Enhancement of Biomass and Lipid Productivities of Scenedesmus sp. Cultivated in the Wastewater of the Dairy Industry

Emerging bio-capture strategies for greenhouse gas reduction: Navigating challenges towards carbon neutrality

Greenhouse gas emissions are significantly contributing to climate change, posing one of the serious threats to our planet. Addressing these emissions urgently is imperative to prevent irreversible planetary changes. One effective long-term mitigation strategy is achieving carbon neutrality. Although numerous countries aim for carbon neutrality by 2050, only a few are on track to realize this ambition. Existing technological solutions, including chemical absorption, cryogenic separation, and membrane separation, are available but tend to be costly and time intensive. Bio-capture methods present a promising opportunity in greenhouse gas mitigation research. Recent developments in biotechnology for capturing greenhouse gases have demonstrated both effectiveness and long-term benefits. This review emphasizes the recent advancements in bio-capture techniques, showcasing them as dependable and economical solutions for carbon neutrality. The article briefly outlines various bio-capture methods and underscores their potential for industrial application. Moreover, it investigates into the challenges faced when integrating bio-capture with carbon capture and storage technology. The study concludes by exploring the recent trends and prospective enhancements in ecosystem revitalization and industrial decarbonization through green conversion techniques, reinforcing the path towards carbon neutrality.

Production of chemicals and utilities in-house improves the environmental sustainability of phytoplankton-based biorefinery

Life cycle assessment was used to evaluate the environmental impacts of phytoplanktonic biofuels as possible sustainable alternatives to fossil fuels. Three scenarios were examined for converting planktonic biomass into higher-value commodities and energy streams using the alga Scenedesmus sp. and the cyanobacterium Arthrospira sp. as the species of interest. The first scenario (Sc-1) involved the production of biodiesel and glycerol from the planktonic biomass. In the second scenario (Sc-2), biodiesel and glycerol were generated from the planktonic biomass, and biogas was produced from the residual biomass. The process also involved using a catalyst derived from snail shells for biodiesel production. The third scenario (Sc-3) was similar to Sc-2 but converted CO2 from the biogas upgrading to methanol, which was then used in synthesizing biodiesel. The results indicated that Sc-2 and Sc-3 had a reduced potential (up to 60 % less) for damaging human health compared to Sc-1. Sc-2 and Sc-3 had up to 61 % less environmental impact than Sc-1. Sc-2 and Sc-3 reduced the total cumulative exergy demand by up to 44 % compared to Sc-1. In conclusion, producing chemicals and utilities within the biorefinery could significantly improve environmental sustainability, reduce waste, and diversify revenue streams.

Nannochloris sp. Microalgae Strain for Treatment of Dairy Wastewaters

This paper focuses on a process for dairy wastewater treatment by mixotrophic cultivation of microalgae Nannochloris sp., using cheese whey obtained as a side flow from cheese production as an organic carbon source. The microalgae samples were prepared by adding to the standard growth medium increasing amounts of cheese whey, calculated to ensure a lactose concentration between 0 and 10 g/L. The samples were incubated at a constant temperature of 28 °C and 175 rpm stirring speed for a total time of seven days. Two LED (Light Emitting Diode) illumination schemes were applied in order to assess the effect of this parameter on microalgae development and bioactive compound accumulation: continuous illumination (light stress) versus alternative cycles of 12 h light-12 h dark (day-night cycle). The growth medium was analyzed before and after microalgae cultivation in order to determine the reduction of carbon, nitrogen, and phosphorus. The results obtained for this process, after a seven-day cultivation period, were as follows: reduction of 99-100% of lactose from the growth medium, up to 96% reduction in chemical oxygen demand, up to 91% reduction in nitrogen content, and up to 70% reduction in phosphorus content.

Light Stress after Heterotrophic Cultivation Enhances Lutein and Biofuel Production from a Novel Algal Strain Scenedesmus obliquus ABC-009

Scenedesmus obliquus ABC-009 is a microalgal strain that accumulates large amounts of lutein, particularly when subjected to growth-limiting conditions. Here, the performance of this strain was evaluated for the simultaneous production of lutein and biofuels under three different modes of cultivation - photoautotrophic mode using BG-11 medium with air or 2% CO₂ and heterotrophic mode using YM medium. While it was found that the highest fatty acid methyl ester (FAME) level and lutein content per biomass (%) were achieved in BG-11 medium with CO₂ and air, respectively, heterotrophic cultivation resulted in much higher biomass productivity. While the cell concentrations of the cultures grown under BG-11 and CO₂ were largely similar to those grown in YM medium, the disparity in the biomass yield was largely attributed to the larger cell volume in heterotrophically cultivated cells. Post-cultivation light treatment was found to further enhance the biomass productivity in all three cases and lutein content in heterotrophic conditions. Consequently, the maximum biomass (757.14 ± 20.20 mg/l/d), FAME (92.78 ± 0.08 mg/l/d), and lutein (1.006 ± 0.23 mg/l/d) productivities were obtained under heterotrophic cultivation. Next, large-scale lutein production using microalgae was demonstrated using a 1-ton open raceway pond cultivation system and a low-cost fertilizer (Eco-Sol). The overall biomass yields were similar in both media, while slightly higher lutein content was obtained using the fertilizer owing to the higher nitrogen content.

Co-culture of microalga Chlorella sorokiniana with syntrophic Streptomyces thermocarboxydus in cassava wastewater for wastewater treatment and biodiesel production

This study aimed to conduct a co-culture of a microalga and syntrophic actinomycetes to treat cassava a biogas effluent wastewater and enhance biodiesel production. Streptomyces thermocarboxydus strain BMI 10 produced the greatest effect on biomass production by Chlorella sorokiniana strain P21. Maximal algal biomass production and total lipid yield were increased when strain BMI 10 was co-cultured (by 21 and 25 %, respectively). Furthermore, the nutrient removal efficiency of P21 was not significantly different under sterilized and unsterilized conditions. Harvestability of the strain was also increased under both conditions. Analysis of the amount and composition of fatty acids from this co-culture biomass revealed that it was quite satisfactory for biodiesel production (54.11-61.52% saturated fatty acids with a 0.59-0.82 degree of unsaturation). Overall, the results showed the co-culture of the alga and bacterium is a holistic enhancement that couples wastewater treatment with biodiesel production.

Development of 2,3-Butanediol Production Process from Klebsiella aerogenes ATCC 29007 Using Extracted Sugars of Chlorella pyrenoidosa and Biodiesel-Derived Crude Glycerol

Expectation for renewable energy is increasing due to environmental pollution such as fossil fuel depletion, CO2 emission, and harmful gases. Therefore, in this study, extracted sugars of microalgae, which cause algal blooms and crude glycerol, a biodiesel industry byproduct, were used simultaneously to produce 2,3-BDO. The 2,3-BDO production using only extracted algal sugars was about 4.8 g/L at 18 h, and the production of 2,3-BDO using both extracted algal sugar and crude glycerol was about 7 g/L at 18 h. It was confirmed that the main culture with crude glycerol was increased 1.5-fold compared to the case of using only extracted algal sugars. In addition, four components of the main medium (ammonium sulfate, casein hydrolysate, yeast extract, and crude glycerol) were statistically optimized and the concentrations of the medium were 12, 16, 12, and 13 g/L, respectively. In addition, the final 2,3-BDO production was about 11g/L, which 1.6-fold higher than before the optimization process. As a result, it was confirmed that 2,3-BDO production is possible through the simultaneous use of algal sugars and crude glycerol, which can greatly contribute to the development of zero-waste processes.