Efficient biotransformation of biobased raw materials into novel polyesters/polyesteramides; comparative investigation of enzymatic synthesis of block and random copolymers and terpolymers

Within the context of paving the way for a sustainable bioeconomy, there is a strong emphasis on utilizing bio-based raw materials as substitutes for fossil fuels in the production of polymers. When designing the synthesis of novel polymeric materials from bio-based building blocks, a promising green approach consists in utilizing enzymes as biocatalysts. This aspect is particularly important when aiming to obtain products from the class of polyesters and polyesteramides with biocompatible and biodegradable properties, as enzymes facilitate the synthesis of polymers that align closely with biological systems. Lipases have been proven to be very effective in the synthesis of polymers, particularly in the ring-opening polymerization of ε-caprolactone. Considering the possibility of performing the copolymerization of ε-caprolactone for obtaining random and block structures, this is the first comparative study of the enzymatic polymer synthesis utilizing an innovative approach of combining ring-opening polymerization with polycondensation. Terpolymers derived from ε-caprolactone and dimethyl itaconate or dimethyl adipate with either 1,8-octanediol or 1,8-octanediamine were obtained at 85 °C in a solventless systems, yielding products with a copolymer content of >85 % and weight-average molecular weight (Mw) up to 40,000 Da. The thermal properties and biodegradation behavior of the synthetized terpolymers were assessed.

Lignin Upconversion by Functionalization and Network Formation

Lignin, a complex and abundant biopolymer derived from plant cell walls, has emerged as a promising feedstock for sustainable material development. Due to the high abundance of phenylpropanoid units, aromatic rings, and hydroxyl groups, lignin is an ideal candidate for being explored in various material applications. Therefore, the demand on lignin valorization for development of value-added products is significantly increasing. This mini-review provides an overview of lignin upconversion, focusing on its functionalization through chemical and enzymatic routes, and its application in lignin-based polymer resins, hydrogels, and nanomaterials. The functionalization of lignin molecules with various chemical groups offers tailored properties and increased compatibility with other materials, expanding its potential applications. Additionally, the formation of lignin-based networks, either through cross-linking or blending with polymers, generates novel materials with improved mechanical, thermal, and barrier properties. However, challenges remain in optimizing functionalization techniques, preserving the innate complexity of lignin, and achieving scalability for industrial implementation. As lignin's potential continues to be unlocked, it is poised to contribute significantly to the shift towards more eco-friendly and resource-efficient industries.

The effects of the chemical modification on immobilized lipase features are affected by the enzyme crowding in the support

In this article, we have analyzed the interactions between enzyme crowding on a given support and its chemical modification (ethylenediamine modification via the carbodiimide route and picryl sulfonic (TNBS) modification of the primary amino groups) on the enzyme activity and stability. Lipase from Thermomyces lanuginosus (TLL) and lipase B from Candida antarctica (CALB) were immobilized on octyl-agarose beads at two very different enzyme loadings, one of them exceeding the capacity of the support, one well under this capacity. Chemical modifications of the highly loaded and lowly loaded biocatalysts gave very different results in terms of activity and stability, which could increase or decrease enzyme activity depending on the enzyme support loading. For example, both lowly loaded biocatalysts increased their activity after modification while the effect was the opposite for the highly loaded biocatalysts. Additionally, the modification with TNBS of highly loaded CALB biocatalyst increased its stability while decrease the activity.

Exploiting Enzyme in the Polymer Synthesis for a Remarkable Increase in Thermal Conductivity

The interest in polymers with high thermal conductivity increased much because of their inherent properties such as low density, low cost, flexibility, and good chemical resistance. However, it is challenging to engineer plastics with good heat transfer characteristics, processability, and required strength. Improving the degree of the chain alignment and forming a continuous thermal conduction network is expected to enhance thermal conductivity. This research aimed to develop polymers with a high thermal conductivity that can be interesting for several applications. Two polymers, namely poly(benzofuran-co-arylacetic acid) and poly(tartronic-co-glycolic acid), with high thermal conductivity containing microscopically ordered structures were prepared by performing enzyme-catalyzed (Novozyme-435) polymerization of the corresponding α-hydroxy acids 4-hydroxymandelic acid and tartronic acid, respectively. A comparison between the polymer's structure and heat transfer obtained by mere thermal polymerization before and enzyme-catalyzed polymerization will now be discussed, revealing a dramatic increase in thermal conductivity in the latter case. The polymer structures were investigated by FTIR spectroscopy, nuclear magnetic resonance (NMR) spectroscopy in liquid- and solid-state (ss-NMR), and powder X-ray diffraction. The thermal conductivity and diffusivity were measured using the transient plane source technique.

