An investigation into the sensory properties of luffa (Luffa cylindrica (L.)) seeds and a comparison to other seeds (flax, sunflower, chia, and hemp)

Consumers are interested in new sustainable ingredients but are unwilling to accept undesirable sensory properties in their food products. Luffa (Luffa cylindrica) is mainly harvested and processed for its fibrous network, which is used as an exfoliator, while its seeds are usually discarded. However, the seeds have been found to have various nutritional benefits. As such, this study investigated the sensory properties of luffa seed powder added to yogurt and compared it to other seed powder (flax, sunflower, chia, and hemp). Consumers (n = 107) evaluated their liking of the different seeds added to yogurt using hedonic scales and the sensory properties using check-all-that-apply (CATA). The luffa seeds when mixed with yogurt were associated with off-colour, off-flavour, metallic, strong flavour, bitter, salty, earthy and decreased consumer liking. The flax and sunflower seeds were found to be sweet, nutty, cooked, mild flavour, and to have a smooth texture. The overall liking scores for the flax and sunflower seed samples were significantly higher than the luffa and hemp samples. Future studies should investigate different drying and roasting treatments to improve the sensory properties of the luffa seeds.

The Influence of Micronization on the Properties of Black Cumin Pressing Waste Material

The purpose of this study was to investigate the effect of micronization on the characteristics of black cumin pressing waste material. The basic composition, amino acid, and fatty acid content of the raw material-specifically, black cumin pressing waste material-were determined. The samples were micronized in a planetary ball mill for periods ranging from 0 to 20 min. The particle sizes of micronized samples of black cumin pressing waste material were then examined using a laser analyzer, the Mastersizer 3000. The structures of the produced micronized powders was examined by X-ray diffraction. Additionally, the FTIR (Fourier-transform infrared) spectra of the micronized samples were recorded. The measurement of phenolic and antiradical properties was conducted both before and after in vitro digestion, and the evaluation of protein digestibility and trypsin inhibition was also conducted. The test results, including material properties, suggest that micronization for 10 min dramatically reduced particle diameters (d50) from 374.7 to 88.7 µm, whereas after 20 min, d50 decreased to only 64.5 µm. The results obtained using FTIR spectroscopy revealed alterations, especially in terms of intensity and, to a lesser extent, the shapes of the bands, indicating a significant impact on the molecular properties of the tested samples. X-ray diffraction profiles revealed that the internal structures of all powders are amorphous, and micronization methods have no effect on the internal structures of powders derived from black cumin pressing waste. Biochemical analyses revealed the viability of utilizing micronized powders from black cumin pressing waste materials as beneficial food additives, since micronization increased total phenolic extraction and antiradical activity.

Physicochemical Properties of Dried and Powdered Pear Pomace

Pear pomace, a byproduct of juice production, represents a valuable reservoir of bioactive compounds with potential health benefits for humans. This study aimed to evaluate the influence of drying method and temperature on pear pomace, specifically focusing on the drying kinetics, grinding characteristics, color, phenolic profile (LC-MS/MS), and antioxidant activities of the powder. Drying using the contact method at 40 °C with microwave assistance demonstrated the shortest duration, whereas freeze-drying was briefer compared to contact-drying without microwave assistance. Freeze-drying resulted in brighter and more easily comminuted pomace. Lyophilized samples also exhibited higher total phenolic compound levels compared to contact-dried ones, correlating with enhanced antioxidant activity. Twenty-one phenolic compounds were identified, with dominant acids being quinic, chlorogenic, and protocatechuic. Flavonoids, primarily isoquercitrin, and rutin, were also presented. Pear pomace dried via contact at 60 °C contained more quinic and protocatechuic acids, while freeze-dried pomace at the same temperature exhibited higher levels of chlorogenic acid, epicatechin, and catechin. The content of certain phenolic components, such as gallic acid and epicatechin, also varied depending on the applied drying temperature.

Micronized Powder of Raspberry Pomace as a Source of Bioactive Compounds

Red raspberries, which contain a variety of nutrients and phytochemicals that are beneficial for human health, can be utilized as a raw material in the creation of several supplements. This research suggests micronized powder of raspberry pomace production. The molecular characteristics (FTIR), sugar, and biological potential (phenolic compounds and antioxidant activity) of micronized raspberry powders were investigated. FTIR spectroscopy results revealed spectral changes in the ranges with maxima at ~1720, 1635, and 1326, as well as intensity changes in practically the entire spectral range analyzed. The discrepancies clearly indicate that the micronization of the raspberry byproduct samples cleaved the intramolecular hydrogen bonds in the polysaccharides present in the samples, thus increasing the respective content of simple saccharides. In comparison to the control powders, more glucose and fructose were recovered from the micronized samples of the raspberry powders. The study's micronized powders were found to contain nine different types of phenolic compounds, including rutin, elagic acid derivatives, cyanidin-3-sophoroside, cyanidin-3-(2-glucosylrutinoside), cyanidin-3-rutinoside, pelargonidin-3-rutinoside, and elagic acid derivatives. Significantly higher concentrations of ellagic acid and ellagic acid derivatives and rutin were found in the micronized samples than in the control sample. The antioxidant potential assessed by ABTS and FRAP significantly increased following the micronization procedure.

