Artificial Neural Network for Fast and Versatile Model Parameter Adjustment Utilizing PAT Signals of Chromatography Processes for Process Control under Production Conditions

A parameter estimation method for chromatographic separation process based on physics-informed neural network

Chromatographic separation processes are most often modeled in the form of partial differential equations (PDEs) to describe the complex adsorption equilibria and kinetics. However, identifying parameters in such a model requires substantial computational effort. In this work, a novel parameter estimation approach using a Physics-informed Neural Network (PINN) model is developed and tested for a binary component system. Numerical accuracy of our PINN model is confirmed by validating its simulations against those of the finite element method (FEM). Furthermore, model parameters in the kinetic model are estimated by the PINN model with sufficient accuracy from the observed data at the column outlet, where parameter fitting error can be reduced by up to 35.0 % from the conventional method. In a comparison with the conventional numerical method, our approach can reduce the computational time by up to 95 %. The robustness of the PINN model has also been demonstrated by estimating model parameters from noisy artificial experimental data.

Current challenges and recent advances on the path towards continuous biomanufacturing

Continuous biopharmaceutical manufacturing is currently a field of intense research due to its potential to make the entire production process more optimal for the modern, ever-evolving biopharmaceutical market. Compared to traditional batch manufacturing, continuous bioprocessing is more efficient, adjustable, and sustainable and has reduced capital costs. However, despite its clear advantages, continuous bioprocessing is yet to be widely adopted in commercial manufacturing. This article provides an overview of the technological roadblocks for extensive adoptions and points out the recent advances that could help overcome them. In total, three key areas for improvement are identified: Quality by Design (QbD) implementation, integration of upstream and downstream technologies, and data and knowledge management. First, the challenges to QbD implementation are explored. Specifically, process control, process analytical technology (PAT), critical process parameter (CPP) identification, and mathematical models for bioprocess control and design are recognized as crucial for successful QbD realizations. Next, the difficulties of end-to-end process integration are examined, with a particular emphasis on downstream processing. Finally, the problem of data and knowledge management and its potential solutions are outlined where ontologies and data standards are pointed out as key drivers of progress.

Scalable mRNA Machine for Regulatory Approval of Variable Scale between 1000 Clinical Doses to 10 Million Manufacturing Scale Doses

The production of messenger ribonucleic acid (mRNA) and other biologics is performed primarily in batch mode. This results in larger equipment, cleaning/sterilization volumes, and dead times compared to any continuous approach. Consequently, production throughput is lower and capital costs are relatively high. Switching to continuous production thus reduces the production footprint and also lowers the cost of goods (COG). During process development, from the provision of clinical trial samples to the production plant, different plant sizes are usually required, operating at different operating parameters. To speed up this step, it would be optimal if only one plant with the same equipment and piping could be used for all sizes. In this study, an efficient solution to this old challenge in biologics manufacturing is demonstrated, namely the qualification and validation of a plant setup for clinical trial doses of about 1000 doses and a production scale-up of about 10 million doses. Using the current example of the Comirnaty BNT162b2 mRNA vaccine, the cost-intensive in vitro transcription was first optimized in batch so that a yield of 12 g/L mRNA was achieved, and then successfully transferred to continuous production in the segmented plug flow reactor with subsequent purification using ultra- and diafiltration, which enables the recycling of costly reactants. To realize automated process control as well as real-time product release, the use of appropriate process analytical technology is essential. This will also be used to efficiently capture the product slug so that no product loss occurs and contamination from the fill-up phase is <1%. Further work will focus on real-time release testing during a continuous operating campaign under autonomous operational control. Such efforts will enable direct industrialization in collaboration with appropriate industry partners, their regulatory affairs, and quality assurance. A production scale-operation could be directly supported and managed by data-driven decisions.

Toward Autonomous Production of mRNA-Therapeutics in the Light of Advanced Process Control and Traditional Control Strategies for Chromatography

mRNA-based therapeutics are predicted to have a bright future. Recently, a B2C study was published highlighting the critical bottlenecks of mRNA manufacturing. The study focused on supply bottlenecks of various chemicals as well as shortages of skilled personnel. The assessment of existing messenger ribonucleic acid (mRNA) vaccine processing shows the need for continuous manufacturing processes that are capable of about 80% chemical reduction and more than 70% personnel at factor five more efficient equipment utilization. The key technology to solve these problems is both a higher degree of automation and the maximization of process throughput. In this paper, the application of a quality-by-design process development approach is demonstrated, using process models as digital twins. Their systematic application leads to both robust optimized process parameters, with an increase in productivity of up to 108%, and sophisticated control concepts, preventing batch failures and minimizing the operating workload in terms of personnel and chemicals’ consumption. The approach thereby provides a data-driven decision basis for the industrialization of such processes, which fulfills the regulatory requirements of the approval authorities and paves the way for PAT integration. In the process investigated, it was shown that conventional PID-based controls can regulate fluctuations in the input streams sufficiently well. Model-based control based on digital twins may have potential above all in a further increase in productivity, but is not mandatory to implement for the industrialization of continuous mRNA manufacturing.

Process Automation and Control Strategy by Quality-by-Design in Total Continuous mRNA Manufacturing Platforms

Vaccine supply has a bottleneck in manufacturing capacity due to operation personnel and chemicals needed. Assessment of existing mRNA (messenger ribonucleic acid) vaccine processing show needs for continuous manufacturing processes. This is enabled by strict application of the regulatory demanded quality by design process based on digital twins, process analytical technology, and control automation strategies in order to improve process transfer for manufacturing capacity, reduction out-of-specification batch failures, qualified personnel training and number, optimal utilization of buffers and chemicals as well as speed-up of product release. In this work, process control concepts, which are necessary for achieving autonomous, continuous manufacturing, for mRNA manufacturing are explained and proven to be ready for industrialization. The application of the process control strategies developed in this work enable the previously pointed out benefits. By switching from batch-wise to continuous mRNA production as was shown in previous work, which was the base for this study, a potential cost reduction by a factor 5 (i.e., from EUR 0.380 per dose to EUR 0.085 per dose) is achievable. Mainly, based on reduction of personnel (factor 30) and consumable (factor 7.5) per campaign due to the significant share of raw materials in the manufacturing costs (74–97). Future research focus following this work may be on model-based predictive control to gain further optimization potential of potential batch failure and out of specification (OOS) number reduction.

Need for a Next Generation of Chromatography Models—Academic Demands for Thermodynamic Consistency and Industrial Requirements in Everyday Project Work

Process chromatography modelling for process development, design, and optimization as well as process control has been under development for decades. Still, the discussion of scientific potential and industrial applications needs is open to innovation. The discussion of next-generation modelling approaches starting from Langmuirian to steric mass action and multilayer or thermodynamic consistent real and ideal adsorption theory or colloidal particle adsorption approaches is continued.