An Experimental and Modeling Combined Approach in Preparative Hydrophobic Interaction Chromatography

Enhancing thermodynamic consistency: Clarification on the application of asymmetric activity model in multi-component chromatographic separation

The single-component Mollerup model, with over 40 direct applications and 442 citations, is the most widely used activity model for chromatographic mechanistic modeling. Many researchers have extended this formula to multi-component systems by directly adding subscripts, a modification deemed thermodynamically inconsistent (referred to as the reference model). In this work, we rederived the asymmetric activity model for multi-component systems, using the van der Waals equation of state, and termed it the multi-component Mollerup model. In contrast to the reference model, our proposed model accounts for the contributions of all components to the activity. Three numerical experiments were performed to investigate the impact of the three different activity models on the chromatographic modeling. The results indicate that our proposed model represents a thermodynamically consistent generalization of the single-component Mollerup model to multi-component systems. This communication advocates adopting of the multi-component Mollerup model for activity modeling in multi-component chromatographic separation to enhance thermodynamic consistency.

Modeling multi-component separation in hydrophobic interaction chromatography with improved parameter-by-parameter estimation method

Mechanistic models are powerful tools for chromatographic process development and optimization. However, hydrophobic interaction chromatography (HIC) mechanistic models lack an effective and logical parameter estimation method, especially for multi-component system. In this study, a parameter-by-parameter method for multi-component system (called as mPbP-HIC) was derived based on the retention mechanism to estimate the six parameters of the Mollerup isotherm for HIC. The linear parameters (ks,i and keq,i) and nonlinear parameters (ni and qmax,i) of the isotherm can be estimated by the linear regression (LR) and the linear approximation (LA) steps, respectively. The remaining two parameters (kp,i and kkin,i) are obtained by the inverse method (IM). The proposed method was verified with a two-component model system. The results showed that the model could accurately predict the protein elution at a loading of 10 g/L. However, the elution curve fitting was unsatisfactory for high loadings (12 g/L and 14 g/L), which is mainly attributed to the demanding experimental conditions of the LA step and the potential large estimation error of the parameter qmax. Therefore, the inverse method was introduced to further calibrate the parameter qmax, thereby reducing the estimation error and improving the curve fitting. Moreover, the simplified linear approximation (SLA) was proposed by reasonable assumption, which provides the initial guess of qmax without solving any complex matrix and avoids the problem of matrix unsolvable. In the improved mPbP-HIC method, qmax would be initialized by the SLA and finally determined by the inverse method, and this strategy was named as SLA+IM. The experimental validation showed that the improved mPbP-HIC method has a better curve fitting, and the use of SLA+IM reduces the error accumulation effect. In process optimization, the parameters estimated by the improved mPbP-HIC method provided the model with excellent predictive ability and reasonable extrapolation. In conclusion, the SLA+IM strategy makes the improved mPbP-HIC method more rational and can be easily applied to the practical separation of protein mixture, which would accelerate the process development for HIC in downstream of biopharmaceuticals.

Parameter-by-parameter estimation method for adsorption isotherm in hydrophobic interaction chromatography

Hydrophobic interaction chromatography (HIC) is used as a critical polishing step in the downstream processing of biopharmaceuticals. Normally the process development of HIC is a cumbersome and time-consuming task, and the mechanical models can provide a powerful tool to characterize the process, assist process design and accelerate process development. However, the current estimation of model parameters relies on the inverse method, which lacks an efficient and logical parameter estimation strategy. In this study, a parameter-by-parameter (PbP) method based on the theoretical derivation and simplifying assumptions was proposed to estimate the Mollerup isotherm parameters for HIC. The method involves three key steps: (1) linear regression (LR) to estimate the salt-protein interaction parameter and the equilibrium constant; (2) linear approximation (LA) to estimate the stoichiometric parameter and the maximum binding capacity; and (3) inverse method to estimate the protein-protein interaction parameter and the kinetic coefficient. The results indicated that the LR step should be used for dilution condition (loading factor below 5%), while the LA step should be conducted when the isotherm is in the transition or nonlinear regions. Six numerical experiments were conducted to implement the PbP method. The results demonstrated that the PbP method developed allows for the systematic estimation of HIC parameters one-by-one, effectively reducing the number of parameters required for inverse method estimation from six to two. This helps prevent non-identifiability of structural parameters. The feasibility of the PbP-HIC method was further validated by real-world experiments. Moreover, the PbP method enhances the mechanistic understanding of adsorption behavior of HIC and shows a promising application to other stoichiometric displacement model-derived isotherms.

Hybrid model development for parameter estimation and process optimization of hydrophobic interaction chromatography

Hydrophobic Interaction Chromatography (HIC) is often employed as a polishing step to remove aggregates for the purification of therapeutic proteins in the biopharmaceutical industry. To accelerate the process development and save the costs of performing time- and resource-intensive experiments, advanced model-based process design and optimization are necessary. Due to the unclear adsorption mechanism of the salt-dependent interaction between the protein and resin, the development of an accurate mechanistic model to describe the complex HIC behavior is challenging. In this work, an isotherm derived from Wang et al. is modified by adding three extra parameters together with an equilibrium dispersive model to represent the HIC process. To reduce the development effort of isotherm equations and extract missing information from the available data, a hybrid model is constructed by combining a simple and well-known multi-component Langmuir isotherm (MCL) with a neural network (NN). It is observed that the structure of the hybrid model is of critical importance to the accuracy of the developed model. During parameter estimation, a regularization strategy is incorporated to prevent overfitting. Furthermore, the impact of NN structures and regularization rates are comprehensively investigated. One of the interesting findings was that a simple NN with one hidden layer with two nodes and sigmoid as the activation function, significantly outperforms the mechanistic model, with a 62% improvement in accuracy in calibration and 31.4% in validation. To ensure the generalizability of the developed hybrid model, an in-silico dataset is generated using the mechanistic model to test the extrapolation capability of the hybrid model. Process optimization is also carried out to find the optimal operating conditions under product quality constraints using the developed hybrid model.