1
|
Sripada SA, Hosseini M, Ramesh S, Wang J, Ritola K, Menegatti S, Daniele MA. Advances and opportunities in process analytical technologies for viral vector manufacturing. Biotechnol Adv 2024; 74:108391. [PMID: 38848795 DOI: 10.1016/j.biotechadv.2024.108391] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/14/2023] [Revised: 03/14/2024] [Accepted: 05/29/2024] [Indexed: 06/09/2024]
Abstract
Viral vectors are an emerging, exciting class of biologics whose application in vaccines, oncology, and gene therapy has grown exponentially in recent years. Following first regulatory approval, this class of therapeutics has been vigorously pursued to treat monogenic disorders including orphan diseases, entering hundreds of new products into pipelines. Viral vector manufacturing supporting clinical efforts has spurred the introduction of a broad swath of analytical techniques dedicated to assessing the diverse and evolving panel of Critical Quality Attributes (CQAs) of these products. Herein, we provide an overview of the current state of analytics enabling measurement of CQAs such as capsid and vector identities, product titer, transduction efficiency, impurity clearance etc. We highlight orthogonal methods and discuss the advantages and limitations of these techniques while evaluating their adaptation as process analytical technologies. Finally, we identify gaps and propose opportunities in enabling existing technologies for real-time monitoring from hardware, software, and data analysis viewpoints for technology development within viral vector biomanufacturing.
Collapse
Affiliation(s)
- Sobhana A Sripada
- Department of Chemical and Biomolecular Engineering, North Carolina State University, 911 Partners Way, Raleigh, NC, 27695, USA
| | - Mahshid Hosseini
- Joint Department of Biomedical Engineering, North Carolina State University, and University of North Carolina, Chapel Hill, 911 Oval Dr., Raleigh, NC 27695, USA
| | - Srivatsan Ramesh
- Department of Chemical and Biomolecular Engineering, North Carolina State University, 911 Partners Way, Raleigh, NC, 27695, USA
| | - Junhyeong Wang
- Joint Department of Biomedical Engineering, North Carolina State University, and University of North Carolina, Chapel Hill, 911 Oval Dr., Raleigh, NC 27695, USA
| | - Kimberly Ritola
- North Carolina Viral Vector Initiative in Research and Learning (NC-VVIRAL), North Carolina State University, 890 Oval Dr, Raleigh, NC 27695, USA; Neuroscience Center, Brain Initiative Neurotools Vector Core, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina, USA
| | - Stefano Menegatti
- Department of Chemical and Biomolecular Engineering, North Carolina State University, 911 Partners Way, Raleigh, NC, 27695, USA; North Carolina Viral Vector Initiative in Research and Learning (NC-VVIRAL), North Carolina State University, 890 Oval Dr, Raleigh, NC 27695, USA; Biomanufacturing Training and Education Center, North Carolina State University, 890 Main Campus Dr, Raleigh, NC 27695, USA.
| | - Michael A Daniele
- Joint Department of Biomedical Engineering, North Carolina State University, and University of North Carolina, Chapel Hill, 911 Oval Dr., Raleigh, NC 27695, USA; North Carolina Viral Vector Initiative in Research and Learning (NC-VVIRAL), North Carolina State University, 890 Oval Dr, Raleigh, NC 27695, USA; Department of Electrical and Computer Engineering, North Carolina State University, 890 Oval Dr, Raleigh, NC 27695, USA.
| |
Collapse
|
2
|
Sebastian M, Goldrick S, Cheeks M, Turner R, Farid SS. Enhanced harvest performance predictability through advanced multivariate data analysis of mammalian cell culture particle size distribution. Biotechnol Bioeng 2024; 121:2365-2377. [PMID: 37916475 DOI: 10.1002/bit.28571] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/30/2023] [Revised: 09/12/2023] [Accepted: 09/21/2023] [Indexed: 11/03/2023]
Abstract
The industry's pursuit for higher antibody production has led to increased cell density cultures that impact the performance of subsequent product recovery steps. This increase in cell concentration has highlighted the critical role of solids concentration in centrifugation yield, while recent product degradation cases have shed light on the impact of cell lysis on product quality. Current methods for measuring solids concentration and cell lysis are not suited for early-stage high-throughput experimentation, which means that these cell culture outputs are not well characterized in early process development. This article describes a novel approach that leveraged the data from a widely-used automated cell counter (Vi-CELL™ XR) to accurately predict solids concentration and a common cell lysis indicator represented as lactate dehydrogenase (LDH) release. For this purpose, partial least squares (PLS) models were derived with k-fold cross-validation from the particle size distribution data generated by the cell counter. The PLS models showed good predictive potential for both LDH release and solids concentration. This novel approach reduced the time required for evaluating the solids concentration and LDH for a typical high-throughput cell culture system (with 48 bioreactors in parallel) from around 7 h down to a few minutes.
