as post-functionalized modification approach, cyclic backbone (c-P2) was synthesized by reacting propargyl amine with cyclic precursor (poly(pentafluorophenyl 4-vinylbenzoate), c-PPF4VB6.5k). Hydroxyl-containing polymer double-chain (l-PS-PhOH) was prepared by reacting azide-functionalized polystyrene (l-PSN₃) with 3,5-bis(propynyloxy)phenyl methanol, and further modified by azide group to generate azide-containing polymer double-chain (l-PS-PhN₃). The cyclic backbone (c-P2) was then coupled with azide-containing polymer double-chain (l-PS-PhN₃) via CuAAC reaction to construct a novel cyclic double-grafted polymer (c-P2-g-Ph-PS). This research realized diversity and complexity of side chains on cyclic-grafted polymers, and this cyclic double-grafted polymer (c-P2-g-Ph-PS) still exhibited narrow molecular weight distribution (Mw/Mn < 1.10).

Multi-Responsive Behaviors of Copolymers Bearing N-Isopropylacrylamide with or without Phenylboronic Acid in Aqueous Solution

Continuing efforts to develop novel smart materials are anticipated to upgrade the quality of life of humans. Thermo-responsive poly(N-isopropylacrylamide) and glucose-responsive phenylboronic acid-typical representatives-are often integrated as multi-stimuli-sensitive materials, but few are available for side-by-side comparisons with their properties. In this study, both copolymers bearing N-isopropylacrylamide (NIPAAm), with or without 3-acrylamidophenylboronic acid (AAPBA), were synthesized by free radical polymerization, and characterized by Fourier transform infrared spectrometry, nuclear magnetic resonance hydrogen spectroscopy and gel permeation chromatography. Dynamic light scattering was used to analyze and compare the responsive behaviors of the copolymers in different aqueous solutions. Atomic force microscopy was also employed to investigate the apparent morphology changes with particle sizes. The results demonstrated that the introduction of NIPAAm endowed the composite materials with thermosensitivity, whereas the addition of AAPBA lowered the molecular weight of the copolymers, intensified the intermolecular aggregation of the nanoparticles, reduced the lower critical solution temperature (LCST) of the composites, and accordingly allowed the copolymers to respond to glucose. It was also concluded that the responding of smart copolymers to operating parameters can be activated only under special conditions, and copolymer dimension and conformation were affected by inter/intramolecular interactions.

Fabrication of Thermosensitive Cyclic Brush Copolymer with Enhanced Therapeutic Efficacy for Anticancer Drug Delivery

Adaptation of cyclic brush polymer for drug delivery applications remains largely unexplored. Herein, cyclic brush copolymer of poly(2-hydroxyethyl methacrylate-g-poly(N-isopropylacrylamide-st-N-hydroxyethylacrylamide)) (cb-P(HEMA-g-P(NIPAAm-st-HEAAm))), comprising a cyclic core of PHEMA and thermosensitive brushes of statistical copolymer of P(NIPAAm-st-HEAAm), is designed and synthesized successfully via a graft-from approach using atom transfer free radical polymerization from a cyclic multimacroinitiator. The composition of the brush is optimized to endow the resulting cyclic brush copolymer with a lower critical solution temperature (LCST) slightly above the physiological temperature, but lower than the localized temperature of tumor tissue, which is suitable for the hyperthermia-triggered anticancer drug delivery. Critical aggregation concentration determination reveals better stability for the unimolecular nanoparticle formed by the cyclic brush copolymer than that formed by the bottlebrush analogue. The dramatically increased size with elevated temperatures from below to above the LCST confirms hyperthermia-induced aggregation for both formulations. Such structural destabilization promotes significantly the drug release at 40 °C. Most importantly, the drug-loaded cyclic brush copolymer shows enhanced in vitro cytotoxicity against HeLa cells than the bottlebrush counterpart. The better stability and higher therapeutic efficacy demonstrates that the thermosensitive cyclic brush copolymer is a better formulation than bottle brush copolymer for controlled drug release applications.

Promotion of micelle stability via a cyclic hydrophilic moiety

A cyclic hydrophilic moiety promotes stability of polymeric micelles significantly.