Drug Leaching Properties of Vancomycin Loaded Mesoporous Hydroxyapatite as Bone Substitutes

Melatonin-loaded mesoporous zinc- and gallium-doped hydroxyapatite nanoparticles to control infection and bone repair

Effective treatment of infected bone defects resulting from multi-drug resistant bacteria (MDR) has emerged as a significant clinical challenge, highlighting the pressing demand for potent antibacterial bone graft substitutes. Mesoporous nanoparticles have been introduced as a promising class of biomaterials offering significant properties for treating bone infections. Herein, we synthesize antibacterial mesoporous hydroxyapatite substituted with zinc and gallium (Zn-Ga:mHA) nanoparticles using a facile sol-gel method. The resulting mesoporous nanoparticles are applied for the controlled release of melatonin (Mel). Zn-Ga:mHA nanoparticles with an average particle size of 36 ± 3 nm and pore size of 10.6 ± 0.4 nm reveal a Mel loading efficiency of 58 ± 1%. Results show that 50% of Mel is released within 20 h and its long-term release is recorded up to 50 h. The Zn-Ga:mHA nanoparticles exhibit highly effective antibacterial performance as reflected by a 19 ± 1% and 8 ± 2% viability reduction in Escherichia coli and Staphylococcus bacteria, respectively. Noticeably, Mel-loaded Zn-Ga:mHA nanoparticles are also cytocompatible and stimulate in vitro osteogenic differentiation of human mesenchymal stem cells (hMSCs) without any osteoinductive factor. In vivo studies in a rabbit skull also show significant regeneration of bone during 14 days. In summary, Mel-loaded Zn-Ga:mHA nanoparticles provide great potential as an antibacterial and osteogenic component in bone substitutes like hydrogels, scaffolds, and coatings.

Hydrothermal Extraction and Characterization of Natural Hydroxyapatite from Waste Bovine Femur Bone

The management of large amounts of bio-wastes, such as bovine femurs from kitchens and slaughterhouses, has long been a challenging issue. However, through the utilization of a hydrothermal process, it is possible to transform these bio-wastes into valuable products. In this study, we focused on extracting hydroxyapatite (HAp), the primary inorganic component of bovine femurs, for potential use in bone tissue engineering scaffolds. By subjecting the femurs to hydrothermal treatment at varying times and solvents, we successfully decomposed and removed the organic matter present, resulting in the extraction of HAp. To comprehensively evaluate the properties of the extracted HAp, we employed several characterization techniques that provided valuable insights into the structure, morphology, and elemental composition of the extracted HAp. Furthermore, we conducted a Cell Counting Kit-8 assay, which confirmed the favorable biocompatibility of the extracted HAp. Overall, this study highlights the potential of hydrothermal treatment as an environmentally friendly and cost-effective method for handling bio-waste, specifically bovine femurs. The extracted HAp exhibits promising characteristics, making it suitable for a wide range of biomedical applications. This research contributes to the sustainable utilization of bio-waste and underscores the importance of resourceful exploitation for environmental protection.

Synthesis and physicochemical characterization of mesoporous hydroxyapatite and its application in toothpaste formulation

The key characteristics of mesoporous hydroxyapatite, such as high porosity and expansive surface area, along with its biocompatibility with dental tissues and potential as a delivery vehicle for active ingredients, have recently garnered significant research focus. In the present study, mesoporous hydroxyapatite was synthesized using a precipitation technique and was subsequently characterized via X-ray diffraction, Fourier transform infrared, dynamic light scattering, field emission scanning electron microscopy and N2 adsorption-desorption isotherms. The results revealed that the synthesized mesopore particles exhibited significant adsorption potential, and were thereby considered a carrier of thymol, an effective antibacterial on oral pathogens. Specifically, mesoporous hydroxyapatite's surface area and pore volume were approximately 2.66-fold and 1.95-fold higher than hydroxyapatite's. A statistically significant divergence in the release profiles of thymol from thymol-loaded mesoporous hydroxyapatite and thymol-loaded hydroxyapatite was noted, as indicated by the similarity factor (f2 < 50). Evaluation of organoleptic parameters (taste, odor, smoothness, appearance) showed that thymol-loaded mesoporous hydroxyapatite toothpaste had superior organoleptic attributes compared to thymol-loaded hydroxyapatite toothpaste. However, both formulations were acceptable regarding pH and stability and were desirable regarding abrasiveness with no significant difference compared to the standard formulation (p > 0.05). Overall, the findings demonstrate the suitability of mesoporous hydroxyapatite as an abrasive material for developing hydroxyapatite-based toothpaste formulations.

