Renewable Energy Sources in Transport on the Example of Methyl Esters and Bioethanol

Production Processes Related to Conventional and Renewable Energy in Enterprises and in the Circular Economy

In modern enterprises, all processes that are understood as structured activities intended for production, i [...]

Degree of Biomass Conversion in the Integrated Production of Bioethanol and Biogas

The integrated production of bioethanol and biogas makes it possible to optimise the production of carriers from renewable raw materials. The installation analysed in this experimental paper was a hybrid system, in which waste from the production of bioethanol was used in a biogas plant with a capacity of 1 MWe. The main objective of this study was to determine the energy potential of biomass used for the production of bioethanol and biogas. Based on the results obtained, the conversion rate of the biomass—maize, in this case—into bioethanol was determined as the efficiency of the process of bioethanol production. A biomass conversion study was conducted for 12 months, during which both maize grains and stillage were sampled once per quarter (QU-I, QU-II, QU-III, QU-IV; QU—quarter) for testing. Between 342 L (QU-II) and 370 L (QU-I) of ethanol was obtained from the organic matter subjected to alcoholic fermentation. The mass that did not undergo conversion to bioethanol ranged from 269.04 kg to 309.50 kg, which represented 32.07% to 36.95% of the organic matter that was subjected to the process of bioethanol production. On that basis, it was concluded that only two-thirds of the organic matter was converted into bioethanol. The remaining part—post-production waste in the form of stillage—became a valuable raw material for the production of biogas, containing one-third of the biodegradable fraction. Under laboratory conditions, between 30.5 m3 (QU-I) and 35.6 m3 (QU-II) of biogas per 1 Mg of FM (FM—fresh matter) was obtained, while under operating conditions, between 29.2 m3 (QU-I) and 33.2 m3 (QU-II) of biogas was acquired from 1 Mg of FM. The Biochemical Methane Potential Correction Coefficient (BMPCC), which was calculated based on the authors’ formula, ranged from 3.2% to 7.4% in the analysed biogas installation.

Problems of Selected Sectors of Biofuels for Transport in Poland

The paper discusses issues related to the sectors of biofuels for transport. Development directions of those sectors and factors limiting the growth rate thereof are analysed. At present, researchers’ attention is increasingly focused on development of the alternative fuels sector. Moreover, issues related to waste used in the sector of alternative fuels are now among the leading undertakings of environmental engineering. The authors have analysed the potential of biofuels sectors in Poland taking into account the EU’s legislative requirements. The paper contains a discussion of the sector of esters, liquid biofuels, sector of lignocellulose, sector of liquid bio-hydrocarbons and, additionally, pays attention to the sector of electromobility as one of the most attractive and prospective sectors in terms of emission reduction.

Significance and Directions of Energy Development in African Countries

The development of energy networks and electrification is a major challenge in many African countries, which can contribute to reducing social inequalities. Energy, and above all electricity, is a decisive factor influencing the functioning of national governments. The power of governments in individual countries depends on the energy sector. Therefore, it is worth noting that during the presidential elections, candidates make many promises related to the improvement of the energy supply. The article shows, using the examples of Guinea, Ethiopia and Egypt, how politicians in the pre-election period use slogans related to the energy and development of the country. The innovative side of this article looks at how politicians keep their promises by using the energy sector and how they secure victory in the next election. The article linked the objective needs for the development of the energy sector resulting from the growing demand for energy with the motives of the decisions makers who want to maintain power through the implementation of new investments in the energy sector. The paper presents the results of research on the development of the energy sector and the motives for this development, explains how energy investments are realized, and discusses the environmental and social problems that arise when building huge hydropower stations.