Collapse
Affiliation(s)
- Martina Sebastian
- Department of Biochemical Engineering, University College London, London, UK
| | - Stephen Goldrick
- Department of Biochemical Engineering, University College London, London, UK
| | - Matthew Cheeks
- Cell Culture & Fermentation Sciences, Biopharmaceuticals Development, R&D, AstraZeneca, Cambridge, UK
| | - Richard Turner
- Purification Process Sciences, Biopharmaceuticals Development, R&D, AstraZeneca, Cambridge, UK
| | - Suzanne S Farid
- Department of Biochemical Engineering, University College London, London, UK
| |
Collapse
|
3
|
Dietrich A, Schiemer R, Kurmann J, Zhang S, Hubbuch J. Raman-based PAT for VLP precipitation: systematic data diversification and preprocessing pipeline identification. Front Bioeng Biotechnol 2024; 12:1399938. [PMID: 38882637 PMCID: PMC11177211 DOI: 10.3389/fbioe.2024.1399938] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/12/2024] [Accepted: 05/13/2024] [Indexed: 06/18/2024] Open
Abstract
Virus-like particles (VLPs) are a promising class of biopharmaceuticals for vaccines and targeted delivery. Starting from clarified lysate, VLPs are typically captured by selective precipitation. While VLP precipitation is induced by step-wise or continuous precipitant addition, current monitoring approaches do not support the direct product quantification, and analytical methods usually require various, time-consuming processing and sample preparation steps. Here, the application of Raman spectroscopy combined with chemometric methods may allow the simultaneous quantification of the precipitated VLPs and precipitant owing to its demonstrated advantages in analyzing crude, complex mixtures. In this study, we present a Raman spectroscopy-based Process Analytical Technology (PAT) tool developed on batch and fed-batch precipitation experiments of Hepatitis B core Antigen VLPs. We conducted small-scale precipitation experiments providing a diversified data set with varying precipitation dynamics and backgrounds induced by initial dilution or spiking of clarified Escherichia coli-derived lysates. For the Raman spectroscopy data, various preprocessing operations were systematically combined allowing the identification of a preprocessing pipeline, which proved to effectively eliminate initial lysate composition variations as well as most interferences attributed to precipitates and the precipitant present in solution. The calibrated partial least squares models seamlessly predicted the precipitant concentration with R 2 of 0.98 and 0.97 in batch and fed-batch experiments, respectively, and captured the observed precipitation trends with R 2 of 0.74 and 0.64. Although the resolution of fine differences between experiments was limited due to the observed non-linear relationship between spectral data and the VLP concentration, this study provides a foundation for employing Raman spectroscopy as a PAT sensor for monitoring VLP precipitation processes with the potential to extend its applicability to other phase-behavior dependent processes or molecules.
Collapse
Affiliation(s)
- Annabelle Dietrich
- Institute of Process Engineering in Life Sciences, Section IV: Biomolecular Separation Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
| | - Robin Schiemer
- Institute of Process Engineering in Life Sciences, Section IV: Biomolecular Separation Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
| | - Jasper Kurmann
- Institute of Process Engineering in Life Sciences, Section IV: Biomolecular Separation Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
| | - Shiqi Zhang
- Institute of Process Engineering in Life Sciences, Section IV: Biomolecular Separation Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
| | - Jürgen Hubbuch
- Institute of Process Engineering in Life Sciences, Section IV: Biomolecular Separation Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
| |
Collapse
|
4
|
Wang J, Chen J, Studts J, Wang G. Simultaneous prediction of 16 quality attributes during protein A chromatography using machine learning based Raman spectroscopy models. Biotechnol Bioeng 2024; 121:1729-1738. [PMID: 38419489 DOI: 10.1002/bit.28679] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/14/2023] [Revised: 01/29/2024] [Accepted: 02/10/2024] [Indexed: 03/02/2024]
Abstract
Several key technologies for advancing biopharmaceutical manufacturing depend on the successful implementation of process analytical technologies that can monitor multiple product quality attributes in a continuous in-line setting. Raman spectroscopy is an emerging technology in the biopharma industry that promises to fit this strategic need, yet its application is not widespread due to limited success for predicting a meaningful number of quality attributes. In this study, we addressed this very problem by demonstrating new capabilities for preprocessing Raman spectra using a series of Butterworth filters. The resulting increase in the number of spectral features is paired with a machine learning algorithm and laboratory automation hardware to drive the automated collection and training of a calibration model that allows for the prediction of 16 different product quality attributes in an in-line mode. The demonstrated ability to generate these Raman-based models for in-process product quality monitoring is the breakthrough to increase process understanding by delivering product quality data in a continuous manner. The implementation of this multiattribute in-line technology will create new workflows within process development, characterization, validation, and control.
Collapse
Affiliation(s)
- Jiarui Wang
- Late Stage Downstream Process Development, Boehringer Ingelheim Pharma GmbH/Co. KG, Biberach an der Riss, Germany
| | - Jingyi Chen
- Late Stage Downstream Process Development, Boehringer Ingelheim Pharma GmbH/Co. KG, Biberach an der Riss, Germany
- Bioprocess development and modelling, Karlsruhe Institute of Technology, Karlsruhe, Germany
| | - Joey Studts
- Late Stage Downstream Process Development, Boehringer Ingelheim Pharma GmbH/Co. KG, Biberach an der Riss, Germany
| | - Gang Wang
- Late Stage Downstream Process Development, Boehringer Ingelheim Pharma GmbH/Co. KG, Biberach an der Riss, Germany
| |
Collapse
|
5
|
Nitika N, Keerthiveena B, Thakur G, Rathore AS. Convolutional Neural Networks Guided Raman Spectroscopy as a Process Analytical Technology (PAT) Tool for Monitoring and Simultaneous Prediction of Monoclonal Antibody Charge Variants. Pharm Res 2024; 41:463-479. [PMID: 38366234 DOI: 10.1007/s11095-024-03663-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/26/2023] [Accepted: 01/18/2024] [Indexed: 02/18/2024]
Abstract
BACKGROUND Charge related heterogeneities of monoclonal antibody (mAb) based therapeutic products are increasingly being considered as a critical quality attribute (CQA). They are typically estimated using analytical cation exchange chromatography (CEX), which is time consuming and not suitable for real time control. Raman spectroscopy coupled with artificial intelligence (AI) tools offers an opportunity for real time monitoring and control of charge variants. OBJECTIVE We present a process analytical technology (PAT) tool for on-line and real-time charge variant determination during process scale CEX based on Raman spectroscopy employing machine learning techniques. METHOD Raman spectra are collected from a reference library of samples with distribution of acidic, main, and basic species from 0-100% in a mAb concentration range of 0-20 g/L generated from process-scale CEX. The performance of different machine learning techniques for spectral processing is compared for predicting different charge variant species. RESULT A convolutional neural network (CNN) based model was successfully calibrated for quantification of acidic species, main species, basic species, and total protein concentration with R2 values of 0.94, 0.99, 0.96 and 0.99, respectively, and the Root Mean Squared Error (RMSE) of 0.1846, 0.1627, and 0.1029 g/L, respectively, and 0.2483 g/L for the total protein concentration. CONCLUSION We demonstrate that Raman spectroscopy combined with AI-ML frameworks can deliver rapid and accurate determination of product related impurities. This approach can be used for real time CEX pooling decisions in mAb production processes, thus enabling consistent charge variant profiles to be achieved.