Composition, processing, and quality control of whole flaxseed products used to fortify foods

Whole flaxseed (flour) as a good source of omega-3 fatty acid and phytochemicals with excellent nutritional and functional attributes has been used to enrich foods for health promotion and disease prevention. However, several limitations and contemporary challenges still impact the development of whole flaxseed (flour)-enriched products on the global market, such as naturally occurring antinutritional factors and entrapment of nutrients within food matrix. Whole flaxseed (flour) with different existing forms could variably alter the techno-functional performance of food matrix, and ultimately affect the edible qualities of fortified food products. The potential interaction mechanism between the subject and object components in fortified products has not been elucidated yet. Hence, in this paper, the physical structure and component changes of flaxseed (flour) by pretreatments coupled with their potential influences on the edible qualities of multiple fortified food products were summarized and analyzed. In addition, several typical food products, including baked, noodle, and dairy products were preferentially selected to investigate the potential influencing mechanisms of flaxseed (flour) on different substrate components. In particular, the altered balance between water absorption of flaxseed protein/gum polysaccharides and the interruption of gluten network, lipid lubrication, lipid-amylose complexes, syneresis, and so forth, were thoroughly elucidated. The overall impact of incorporating whole flaxseed (flour) on the quality and nutritional attributes of fortified food products, coupled with the possible solutions against negative influences are aimed. This paper could provide useful information for expanding the application of whole flaxseed (flour) based on the optimal edible and nutritional properties of fortified food products.

Effects of Wet and Dry Micronization on the GC-MS Identification of the Phenolic Compounds and Antioxidant Properties of Freeze-Dried Spinach Leaves and Stems

Micronization is an emerging technology used in food production, in which the size of particles is reduced to microns in the processing of plant raw materials and by-products, thus making it an interesting research topic. Spinach stems are by-products of spinach leaf processing, but there is little information regarding their processing and possible reuse. In this study, wet and dry ball mill micronization, in combination with freeze drying, was used to process spinach stems and leaves to obtain functional powders. The color and particle size of the micronized spinach leaf and stem powders were evaluated. The antioxidant activity (AA) of the powders and phenolic compounds present in them were determined using GC-MS analysis. The results obtained showed that the dry micronization of leaves and stems resulted in smoother and brighter powders than wet micronization. Significantly smaller particle sizes were achieved using the dry micronization of the leaves and stems (Dv50 = 19.5 and 10.1 µm, respectively) rather than wet micronization (Dv50 = 84.6 and 112.5 µm, respectively). More phenolic compounds, such as o-coumaric acid and gallic acid, were extracted from the dry-micronized powders. The dry micronization of the stems significantly increased the total phenolic content, and the AA of these powders was also increased. These findings demonstrate that spinach leaves and stems subjected to dry micronization can be valuable functional components of food.

Low-Carbohydrate, High-Protein, and Gluten-Free Bread Supplemented with Poppy Seed Flour: Physicochemical, Sensory, and Spectroscopic Properties

BACKGROUND

This study aimed to determine the effect of poppy seed flour (PF) on the physicochemical and spectroscopic properties of low-carbohydrate, high-protein, and gluten-free bread.

METHODS

The changes at the molecular level were assessed in bread using attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). Bread prepared with buckwheat, flaxseed, and pea protein was enriched with PF at a concentration of 5-15%.

RESULTS

The results showed that the pasting parameters of dough supplemented with PF were significantly decreased compared to the control sample. The obtained bread samples were characterized by good quality and had 14.6% of carbohydrate, 16.3% of protein, 10.2% of fiber, and 4.0% of fat, with a caloric value of 177 kcal/100 g. The addition of PF had little influence on crumb mechanical properties. The ATR-FTIR analyses revealed spectral changes in the region related to protein and carbohydrate structures, as well as changes in band intensity characteristic of α-1,4-glycoside and α-1,6-glycoside bonds. The analyses showed that the main starch skeleton remained clearly visible.

CONCLUSIONS

PF up to 10% can be potentially applied as a functional ingredient in the production of bread based on buckwheat and linseed flour. Such low-carbohydrate bread can be particularly useful to diabetics.

Rye Flour and Rye Bran: New Perspectives for Use

Rye (Secale cereale L.) is abundantly cultivated in countries like Europe and North America, particularly in regions where soil and climate conditions are unfavorable for the growth of other cereals. Among all the cereals generally consumed by human beings, rye grains are characterized by the presence of the highest content of fiber. They are also a rich source of many phytochemical compounds, which are mainly distributed in the outer parts of the grain. This review focuses on the current knowledge regarding the characteristics of rye bran and wholemeal rye flour, as well as their applications in the production of both food and nonfood products. Previous studies have shown that the physicochemical properties of ground rye products are determined by the type of milling technique used to grind the grains. In addition, the essential biologically active compounds found in rye grains were isolated and characterized. Subsequently, the possibility of incorporating wholemeal rye flour, rye bran, and other compounds extracted from rye bran into different industrial products is discussed.