Degradation of Landfill Leachate Using UV-TiO2 Photocatalysis Combination with Aged Waste Reactors

Treatment of landfill leachate using photocatalytic based advanced oxidation process - a critical review

Landfill leachate is a discrete volumetric component of municipal solid waste; hence, researchers and professionals are more concerned about it because of its obscurity. Innovative treatment and emerging technologies are being scrutinized to address the treatment of landfill leachate challenges. The leading target of this review was to examine the possibility of removing recalcitrant organic pollutants from landfill leachate by photocatalytic-based advanced oxidation processes. A summary of the systematic applicability of conventional treatment for landfill leachate is provided, with a focus on physico-chemical and biological processes. The biological treatment, such as aerobic and anaerobic digestion, is an excellent technique for treating highly concentrated organic pollutants in the wastewater. However, Leachate can scarcely be treated using conventional techniques since it is enriched with refractory organics and inorganic ions. It is clear from the literature review that none of the available combinations of physico-chemical and biological treatments are entirely relevant for the removal of recalcitrant organic pollutants from leachate. Recently, the photo-assisted TiO2/ZnO oxidation has shown an excessively potential and feasible way to treat landfill leachate. TiO2/ZnO photocatalysis is currently developing to treat recalcitrant organic pollutants from landfill leachate. The effect of operating parameters reveals that pH and temperature affect the reaction rate. The addition of oxidant H2O2 to the TiO2/ZnO suspension suggests that TiO2 leads to an increase in the rate of reaction when compared to ZnO. Photocatalytic remediation technique of landfill leachate would support the goal of environmental sustainability by greatly enhancing the effectiveness of treated leachate reutilization. In this review, the selection of the best photocatalytic treatment for leachate based on its systematic relevance and potential conditions, characteristics, cost-effectiveness, essential controlling, discharge limit, long-term environmental effects, and its future study perspectives are emphasized and discussed.

Innovative Materials and Processes for Removal of Biopersistent Pollutants

The aim of this Special Issue “Innovative Materials and Processes for Removal of Biopersistent Pollutants” (https://www [...]

A Recent Progress in the Leachate Pretreatment Methods Coupled with Anaerobic Digestion for Enhanced Biogas Production: Feasibility, Trends, and Techno-Economic Evaluation

Landfill leachate (LFL) treatment is a severe challenge due to its highly viscous nature and various complex pollutants. Leachate comprises various toxic pollutants, including inorganic macro/nano components, xenobiotics, dissolved organic matter, heavy metals, and microorganisms responsible for severe environmental pollution. Various treatment procedures are available to achieve better effluent quality levels; however, most of these treatments are nondestructive, so pollutants are merely transported from one phase to another, resulting in secondary contamination. Anaerobic digestion is a promising bioconversion technology for treating leachate while producing renewable, cleaner energy. Because of its high toxicity and low biodegradability, biological approaches necessitate employing other techniques to complement and support the primary process. In this regard, pretreatment technologies have recently attracted researchers' interest in addressing leachate treatment concerns through anaerobic digestion. This review summarizes various LFL pretreatment methods, such as electrochemical, ultrasonic, alkaline, coagulation, nanofiltration, air stripping, adsorption, and photocatalysis, before the anaerobic digestion of leachate. The pretreatment could assist in converting biogas (carbon dioxide to methane) and residual volatile fatty acids to valuable chemicals and fuels and even straight to power generation. However, the selection of pretreatment is a vital step. The techno-economic analysis also suggested the high economic feasibility of integrated-anaerobic digestion. Therefore, with the incorporation of pretreatment and anaerobic digestion, the process could have high economic viability attributed to bioenergy production and cost savings through sustainable leachate management options.

Leachate decontamination through biological processes coupled to advanced oxidation: A review

The landfill leachate is considered a toxic effluent composed of recalcitrant contaminants that requires innovative alternatives for its decontamination. Coupling between advanced oxidation processes (AOPs) and aerobic biological treatments are highlighted in this research. Therefore, a bibliographic review of the research made from 2010 to 2021 was developed. These combined alternatives were applied in leachates, and it is oriented toward the analysis of knowledge gaps, trends, and future proposals of the treatment combined that contribute to researchers who wish to work on the subject. These kinds of treatments were chosen due to a bibliometric analysis made. Also, the information was searched in several scientific database. This work was found to be unpublished, as no reviews were found so far that agglomerate studies of coupling between photocatalytic and aerobic biological processes to treat leachates. Besides, AOPs are ideal for treating wastewater of complex composition, however, when it is used as the only treatment, they are usually unprofitable, which justifies their coupling with biological treatments. Subsequently, it was determined that the knowledge main gap is the lack of documentation of treatment costs, which makes it difficult to implement on a real scale. In addition to this, the couplings trends are toward doping with metallic and nonmetallic ions of the catalyst used in the photocatalytic process to improve the efficiency of these. Finally, future research should work on finding alternatives that allow the optimization of the resources used in the combined systems and on promoting the recovery of existing products in the leachate.Implications: Leachates generate several environmental impacts due to their toxic composition. Even when coupling between heterogeneous photocatalysis and biologic treatment can solve them, issues like cost analysis and the scaling-up factor have not been developed, and futures researchers should work on that. Besides, the trend founded in almost all investigations was the catalyst doping with metals and nonmetals ions, particularly when they use TiO2 because it gives the possibility of improving efficiencies just with a structural variation. Finally, these treatment combinations require more analyses and comparison of their remotion over emerging pollutants and their performance with new designs.

Construction of Photoelectrochemical DNA Biosensors Based on TiO2@Carbon Dots@Black Phosphorous Quantum Dots

In this work, carbon dots (CDs) and black phosphorus quantum dots (BPQDs) were used to decorate titanium dioxide to enhance the photoelectrochemical (PEC) properties of the nanocomposites (TiO₂@CDs@BPQDs), and the modified nanocomposites were used to sensitively detect DNA. We used the hydrothermal method and citric acid as a raw material to prepare CDs with good dispersion and strong fluorescence properties. BPQDs with a uniform particle size were prepared from black phosphorus crystals. The nanocomposites were characterized by fluorescence spectroscopy, UV-Vis absorption spectroscopy, Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). The preparation method of the working electrode was explored, the detection conditions were optimized, and the sensitive detection of target DNA was achieved. The results demonstrate that CDs and BPQDs with good optical properties were successfully prepared, and they were successfully combined with TiO₂ to improve the PEC performance of TiO₂@CDs@BPQDs. The TiO₂-based PEC DNA detection method was constructed with a detection limit of 8.39 nM. The constructed detection method has many advantages, including good sensitivity, a wide detection range, and good specificity. This work provides a promising PEC strategy for the detection of other biomolecules.

Photocatalysis for Heavy Metal Treatment: A Review

Environmental and human health are threatened by anthropogenic heavy metal discharge into watersheds. Traditional processes have many limitations, such as low efficiency, high cost, and by-products. Photocatalysis, an emerging advanced catalytic oxidation technology, uses light energy as the only source of energy. It is a clean new technology that can be widely used in the treatment of organic pollutants in water. Given the excellent adaptability of photocatalysis in environmental remediation, it can be used for the treatment of heavy metals. In this comprehensive review, the existing reported works in relevant areas are summarized and discussed. Moreover, recommendations for future work are provided.