Collapse
Affiliation(s)
- Nitika Nitika
- Department of Chemical Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi, 110016, India
| | - B Keerthiveena
- School of Artificial Intelligence, Indian Institute of Technology Delhi, New Delhi, India
| | - Garima Thakur
- Department of Chemical Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi, 110016, India
| | - Anurag S Rathore
- Department of Chemical Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi, 110016, India.
- School of Artificial Intelligence, Indian Institute of Technology Delhi, New Delhi, India.
| |
Collapse
|
6
|
Schiemer R, Rüdt M, Hubbuch J. Generative data augmentation and automated optimization of convolutional neural networks for process monitoring. Front Bioeng Biotechnol 2024; 12:1228846. [PMID: 38357704 PMCID: PMC10864647 DOI: 10.3389/fbioe.2024.1228846] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/25/2023] [Accepted: 01/15/2024] [Indexed: 02/16/2024] Open
Abstract
Chemometric modeling for spectral data is considered a key technology in biopharmaceutical processing to realize real-time process control and release testing. Machine learning (ML) models have been shown to increase the accuracy of various spectral regression and classification tasks, remove challenging preprocessing steps for spectral data, and promise to improve the transferability of models when compared to commonly applied, linear methods. The training and optimization of ML models require large data sets which are not available in the context of biopharmaceutical processing. Generative methods to extend data sets with realistic in silico samples, so-called data augmentation, may provide the means to alleviate this challenge. In this study, we develop and implement a novel data augmentation method for generating in silico spectral data based on local estimation of pure component profiles for training convolutional neural network (CNN) models using four data sets. We simultaneously tune hyperparameters associated with data augmentation and the neural network architecture using Bayesian optimization. Finally, we compare the optimized CNN models with partial least-squares regression models (PLS) in terms of accuracy, robustness, and interpretability. The proposed data augmentation method is shown to produce highly realistic spectral data by adapting the estimates of the pure component profiles to the sampled concentration regimes. Augmenting CNNs with the in silico spectral data is shown to improve the prediction accuracy for the quantification of monoclonal antibody (mAb) size variants by up to 50% in comparison to single-response PLS models. Bayesian structure optimization suggests that multiple convolutional blocks are beneficial for model accuracy and enable transfer across different data sets. Model-agnostic feature importance methods and synthetic noise perturbation are used to directly compare the optimized CNNs with PLS models. This enables the identification of wavelength regions critical for model performance and suggests increased robustness against Gaussian white noise and wavelength shifts of the CNNs compared to the PLS models.
Collapse
Affiliation(s)
- Robin Schiemer
- Institute of Process Engineering in Life Sciences, Section IV: Biomolecular Separation Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
| | - Matthias Rüdt
- Institute of Life Technologies, HES-SO Valais-Wallis, Sion, Switzerland
| | - Jürgen Hubbuch
- Institute of Process Engineering in Life Sciences, Section IV: Biomolecular Separation Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
| |
Collapse
|
7
|
Beattie JW, Rowland-Jones RC, Farys M, Bettany H, Hilton D, Kazarian SG, Byrne B. Application of Raman Spectroscopy to Dynamic Binding Capacity Analysis. APPLIED SPECTROSCOPY 2023; 77:1393-1400. [PMID: 37908083 PMCID: PMC10683347 DOI: 10.1177/00037028231210293] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/16/2023] [Accepted: 09/25/2023] [Indexed: 11/02/2023]
Abstract
Protein A affinity chromatography is a key step in isolation of biotherapeutics (BTs) containing fragment crystallizable regions, including monoclonal and bispecific antibodies. Dynamic binding capacity (DBC) analysis assesses how much BT will bind to a protein A column. DBC reduces with column usage, effectively reducing the amount of recovered product over time. Drug regulatory bodies mandate chromatography resin lifetime for BT isolation, through measurement of parameters including DBC, so this feature is carefully monitored in industrial purification pipelines. High-performance affinity chromatography (HPAC) is typically used to assess the concentration of BT, which when loaded to the column results in significant breakthrough of BT in the flowthrough. HPAC gives an accurate assessment of DBC and how this changes over time but only reports on protein concentration, requires calibration for each new BT analyzed, and can only be used offline. Here we utilized Raman spectroscopy and revealed that this approach is at least as effective as both HPAC and ultraviolet chromatogram methods at monitoring DBC of protein A resins. In addition to reporting on protein concentration, the chemical information in the Raman spectra provides information on aggregation status and protein structure, providing extra quality controls to industrial bioprocessing pipelines. In combination with partial least square (PLS) analysis, Raman spectroscopy can be used to determine the DBC of a BT without prior calibration. Here we performed Raman analysis offline in a 96-well plate format, however, it is feasible to perform this inline. This study demonstrates the power of Raman spectroscopy as a significantly improved approach to DBC monitoring in industrial pipelines.