Effects of Various Ripening Media on the Mesoporous Structure and Morphology of Hydroxyapatite Powders

Mesoporous hydroxyapatite (HA) materials demonstrate advantages as catalysts and as support systems for catalysis, as adsorbent materials for removing contamination from soil and water, and as nanocarriers of functional agents for bone-related therapies. The present research demonstrates the possibility of the enlargement of the Brunauer-Emmett-Teller specific surface area (SSA), pore volume, and average pore diameter via changing the synthesis medium and ripening the material in the mother solution after the precipitation processes have been completed. HA powders were investigated via chemical analysis, X-ray diffraction analysis, Fourier-transform IR spectroscopy, transmission electron microscopy (TEM), and scanning (SEM) electron microscopy. Their SSA, pore volume, and pore-size distributions were determined via low-temperature nitrogen adsorption measurements, the zeta potential was established, and electron paramagnetic resonance (EPR) spectroscopy was performed. When the materials were synthesized in water-ethanol and water-acetone media, the SSA and total pore volume were 52.1 m²g^-1 and 116.4 m²g^-1, and 0.231 and 0.286 cm³g^-1, respectively. After ripening for 21 days, the particle morphology changed, the length/width aspect ratio decreased, and looser and smaller powder agglomerates were obtained. These changes in their characteristics led to an increase in SSA for the water and water-ethanol samples, while pore volume demonstrated a multiplied increase for all samples, reaching 0.593 cm³g^-1 for the water-acetone sample.

Molecular Complex of HSIM-loaded Polymeric Nanoparticles: Potential Carriers in Osteoporosis

BACKGROUND

Statins, especially simvastatin promote bone formation by stimulating the activity of osteoblasts and suppressing osteoclast activity via the BMP-Smad signaling pathway. Statins present the liver first-pass metabolism. This study attempts to fabricate and evaluate simvastatin functionalized hydroxyapatite encapsulated in poly(lactic-co-glycolic) acid (PLGA) nanoparticles (HSIM-PLGA NPs) administered subcutaneously with sustained release properties for effective management of osteoporosis.

METHODS

Simvastatin functionalized hydroxyapatite (HSIM) was prepared by stirring and validated by docking studies, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD). Further, HSIM-loaded PLGA nanoparticles (HSIM-PLGA NPs) were developed via the solvent emulsification method. The nanoparticles were evaluated for zeta potential, particle size, entrapment efficiency, stability studies, and in vitro drug release studies. in vitro binding affinity of nanoparticles for hydroxyapatite was also measured. Bone morphology and its effect on bone mineral density were examined by using a glucocorticoid-induced osteoporosis rat model.

RESULTS

The optimized nanoparticles were found to be amorphous and showed no drug-polymer interaction. The particle size of formulated nanoparticles varied from 196.8 ± 2.27nm to 524.8 ± 5.49 nm and the entrapment efficiency of nanoparticles varied from 41.9 ± 3.44% to 70.8 ± 4.46%, respectively. The nanoparticles showed sustained release behaviour (75% in 24 hr) of the drug followed by non-fickian drug release. The nanoparticles exhibited high binding affinity to bone cell receptors, increasing bone mineral density. A significant difference in calcium and phosphorous levels was observed in disease and treatment rats. Porous bone and significant improvement in porosity were observed in osteoporotic rats and treated rats, respectively (P < 0.05).