Innovative Processes in Managing an Enterprise from the Energy and Food Sector in the Era of Industry 4.0

The paper analyzes issues related to production processes in learning organizations using innovative solutions based on the Industry 4.0 paradigm. This study was realized by surveys and observation of companies operating in the energy and food sectors. These are sectors that in recent years have started to intensively implement innovative solutions and are undergoing a transformation towards an intelligent (digital) enterprise, which uses virtual reality, supported by effectively controlling the non-player characters (NPCs). The presented examples can be inspiration for chief executive officer (CEOs), chief operating officers (COOs), and chief information officers (CIOs), the people managing companies for investment in innovative solutions. The implementation of Industry 4.0 solutions, as well as new machines design according state-of-the-art achievements of mechanical engineering rules, will allow companies to implement new products, achieve better results (e.g., more products with lower production cost), increase operational efficiency (e.g., lower energy and water consumption), and meet environmental requirements (e.g., reduce CO2 emission, introduce zero-emission energy production).

Production of Electricity and Heat from Biomass Wastes Using a Converted Aircraft Turbine AI-20

The aim of this study was to investigate the influence of biomass micronization on energy production using a converted aircraft turbine AI-20. The test system was constructed in such a way to ensure continuous operation for a given period of time and was equipped in a chopper, a flail mill, and a micronizer. The turbine had the ability to produce energy from solid biomass and as well conventional fuels. The most energy was obtained from absolutely dry sunflower husk (17.27 MJ/kg) and the least from Poplar (7.82 MJ/kg). Miscanthus, wheat straw, and hay (approximately 17 MJ/kg) showed high values of energy production. In addition, the thermal decomposition of wheat straw at 350 and 450 °C was studied using the Py-GC/MS technique in a helium atmosphere to determine the gaseous compounds formed during biomass gasification under anaerobic conditions. The results obtained indicate the formation of compounds classified as phenols (vanillin, hydroxymethylfurfural).

Properties of Biocomposites from Rapeseed Meal, Fruit Pomace and Microcrystalline Cellulose Made by Press Pressing: Mechanical and Physicochemical Characteristics

This paper presents the results of research on biocomposites made of the mixture of post-extraction rapeseed meal, microcrystalline cellulose and various fruit pomace (chokeberry, blackcurrant, apple and raspberry pomace). The biocomposites were made in the process of mechanical thickening by means of a heated mould (die and stamp) which is located between two heating elements installed on a hydraulic press. The presented research combines mechanical engineering and material engineering issues. The physical and mechanical tests of obtained biocomposites included mechanical strength measurements, thermogravimetric analyses (TGA), colour change tests and scanning electron microscopic (SEM) tests of the internal structure after breaking the sample. In addition, Fourier transform infrared spectroscopy (FTIR) tests were carried out. Generally, the bend tests and Young's modulus were significantly increased, for example, biocomposites with an addition of chokeberry pomace had the flexural strength higher by approximately 25% in relation to the primary sample. Furthermore, it is interesting to note the increase of water contact angle of these biocomposites by 40% in relation to the primary sample. The research indicates the potential for using fruit pomace for the needs of biocomposite production.

Innovation strategy on the example of companies using bamboo

Innovations and new technologies allow companies to function, work, and develop in an ever-changing environment. The article discusses the importance of innovative strategies and presents the results of research carried out on the role of each employee group (CEO, R+D department, other workers) in implementing innovations, depending on the size of the enterprise: micro company, mini company, medium company, and large company. A look not only through the prism of the size of the organization, but also by the groups of people (knowledge group) responsible for innovation is a novelty of the research and fills the gap in research on innovation of enterprises. Moreover, as an exemplification of theory which is used in practice, the article also presents innovations related to bamboo use in many enterprises from different sectors of the economy (energy, automobile, and textile). Bamboo, thanks to its mechanical and chemical properties, can become an innovative material widely used by various companies. Innovations based on the use of bamboo become eco-innovations that support eco-efficiency and the circular economy. The cognitive and utilitarian value of completed research lies in the possibility of a broad look at the innovation strategy (including bamboo as an innovative material) and in the possibility of its implementation and application in various enterprises operating on the market.