Collapse
Affiliation(s)
- James W. Beattie
- Department of Life Sciences, Imperial College London, London, UK
- Department of Chemical Engineering, Imperial College London, London, UK
| | - Ruth C. Rowland-Jones
- Biopharm Process Research, Medicine Development and Supply, GSK R&D, Stevenage, Hertfordshire, UK
| | - Monika Farys
- Biopharm Process Research, Medicine Development and Supply, GSK R&D, Stevenage, Hertfordshire, UK
| | - Hamish Bettany
- Biopharm Process Research, Medicine Development and Supply, GSK R&D, Stevenage, Hertfordshire, UK
| | - David Hilton
- Biopharm Process Research, Medicine Development and Supply, GSK R&D, Stevenage, Hertfordshire, UK
| | | | - Bernadette Byrne
- Department of Life Sciences, Imperial College London, London, UK
| |
Collapse
|
8
|
Wang J, Chen J, Studts J, Wang G. Automated calibration and in-line measurement of product quality during therapeutic monoclonal antibody purification using Raman spectroscopy. Biotechnol Bioeng 2023; 120:3288-3298. [PMID: 37534801 DOI: 10.1002/bit.28514] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/06/2023] [Revised: 05/12/2023] [Accepted: 07/11/2023] [Indexed: 08/04/2023]
Abstract
Current manufacturing and development processes for therapeutic monoclonal antibodies demand increasing volumes of analytical testing for both real-time process controls and high-throughput process development. The feasibility of using Raman spectroscopy as an in-line product quality measuring tool has been recently demonstrated and promises to relieve this analytical bottleneck. Here, we resolve time-consuming calibration process that requires fractionation and preparative experiments covering variations of product quality attributes (PQAs) by engineering an automation system capable of collecting Raman spectra on the order of hundreds of calibration points from two to three stock seed solutions differing in protein concentration and aggregate level using controlled mixing. We used this automated system to calibrate multi-PQA models that accurately measured product concentration and aggregation every 9.3 s using an in-line flow-cell. We demonstrate the application of a nonlinear calibration model for monitoring product quality in real-time during a biopharmaceutical purification process intended for clinical and commercial manufacturing. These results demonstrate potential feasibility to implement quality monitoring during GGMP manufacturing as well as to increase chemistry, manufacturing, and controls understanding during process development, ultimately leading to more robust and controlled manufacturing processes.
Collapse
Affiliation(s)
- Jiarui Wang
- Late Stage Downstream Process Development, Boehringer Ingelheim Pharma GmbH/Co. KG, Biberach an der Riss, Germany
| | - Jingyi Chen
- Late Stage Downstream Process Development, Boehringer Ingelheim Pharma GmbH/Co. KG, Biberach an der Riss, Germany
- Karlsruhe Institute of Technology, Karlsruhe, Germany
| | - Joey Studts
- Late Stage Downstream Process Development, Boehringer Ingelheim Pharma GmbH/Co. KG, Biberach an der Riss, Germany
| | - Gang Wang
- Late Stage Downstream Process Development, Boehringer Ingelheim Pharma GmbH/Co. KG, Biberach an der Riss, Germany
| |
Collapse
|
9
|
Tomažič S, Škrjanc I. Halfway to Automated Feeding of Chinese Hamster Ovary Cells. SENSORS (BASEL, SWITZERLAND) 2023; 23:6618. [PMID: 37514911 PMCID: PMC10383754 DOI: 10.3390/s23146618] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/26/2023] [Revised: 07/14/2023] [Accepted: 07/21/2023] [Indexed: 07/30/2023]
Abstract
This paper presents a comprehensive study on the development of models and soft sensors required for the implementation of the automated bioreactor feeding of Chinese hamster ovary (CHO) cells using Raman spectroscopy and chemometric methods. This study integrates various methods, such as partial least squares regression and variable importance in projection and competitive adaptive reweighted sampling, and highlights their effectiveness in overcoming challenges such as high dimensionality, multicollinearity and outlier detection in Raman spectra. This paper emphasizes the importance of data preprocessing and the relationship between independent and dependent variables in model construction. It also describes the development of a simulation environment whose core is a model of CHO cell kinetics. The latter allows the development of advanced control algorithms for nutrient dosing and the observation of the effects of different parameters on the growth and productivity of CHO cells. All developed models were validated and demonstrated to have a high robustness and predictive accuracy, which were reflected in a 40% reduction in the root mean square error compared to established methods. The results of this study provide valuable insights into the practical application of these methods in the field of monitoring and automated cell feeding and make an important contribution to the further development of process analytical technology in the bioprocess industry.