CONCLUSION

Bone-targeting nanoparticles incorporating functionalized simvastatin can target bone. Thus, in order to distribute simvastatin subcutaneously for the treatment of osteoporosis, the developed nanoparticles may act as a promising approach.

Inorganic Nanoparticles in Bone Healing Applications

Modern biomedicine aims to develop integrated solutions that use medical, biotechnological, materials science, and engineering concepts to create functional alternatives for the specific, selective, and accurate management of medical conditions. In the particular case of tissue engineering, designing a model that simulates all tissue qualities and fulfills all tissue requirements is a continuous challenge in the field of bone regeneration. The therapeutic protocols used for bone healing applications are limited by the hierarchical nature and extensive vascularization of osseous tissue, especially in large bone lesions. In this regard, nanotechnology paves the way for a new era in bone treatment, repair and regeneration, by enabling the fabrication of complex nanostructures that are similar to those found in the natural bone and which exhibit multifunctional bioactivity. This review aims to lay out the tremendous outcomes of using inorganic nanoparticles in bone healing applications, including bone repair and regeneration, and modern therapeutic strategies for bone-related pathologies.

Hydroxyapatite Nanoparticles in Drug Delivery: Physicochemistry and Applications

Hydroxyapatite (HAP) has been the gold standard in the biomedical field due to its composition and similarity to human bone. Properties such as shape, size, morphology, and ionic substitution can be tailored through the use of different synthesis techniques and compounds. Regardless of the ability to determine its physicochemical properties, a conclusion for the correlation with the biological response it is yet to be found. Hence, a special focus on the most desirable properties for an appropriate biological response needs to be addressed. This review provides an overview of the fundamental properties of hydroxyapatite nanoparticles and the characterization of physicochemical properties involved in their biological response and role as a drug delivery system. A summary of the main chemical properties and applications of hydroxyapatite, the advantages of using nanoparticles, and the influence of shape, size, functional group, morphology, and crystalline phase in the biological response is presented. A special emphasis was placed on the analysis of chemical and physical interactions of the nanoparticles and the cargo, which was explained through the use of spectroscopic and physical techniques such as FTIR, Raman, XRD, SEM, DLS, and BET. We discuss the properties tailored for hydroxyapatite nanoparticles for a specific biomolecule based on the compilation of studies performed on proteins, peptides, drugs, and genetic material.

Antibacterial Poly(ε-CL)/Hydroxyapatite Electrospun Fibers Reinforced by Poly(ε-CL)-b-poly(ethylene phosphoric acid)

In bone surgery and orthopedics, bioresorbable materials can be helpful in bone repair and countering post-op infections. Explicit antibacterial activity, osteoinductive and osteoconductive effects are essential to achieving this objective. Nonwoven electrospun (ES) fibers are receiving the close attention of physicians as promising materials for wound dressing and tissue engineering; potentially, in high contrast with dense materials, ES mats hamper regeneration of the bone extracellular matrix to a lesser extent. The use of the compositions of inherently biodegradable polyesters (poly(ε-caprolactone) PCL, poly(lactoglycolide), etc.), calcium phosphates and antibiotics is highly prospective, but the task of forming ES fibers from such compositions is complicated by the incompatibility of the main organic and inorganic ingredients, polyesters and calcium phosphates. In the present research we report the synthesis of hydroxyapatite (HAp) nanoparticles with uniform morphology, and demonstrate high efficiency of the block copolymer of PCL and poly(ethylene phosphoric acid) (PEPA) as an efficient compatibilizer for PCL/HAp mixtures that are able to form ES fibers with improved mechanical characteristics. The materials obtained in the presence of vancomycin exhibited incremental drug release against Staphylococcus aureus (St. aureus).

