Surface Hydrophobic Modification of Biochar by Silane Coupling Agent KH-570

Biomolecule-grafted GO enhanced the mechanical and biological properties of 3D printed PLA scaffolds with TPMS porous structure

Graphene oxide (GO) exhibits excellent mechanical strength and modulus. However, its effectiveness in mechanically reinforcing polymer materials is limited due to issues with interfacial bonding and dispersion arising from differences in the physicochemical properties between GO and polymers. Surface modification using coupling agents is an effective method to improve the bonding problem between polymer and GO, but there may be biocompatibility issues when used in the biomedical field. In this study, the biomolecule L-lysine, was applied to improve the interfacial bonding and dispersion of GO in polylactic acid (PLA) without compromising biocompatibility. The PLA/L-lysine-modified GO (PLA/L-GO) bone scaffold with triply periodic minimal surface (TPMS) structure was prepared using fused deposition modeling (FDM). The FTIR results revealed successful grafting of L-lysine onto GO through the reaction between their -COOH and -NH2 groups. The macroscopic and microscopic morphology characterization indicated that the PLA/L-GO scaffolds exhibited an characteristics of dynamic diameter changes, with good interlayer bonding. It was noteworthy that the L-lysine modification promoted the dispersion of GO and the interfacial bonding with the PLA matrix, as characterized by SEM. As a result, the PLA/0.1L-GO scaffold exhibited higher compressive strength (13.2 MPa) and elastic modulus (226.8 MPa) than PLA/0.1GO. Moreover, PLA/L-GO composite scaffold exhibited superior biomineralization capacity and cell response compared to PLA/GO. In summary, L-lysine not only improved the dispersion and interfacial bonding of GO with PLA, enhancing the mechanical properties, but also improved the biological properties. This study suggests that biomolecules like L-lysine may replace traditional modifiers as an innovative bio-modifier to improve the performance of polymer/inorganic composite biomaterials.

To Enhance the Performance of LiNi0.5Co0.2Mn0.3O2 Aqueous Electrodes by the Coating Process

The Li+/H+ cation exchange reactions occur when the cathode is exposed to water and can cause the degradation of battery performance, posing a significant challenge in the preparation of cathode aqueous electrodes. In this study, kh570 [3-(trimethoxysilyl)propyl methacrylate] is used to coat and modify the surface of LiNi0.5Co0.2Mn0.3O2 cathode particles. During the coating process, kh570 undergoes hydrolysis to generate silanol groups, which are subsequently bonded onto the surface of cathode particles and undergo self-polymerization through condensation reactions. As a result, a coating layer forms on the surface of the cathode. This change alters the surface properties of the cathode particles from hydrophilic to hydrophobic, thereby increasing their resistance to water. The coating layers reduce direct contact with water and minimizes internal particle microcracks formation in aqueous electrode processing. After the preparation of aqueous electrodes, the modified cathode exhibits lower transfer resistance and lower polarization, improving both the current rate performance and the cycling performance of the battery.

Effects of Hydrophobic Biochar-Modified Landfill Soil Cover on Methane Oxidation

Landfill cover soils play an important role in mitigating landfill methane (CH4) emissions. Incorporating biochar into the soil has proven effective in reducing CH4 emissions. However, the role of hydrophobic biochar in this context remains underexplored. This study investigated the CH4 removal efficiency of a biochar-modified landfill soil cover column (RB) and hydrophobic biochar-modified landfill soil cover column (RH) under varying CH4 influx gas concentrations (25 and 35%), simulated CH4 inflow rates (10, 15, and 20 ml/min), and temperatures (20, 25, 30, 35, and 40 °C). RH consistently outperformed RB in terms of CH4 removal efficiency under these experimental conditions. The optimal conditions for CH4 degradation by both RB and RH were observed at a CH4 influx gas concentration of 35%, a simulated CH4 inflow rate of 10 ml/min, and a temperature of ~30 °C. RH achieved a CH4 removal rate of up to 99.96%. In summary, the addition of hydrophobic biochar enhanced the air permeability and hydrophobicity of landfill cover soils, providing a promising alternative to conventional cover soils for reducing CH4 emissions from landfills.

Innovative Materials and Processes for Removal of Biopersistent Pollutants

The aim of this Special Issue “Innovative Materials and Processes for Removal of Biopersistent Pollutants” (https://www [...]

Nickel oxide nanoparticles synthesis using plant extract and evaluation of their antibacterial effects on Streptococcus mutans

Dental decay is known in the world as the most common human infectious disease. Ascending process of dental caries index in the world shows the failure of oral disease prevention. Streptococcus mutans bacteria cause acid damage and tooth decay by producing acid over time. Nanomaterials with suitable functionality, high permeability, extremely large surface area, significant reactivity, unique mechanical features, and non-bacterial resistance can be considered as promising agents for antimicrobial and antiviral applications. In this study, nickel oxide (NiO) nanoparticles with size range from 2 to 16 nm containing Stevia natural sweetener were eco-friendly synthesized via a simple method. Additionally, their various concentrations were evaluated on S. mutans bacteria by applying the broth dilution method. The results demonstrated that these spherical NiO nanoparticles had efficient bacteriostatic activity on this gram-positive coccus.

Thermal treatment alternatives for enzymes inactivation in fruit juices: Recent breakthroughs and advancements

Fruit juices (FJs) are frequently taken owing to their nutritious benefits, appealing flavour, and vibrant colour. The colours of the FJs are critical indicators of the qualitative features that influence the consumer's attention. Although FJs' intrinsic acidity serves as a barrier to bacterial growth, their enzymatic stability remains an issue for their shelf life. Inactivation of enzymes is critical during FJ processing, and selective inactivation is the primary focus of enzyme inactivation. The merchants, on the other hand, want the FJs to stay stable. The most prevalent technique of processing FJ is by conventional heat treatment, which degrades its nutritive value and appearance. The FJ processing industry has undergone a dramatic transformation from thermal treatments to nonthermal treatments (NTTs) during the past two decades to meet the requirements for microbiological and enzymatic stability. The manufacturers want safe and stable FJs, while buyers want high-quality FJs. According to the past investigation, NTTs have the potential to manufacture microbiologically safe and enzymatically stable FJs with low loss of bioactive components. Furthermore, it has been demonstrated that different NTTs combined with or without other NTTs or mild heating as a hurdle technology increase the synergistic effect for microbiological safety and stability of FJs. Concise information about the variables that affect NTTs' action mode has also been addressed. Primary inactivates enzymes by modifying the protein structure and active site conformation. NTTs may increase enzyme activity depending on the nature of the enzyme contained in FJs, the applied pressure, pH, temperature, and treatment period. This is due to the release of membrane-bound enzymes as well as changes in protein structure and active sites that allow substrate interaction. Additionally, the combination of several NTTs as a hurdle technology, as well as temperature and treatment periods, resulted in increased enzyme inactivation in FJs. Therefore, a combination of thermal and non-thermal technologies is suggested to increase the effectiveness of the process as well as preserve the juice quality.