Collapse
Affiliation(s)
- Simon Tomažič
- Faculty of Electrical Engineering, University of Ljubljana, 1000 Ljubljana, Slovenia
| | - Igor Škrjanc
- Faculty of Electrical Engineering, University of Ljubljana, 1000 Ljubljana, Slovenia
| |
Collapse
|
10
|
Steinmann SN, Wang Q, Seh ZW. How machine learning can accelerate electrocatalysis discovery and optimization. MATERIALS HORIZONS 2023; 10:393-406. [PMID: 36541226 DOI: 10.1039/d2mh01279k] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Advances in machine learning (ML) provide the means to bypass bottlenecks in the discovery of new electrocatalysts using traditional approaches. In this review, we highlight the currently achieved work in ML-accelerated discovery and optimization of electrocatalysts via a tight collaboration between computational models and experiments. First, the applicability of available methods for constructing machine-learned potentials (MLPs), which provide accurate energies and forces for atomistic simulations, are discussed. Meanwhile, the current challenges for MLPs in the context of electrocatalysis are highlighted. Then, we review the recent progress in predicting catalytic activities using surrogate models, including microkinetic simulations and more global proxies thereof. Several typical applications of using ML to rationalize thermodynamic proxies and predict the adsorption and activation energies are also discussed. Next, recent developments of ML-assisted experiments for catalyst characterization, synthesis optimization and reaction condition optimization are illustrated. In particular, the applications in ML-enhanced spectra analysis and the use of ML to interpret experimental kinetic data are highlighted. Additionally, we also show how robotics are applied to high-throughput synthesis, characterization and testing of electrocatalysts to accelerate the materials exploration process and how this equipment can be assembled into self-driven laboratories.
Collapse
Affiliation(s)
| | - Qing Wang
- Univ Lyon, ENS de Lyon, CNRS, Laboratoire de Chimie UMR 5182, Lyon, France.
| | - Zhi Wei Seh
- Institute of Materials Research and Engineering, Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis, 138634, Singapore.
| |
Collapse
|
11
|
Rathore AS, Thakur G, Kateja N. Continuous integrated manufacturing for biopharmaceuticals: A new paradigm or an empty promise? Biotechnol Bioeng 2023; 120:333-351. [PMID: 36111450 DOI: 10.1002/bit.28235] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/05/2022] [Revised: 09/09/2022] [Accepted: 09/11/2022] [Indexed: 01/13/2023]
Abstract
Continuous integrated bioprocessing has elicited considerable interest from the biopharma industry for the many purported benefits it promises. Today many major biopharma manufacturers around the world are engaged in the development of continuous process platforms for their products. In spite of great potential, the path toward continuous integrated bioprocessing remains unclear for the biologics industry due to legacy infrastructure, process integration challenges, vague regulatory guidelines, and a diverging focus toward novel therapies. In this article, we present a review and perspective on this topic. We explore the status of the implementation of continuous integrated bioprocessing among biopharmaceutical manufacturers. We also present some of the key hurdles that manufacturers are likely to face during this implementation. Finally, we hypothesize that the real impact of continuous manufacturing is likely to come when the cost of manufacturing is a substantial portion of the cost of product development, such as in the case of biosimilar manufacturing and emerging economies.
Collapse
Affiliation(s)
- Anurag S Rathore
- Department of Chemical Engineering, Indian Institute of Technology, New Delhi, India
| | - Garima Thakur
- Department of Chemical Engineering, Indian Institute of Technology, New Delhi, India
| | - Nikhil Kateja
- Department of Chemical Engineering, Indian Institute of Technology, New Delhi, India
| |
Collapse
|
12
|
Performance Comparison of Recombinant Baculovirus and Rabies Virus-like Particles production Using Two Culture Platforms. Vaccines (Basel) 2022; 11:vaccines11010039. [PMID: 36679884 PMCID: PMC9867115 DOI: 10.3390/vaccines11010039] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/19/2022] [Revised: 12/08/2022] [Accepted: 12/20/2022] [Indexed: 12/29/2022] Open
Abstract
This work aimed to assess, following upstream optimization in Schott flasks, the scalability from this culture platform to a stirred-tank bioreactor in order to yield rabies-recombinant baculovirus, bearing genes of G (BVG) and M (BVM) proteins, and to obtain rabies virus-like particles (VLP) from them, using Sf9 insect cells as a host. Equivalent assays in Schott flasks and a bioreactor were performed to compare both systems and a multivariate statistical approach was also carried out to maximize VLP production as a function of BVG and BVM's multiplicity of infection (MOI) and harvest time (HT). Viable cell density, cell viability, virus titer, BVG and BVM quantification by dot-blot, and BVG quantification by Enzyme-Linked Immunosorbent Assay (ELISA) were monitored throughout the assays. Furthermore, transmission electron microscopy was used to characterize rabies VLP. The optimal combination for maximum VLP expression was BVG and BVM MOI of 2.3 pfu/cell and 5.1 pfu/cell, respectively, and 108 h of harvest time. The current study confirmed that the utilization of Schott flasks and a benchtop bioreactor under the conditions applied herein are equivalent regarding the cell death kinetics corresponding to the recombinant baculovirus infection process in Sf9 cells. According to the results, the hydrodynamic and chemical differences in both systems seem to greatly affect the virus and VLP integrity after release.