Co-Entrapment of Sorafenib and Cisplatin Drugs and iRGD Tumour Homing Peptide by Poly[ε-caprolactone-co-(12-hydroxystearate)] Copolymer

The drug-loaded nanocarriers have overcome various challenges compared with the pure chemotherapeutic drug, such as limited bioavailability, multiple drug resistance, poor patient compliance, and adverse drug reactions, offering advantages such as protection from degradation in the blood stream, better drug solubility, and improved drug stability. One promising group of controlled and targeted drug delivery systems is polymer-based nanoparticles that can sustain the release of the active agent by diffusion and their degradation. Sorafenib is the only drug that can prolong the life of patients suffering from hepatocellular carcinoma. Cisplatin remains one of the most widely used broad-spectrum anticancer drugs for the treatment of a variety of solid tumours. Nanoformulations can exert a synergistic effect by entrapping two drugs with different modes of action, such as sorafenib and cisplatin. In our study, polymeric nanoparticles were prepared with a good production yield by an improved double emulsion solvent evaporation method using the copolymer of 12-hydroxystearic acid with ε-caprolactone (12CL), a biocatalytically synthesised biocompatible and biodegradable carrier, for the co-entrapment of sorafenib and cisplatin in nanotherapeutics. A bovine serum albumin (BSA) model compound was used to increase the cisplatin incorporation; then, it was successfully substituted by a iRGD tumour penetrating peptide that might provide a targeting function of the nanoparticles.

Ferulic Acid as Building Block for the Lipase-Catalyzed Synthesis of Biobased Aromatic Polyesters

Enzymatic synthesis of aromatic biobased polyesters is a recent and rapidly expanding research field. However, the direct lipase-catalyzed synthesis of polyesters from ferulic acid has not yet been reported. In this work, various ferulic-based monomers were considered for their capability to undergo CALB-catalyzed polymerization. After conversion into diesters of different lengths, the CALB-catalyzed polymerization of these monomers with 1,4-butanediol resulted in short oligomers with a DP_n up to 5. Hydrogenation of the double bond resulted in monomers allowing obtaining polyesters of higher molar masses with DP_n up to 58 and M_w up to 33,100 g·mol⁻¹. These polyesters presented good thermal resistance up to 350 °C and T_g up to 7 °C. Reduction of the ferulic-based diesters into diols allowed preserving the double bond and synthesizing polyesters with a DP_n up to 19 and M_w up to 15,500 g·mol⁻¹ and higher T_g (up to 21 °C). Thus, this study has shown that the monomer hydrogenation strategy proved to be the most promising route to achieve ferulic-based polyester chains of high DP_n. This study also demonstrates for the first time that ferulic-based diols allow the synthesis of high T_g polyesters. Therefore, this is an important first step toward the synthesis of competitive biobased aromatic polyesters by enzymatic catalysis.

Efficient Production of 3′-Sialyllactose by Single Whole-Cell in One-Pot Biosynthesis

Sialyllactose (SL) is one of the most important acidic oligosaccharides in human milk, which plays an important role in the health of infants. In this work, an efficient multi-enzyme cascade was developed in a single whole cell to produce 3′-SL. We constructed two compatible plasmids with double cloning sites to co-express four genes. Different combinations were assessed to verify the optimal catalytic ability. Then, the conversion temperature, pH, and stability under the optimal temperature and pH were investigated. Moreover, the optimal conversion conditions and surfactant concentration were determined. By using the optimal conditions (35 °C, pH 7.0, 20 mM polyphosphate, 10 mM cytidine monophosphate (CMP), 20 mM MgCl2), 25 mL and 4 L conversion systems were carried out to produce 3′-SL. Similar results were obtained between different volume conversion reactions, which led the maximum production of 3′-SL to reach 53 mM from 54.2 mM of sialic acid (SA) in the 25 mL system and 52.8 mM of 3′-SL from 53.8 mM of SA in the 4 L system. These encouraging results demonstrate that the developed single whole-cell multi-enzyme system exhibits great potential and economic competitiveness for the manufacture of 3′-SL.

Prospects of Using Biocatalysis for the Synthesis and Modification of Polymers

Trends in the dynamically developing application of biocatalysis for the synthesis and modification of polymers over the past 5 years are considered, with an emphasis on the production of biodegradable, biocompatible and functional polymeric materials oriented to medical applications. The possibilities of using enzymes not only as catalysts for polymerization but also for the preparation of monomers for polymerization or oligomers for block copolymerization are considered. Special attention is paid to the prospects and existing limitations of biocatalytic production of new synthetic biopolymers based on natural compounds and monomers from biomass, which can lead to a huge variety of functional biomaterials. The existing experience and perspectives for the integration of bio- and chemocatalysis in this area are discussed.