Mesoporous Iron(III)-Doped Hydroxyapatite Nanopowders Obtained via Iron Oxalate

Mesoporous hydroxyapatite (HA) and iron(III)-doped HA (Fe-HA) are attractive materials for biomedical, catalytic, and environmental applications. In the present study, the nanopowders of HA and Fe-HA with a specific surface area up to 194.5 m²/g were synthesized by a simple precipitation route using iron oxalate as a source of Fe³⁺ cations. The influence of Fe³⁺ amount on the phase composition, powders morphology, Brunauer–Emmett–Teller (BET) specific surface area (S), and pore size distribution were investigated, as well as electron paramagnetic resonance and Mössbauer spectroscopy analysis were performed. According to obtained data, the Fe³⁺ ions were incorporated in the HA lattice, and also amorphous Fe oxides were formed contributed to the gradual increase in the S and pore volume of the powders. The Density Functional Theory calculations supported these findings and revealed Fe³⁺ inclusion in the crystalline region with the hybridization among Fe-3d and O-2p orbitals and a partly covalent bond formation, whilst the inclusion of Fe oxides assumed crystallinity damage and rather occurred in amorphous regions of HA nanomaterial. In vitro tests based on the MG-63 cell line demonstrated that the introduction of Fe³⁺ does not cause cytotoxicity and led to the enhanced cytocompatibility of HA.

Synthesis of Calcium Orthophosphates by Chemical Precipitation in Aqueous Solutions: The Effect of the Acidity, Ca/P Molar Ratio, and Temperature on the Phase Composition and Solubility of Precipitates

Studies on chemical precipitation of the calcium orthophosphates have shown that their phase compositions do not vary depending on molar ratio Ca/P but are sensitive to solutions acidity and temperature. These are two key factors that determine the phase transformation progress of metastable phases into less soluble precipitates of the phosphates. It was proposed to compare calcium orthophosphates solubility products with calcium cations quantities in their formulas. It was found that there was a linear correlation between calcium orthophosphates specific solubility products and their molar ratios Ca/P if hydroxyapatite and its Ca-deficient forms were excluded from consideration. It was concluded that the relatively large deviations of their solubility products from the found correlation should be thought of as erroneous data. That is why solubility products were changed in accordance with correlation dependence: pKS for hydroxyapatite was 155, pKS for Ca-deficient hydroxyapatites was 114–155. The solubility isotherms, which were calculated on the basis of the corrected pKS values, coincided with the experimental data on solid-phase titration by Pan and Darvell.

Hydroxyapatite Biosynthesis Obtained from Sea Urchin Spines (Strongylocentrotus purpuratus): Effect of Synthesis Temperature

In this investigation, hydroxyapatite (HA) was synthesized using sea urchin spines (Strongylocentrotus purpuratus) via a precipitation and heat treatment method at three different temperatures (500, 600 and 700 °C). Biosynthesized HA was characterized to determine the vibration of functional groups, morphology, particle size, crystalline structure and chemical composition. For this, Fourier-Transform Infrared Spectroscopy with Attenuated Total Reflectance (FTIR-ATR), Scanning Electron Microscopy (SEM) coupled with Energy Dispersive X-ray Spectroscopy (EDS), X-ray Diffraction (XRD) and X-ray Photoelectron Spectroscopy (XPS) were used, respectively. The FTIR-ATR results reveal that the most defined characteristic HA bonds (O-H, P-O and C-O bonds) were better defined at higher synthesis temperatures. SEM also presented evidence that temperature has a significant effect on morphology. EDS results showed that the Ca/P ratio increased in the samples at higher temperatures. XRD analysis presented the characteristic peaks of HA, showing a lower crystallinity when the synthesis temperature increased. Finally, the XPS confirmed that the material resulting from biosynthesis was HA. Hence, according to these results, the synthesis temperature of HA has a significant effect on the characteristics of the resulting material.