Collapse
|
13
|
Online 2D Fluorescence Monitoring in Microtiter Plates Allows Prediction of Cultivation Parameters and Considerable Reduction in Sampling Efforts for Parallel Cultivations of Hansenula polymorpha. BIOENGINEERING (BASEL, SWITZERLAND) 2022; 9:bioengineering9090438. [PMID: 36134983 PMCID: PMC9495725 DOI: 10.3390/bioengineering9090438] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/02/2022] [Revised: 08/15/2022] [Accepted: 09/02/2022] [Indexed: 11/23/2022]
Abstract
Multi-wavelength (2D) fluorescence spectroscopy represents an important step towards exploiting the monitoring potential of microtiter plates (MTPs) during early-stage bioprocess development. In combination with multivariate data analysis (MVDA), important process information can be obtained, while repetitive, cost-intensive sample analytics can be reduced. This study provides a comprehensive experimental dataset of online and offline measurements for batch cultures of Hansenula polymorpha. In the first step, principal component analysis (PCA) was used to assess spectral data quality. Secondly, partial least-squares (PLS) regression models were generated, based on spectral data of two cultivation conditions and offline samples for glycerol, cell dry weight, and pH value. Thereby, the time-wise resolution increased 12-fold compared to the offline sampling interval of 6 h. The PLS models were validated using offline samples of a shorter sampling interval. Very good model transferability was shown during the PLS model application to the spectral data of cultures with six varying initial cultivation conditions. For all the predicted variables, a relative root-mean-square error (RMSE) below 6% was obtained. Based on the findings, the initial experimental strategy was re-evaluated and a more practical approach with minimised sampling effort and elevated experimental throughput was proposed. In conclusion, the study underlines the high potential of multi-wavelength (2D) fluorescence spectroscopy and provides an evaluation workflow for PLS modelling in microtiter plates.
Collapse
|
14
|
Al-madani H, Du H, Yao J, Peng H, Yao C, Jiang B, Wu A, Yang F. Living Sample Viability Measurement Methods from Traditional Assays to Nanomotion. BIOSENSORS 2022; 12:453. [PMID: 35884256 PMCID: PMC9313330 DOI: 10.3390/bios12070453] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/27/2022] [Revised: 06/20/2022] [Accepted: 06/22/2022] [Indexed: 12/18/2022]
Abstract
Living sample viability measurement is an extremely common process in medical, pharmaceutical, and biological fields, especially drug pharmacology and toxicology detection. Nowadays, there are a number of chemical, optical, and mechanical methods that have been developed in response to the growing demand for simple, rapid, accurate, and reliable real-time living sample viability assessment. In parallel, the development trend of viability measurement methods (VMMs) has increasingly shifted from traditional assays towards the innovative atomic force microscope (AFM) oscillating sensor method (referred to as nanomotion), which takes advantage of the adhesion of living samples to an oscillating surface. Herein, we provide a comprehensive review of the common VMMs, laying emphasis on their benefits and drawbacks, as well as evaluating the potential utility of VMMs. In addition, we discuss the nanomotion technique, focusing on its applications, sample attachment protocols, and result display methods. Furthermore, the challenges and future perspectives on nanomotion are commented on, mainly emphasizing scientific restrictions and development orientations.
Collapse
Affiliation(s)
- Hamzah Al-madani
- Cixi Institute of Biomedical Engineering, International Cooperation Base of Biomedical Materials Technology and Application, Chinese Academy of Sciences (CAS), Key Laboratory of Magnetic Materials and Devices, Zhejiang Engineering Research Center for Biomedical Materials, Ningbo Institute of Materials Technology and Engineering, CAS, Ningbo 315201, China; (H.A.-m.); (H.D.); (J.Y.); (H.P.); (C.Y.); (B.J.)
- University of Chinese Academy of Sciences, Beijing 100049, China
| | - Hui Du
- Cixi Institute of Biomedical Engineering, International Cooperation Base of Biomedical Materials Technology and Application, Chinese Academy of Sciences (CAS), Key Laboratory of Magnetic Materials and Devices, Zhejiang Engineering Research Center for Biomedical Materials, Ningbo Institute of Materials Technology and Engineering, CAS, Ningbo 315201, China; (H.A.-m.); (H.D.); (J.Y.); (H.P.); (C.Y.); (B.J.)
- College of Materials Sciences and Opto-Electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Junlie Yao
- Cixi Institute of Biomedical Engineering, International Cooperation Base of Biomedical Materials Technology and Application, Chinese Academy of Sciences (CAS), Key Laboratory of Magnetic Materials and Devices, Zhejiang Engineering Research Center for Biomedical Materials, Ningbo Institute of Materials Technology and Engineering, CAS, Ningbo 315201, China; (H.A.-m.); (H.D.); (J.Y.); (H.P.); (C.Y.); (B.J.)
- College of Materials Sciences and Opto-Electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Hao Peng
- Cixi Institute of Biomedical Engineering, International Cooperation Base of Biomedical Materials Technology and Application, Chinese Academy of Sciences (CAS), Key Laboratory of Magnetic Materials and Devices, Zhejiang Engineering Research Center for Biomedical Materials, Ningbo Institute of Materials Technology and Engineering, CAS, Ningbo 315201, China; (H.A.-m.); (H.D.); (J.Y.); (H.P.); (C.Y.); (B.J.)
- College of Materials Sciences and Opto-Electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Chenyang Yao
- Cixi Institute of Biomedical Engineering, International Cooperation Base of Biomedical Materials Technology and Application, Chinese Academy of Sciences (CAS), Key Laboratory of Magnetic Materials and Devices, Zhejiang Engineering Research Center for Biomedical Materials, Ningbo Institute of Materials Technology and Engineering, CAS, Ningbo 315201, China; (H.A.-m.); (H.D.); (J.Y.); (H.P.); (C.Y.); (B.J.)
- College of Materials Sciences and Opto-Electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Bo Jiang
- Cixi Institute of Biomedical Engineering, International Cooperation Base of Biomedical Materials Technology and Application, Chinese Academy of Sciences (CAS), Key Laboratory of Magnetic Materials and Devices, Zhejiang Engineering Research Center for Biomedical Materials, Ningbo Institute of Materials Technology and Engineering, CAS, Ningbo 315201, China; (H.A.-m.); (H.D.); (J.Y.); (H.P.); (C.Y.); (B.J.)
| | - Aiguo Wu
- Cixi Institute of Biomedical Engineering, International Cooperation Base of Biomedical Materials Technology and Application, Chinese Academy of Sciences (CAS), Key Laboratory of Magnetic Materials and Devices, Zhejiang Engineering Research Center for Biomedical Materials, Ningbo Institute of Materials Technology and Engineering, CAS, Ningbo 315201, China; (H.A.-m.); (H.D.); (J.Y.); (H.P.); (C.Y.); (B.J.)
- Advanced Energy Science and Technology Guangdong Laboratory, Huizhou 516000, China
| | - Fang Yang
- Cixi Institute of Biomedical Engineering, International Cooperation Base of Biomedical Materials Technology and Application, Chinese Academy of Sciences (CAS), Key Laboratory of Magnetic Materials and Devices, Zhejiang Engineering Research Center for Biomedical Materials, Ningbo Institute of Materials Technology and Engineering, CAS, Ningbo 315201, China; (H.A.-m.); (H.D.); (J.Y.); (H.P.); (C.Y.); (B.J.)
- Advanced Energy Science and Technology Guangdong Laboratory, Huizhou 516000, China
| |
Collapse
|
15
|
Banner M, Alosert H, Spencer C, Cheeks M, Farid SS, Thomas M, Goldrick S. A decade in review: use of data analytics within the biopharmaceutical sector. Curr Opin Chem Eng 2021; 34:None. [PMID: 34926134 PMCID: PMC8665905 DOI: 10.1016/j.coche.2021.100758] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/01/2023]
Abstract
There are large amounts of data generated within the biopharmaceutical sector. Traditionally, data analysis methods labelled as multivariate data analysis have been the standard statistical technique applied to interrogate these complex data sets. However, more recently there has been a surge in the utilisation of a broader set of machine learning algorithms to further exploit these data. In this article, the adoption of data analysis techniques within the biopharmaceutical sector is evaluated through a review of journal articles and patents published within the last ten years. The papers objectives are to identify the most dominant algorithms applied across different applications areas within the biopharmaceutical sector and to explore whether there is a trend between the size of the data set and the algorithm adopted.
Collapse
Affiliation(s)
- Matthew Banner
- Department of Biochemical Engineering, University College London, Gower Street, London WC1E 6BT, UK
| | - Haneen Alosert
- Department of Biochemical Engineering, University College London, Gower Street, London WC1E 6BT, UK
| | - Christopher Spencer
- Cell Culture Fermentation Sciences, Biopharmaceutical Development, BioPharmaceuticals R&D, AstraZeneca, Cambridge, UK
| | - Matthew Cheeks
- Cell Culture Fermentation Sciences, Biopharmaceutical Development, BioPharmaceuticals R&D, AstraZeneca, Cambridge, UK
| | - Suzanne S Farid
- Department of Biochemical Engineering, University College London, Gower Street, London WC1E 6BT, UK
| | - Michael Thomas
- Department of Biochemical Engineering, University College London, Gower Street, London WC1E 6BT, UK
- London Centre for Nanotechnology, University College London, Gordon Street, London WC1H 0AH, UK
| | - Stephen Goldrick
- Department of Biochemical Engineering, University College London, Gower Street, London WC1E 6BT, UK
| |
Collapse
|
16
|
Off-Gas-Based Soft Sensor for Real-Time Monitoring of Biomass and Metabolism in Chinese Hamster Ovary Cell Continuous Processes in Single-Use Bioreactors. Processes (Basel) 2021. [DOI: 10.3390/pr9112073] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022] Open
Abstract
In mammalian cell culture, especially in pharmaceutical manufacturing and research, biomass and metabolic monitoring are mandatory for various cell culture process steps to develop and, finally, control bioprocesses. As a common measure for biomass, the viable cell density (VCD) or the viable cell volume (VCV) is widely used. This study highlights, for the first time, the advantages of using VCV instead of VCD as a biomass depiction in combination with an oxygen-uptake- rate (OUR)-based soft sensor for real-time biomass estimation and process control in single-use bioreactor (SUBs) continuous processes with Chinese hamster ovary (CHO) cell lines. We investigated a series of 14 technically similar continuous SUB processes, where the same process conditions but different expressing CHO cell lines were used, with respect to biomass growth and oxygen demand to calibrate our model. In addition, we analyzed the key metabolism of the CHO cells in SUB perfusion processes by exometabolomic approaches, highlighting the importance of cell-specific substrate and metabolite consumption and production rate qS analysis to identify distinct metabolic phases. Cell-specific rates for classical mammalian cell culture key substrates and metabolites in CHO perfusion processes showed a good correlation to qOUR, yet, unexpectedly, not for qGluc. Here, we present the soft-sensoring methodology we developed for qPyr to allow for the real-time approximation of cellular metabolism and usage for subsequent, in-depth process monitoring, characterization and optimization.
Collapse
|
17
|
The role of Raman spectroscopy in biopharmaceuticals from development to manufacturing. Anal Bioanal Chem 2021; 414:969-991. [PMID: 34668998 PMCID: PMC8724084 DOI: 10.1007/s00216-021-03727-4] [Citation(s) in RCA: 28] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/27/2021] [Accepted: 10/08/2021] [Indexed: 12/21/2022]
Abstract
Biopharmaceuticals have revolutionized the field of medicine in the types of active ingredient molecules and treatable indications. Adoption of Quality by Design and Process Analytical Technology (PAT) frameworks has helped the biopharmaceutical field to realize consistent product quality, process intensification, and real-time control. As part of the PAT strategy, Raman spectroscopy offers many benefits and is used successfully in bioprocessing from single-cell analysis to cGMP process control. Since first introduced in 2011 for industrial bioprocessing applications, Raman has become a first-choice PAT for monitoring and controlling upstream bioprocesses because it facilitates advanced process control and enables consistent process quality. This paper will discuss new frontiers in extending these successes in upstream from scale-down to commercial manufacturing. New reports concerning the use of Raman spectroscopy in the basic science of single cells and downstream process monitoring illustrate industrial recognition of Raman’s value throughout a biopharmaceutical product’s lifecycle. Finally, we draw upon a nearly 90-year history in biological Raman spectroscopy to provide the basis for laboratory and in-line measurements of protein quality, including higher-order structure and composition modifications, to support formulation development.
Collapse
|
18
|
Rolinger L, Rüdt M, Hubbuch J. Comparison of UV- and Raman-based monitoring of the Protein A load phase and evaluation of data fusion by PLS models and CNNs. Biotechnol Bioeng 2021; 118:4255-4268. [PMID: 34297358 DOI: 10.1002/bit.27894] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/21/2021] [Revised: 06/16/2021] [Accepted: 07/09/2021] [Indexed: 12/30/2022]
Abstract
A promising application of Process Analytical Technology to the downstream process of monoclonal antibodies (mAbs) is the monitoring of the Protein A load phase as its control promises economic benefits. Different spectroscopic techniques have been evaluated in literature with regard to the ability to quantify the mAb concentration in the column effluent. Raman and Ultraviolet (UV) spectroscopy are among the most promising techniques. In this study, both were investigated in an in-line setup and directly compared. The data of each sensor were analyzed independently with Partial-Least-Squares (PLS) models and Convolutional Neural Networks (CNNs) for regression. Furthermore, data fusion strategies were investigated by combining both sensors in hierarchical PLS models or in CNNs. Among the tested options, UV spectroscopy alone allowed for the most precise and accurate prediction of the mAb concentration. A Root Mean Square Error of Prediction (RMSEP) of 0.013 g L-1 was reached with the UV-based PLS model. The Raman-based PLS model reached an RMSEP of 0.232 g L-1 . The different data fusion techniques did not improve the prediction accuracy above the prediction accuracy of the UV-based PLS model. Data fusion by PLS models seems meritless when combining a very accurate sensor with a less accurate signal. Furthermore, the application of CNNs for UV and Raman spectra did not yield significant improvements in the prediction quality. For the presented application, linear regression techniques seem to be better suited compared with advanced nonlinear regression techniques, like, CNNs. In summary, the results support the application of UV spectroscopy and PLS modeling for future research and development activities aiming to implement spectroscopic real-time monitoring of the Protein A load phase.
Collapse
Affiliation(s)
- Laura Rolinger
- Institute of Engineering in Life Sciences, Section IV: Biomolecular Separation Engineering, Karlsruhe Institute of Technology, Karlsruhe, Germany.,PTDC-P PAT, Hoffmann-La Roche AG, Basel, Switzerland
| | - Matthias Rüdt
- Institute of Engineering in Life Sciences, Section IV: Biomolecular Separation Engineering, Karlsruhe Institute of Technology, Karlsruhe, Germany.,Haute Ecole d'Ingénierie, HES-SO Valais-Wallis, Sion, Switzerland
| | - Jürgen Hubbuch
- Institute of Engineering in Life Sciences, Section IV: Biomolecular Separation Engineering, Karlsruhe Institute of Technology, Karlsruhe, Germany
| |
Collapse
|
19
|
Advanced control strategies for bioprocess chromatography: Challenges and opportunities for intensified processes and next generation products. J Chromatogr A 2021; 1639:461914. [PMID: 33503524 DOI: 10.1016/j.chroma.2021.461914] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/13/2020] [Revised: 01/05/2021] [Accepted: 01/13/2021] [Indexed: 02/08/2023]
Abstract
Recent advances in process analytical technologies and modelling techniques present opportunities to improve industrial chromatography control strategies to enhance process robustness, increase productivity and move towards real-time release testing. This paper provides a critical overview of batch and continuous industrial chromatography control systems for therapeutic protein purification. Firstly, the limitations of conventional industrial fractionation control strategies using in-line UV spectroscopy and on-line HPLC are outlined. Following this, an evaluation of monitoring and control techniques showing promise within research, process development and manufacturing is provided. These novel control strategies combine rapid in-line data capture (e.g. NIR, MALS and variable pathlength UV) with enhanced process understanding obtained from mechanistic and empirical modelling techniques. Finally, a summary of the future states of industrial chromatography control systems is proposed, including strategies to control buffer formulation, product fractionation, column switching and column fouling. The implementation of these control systems improves process capabilities to fulfil product quality criteria as processes are scaled, transferred and operated, thus fast tracking the delivery of new medicines to market.
Collapse
|
20
|
Abstract
This special issue is devoted to new developments in measurement technologies for upstream and downstream bioprocessing [...]
Collapse
|