Neuromorphic sequence learning with an event camera on routes through vegetation

For many robotics applications, it is desirable to have relatively low-power and efficient onboard solutions. We took inspiration from insects, such as ants, that are capable of learning and following routes in complex natural environments using relatively constrained sensory and neural systems. Such capabilities are particularly relevant to applications such as agricultural robotics, where visual navigation through dense vegetation remains a challenging task. In this scenario, a route is likely to have high self-similarity and be subject to changing lighting conditions and motion over uneven terrain, and the effects of wind on leaves increase the variability of the input. We used a bioinspired event camera on a terrestrial robot to collect visual sequences along routes in natural outdoor environments and applied a neural algorithm for spatiotemporal memory that is closely based on a known neural circuit in the insect brain. We show that this method is plausible to support route recognition for visual navigation and more robust than SeqSLAM when evaluated on repeated runs on the same route or routes with small lateral offsets. By encoding memory in a spiking neural network running on a neuromorphic computer, our model can evaluate visual familiarity in real time from event camera footage.

Robust Scan Registration for Navigation in Forest Environment Using Low-Resolution LiDAR Sensors

Automated forest machines are becoming important due to human operators' complex and dangerous working conditions, leading to a labor shortage. This study proposes a new method for robust SLAM and tree mapping using low-resolution LiDAR sensors in forestry conditions. Our method relies on tree detection to perform scan registration and pose correction using only low-resolution LiDAR sensors (16Ch, 32Ch) or narrow field of view Solid State LiDARs without additional sensory modalities like GPS or IMU. We evaluate our approach on three datasets, including two private and one public dataset, and demonstrate improved navigation accuracy, scan registration, tree localization, and tree diameter estimation compared to current approaches in forestry machine automation. Our results show that the proposed method yields robust scan registration using detected trees, outperforming generalized feature-based registration algorithms like Fast Point Feature Histogram, with an above 3 m reduction in RMSE for the 16Chanel LiDAR sensor. For Solid-State LiDAR the algorithm achieves a similar RMSE of 3.7 m. Additionally, our adaptive pre-processing and heuristic approach to tree detection increased the number of detected trees by 13% compared to the current approach of using fixed radius search parameters for pre-processing. Our automated tree trunk diameter estimation method yields a mean absolute error of 4.3 cm (RSME = 6.5 cm) for the local map and complete trajectory maps.

Design and Evaluation of Capacitive Smart Transducer for a Forestry Crane Gripper

Stable grasps are essential for robots handling objects. This is especially true for "robotized" large industrial machines as heavy and bulky objects that are unintentionally dropped by the machine can lead to substantial damages and pose a significant safety risk. Consequently, adding a proximity and tactile sensing to such large industrial machinery can help to mitigate this problem. In this paper, we present a sensing system for proximity/tactile sensing in gripper claws of a forestry crane. In order to avoid difficulties with respect to the installation of cables (in particular in retrofitting of existing machinery), the sensors are truly wireless and can be powered using energy harvesting, leading to autarkic, i.e., self-contained, sensors. The sensing elements are connected to a measurement system which transmits the measurement data to the crane automation computer via Bluetooth low energy (BLE) compliant to IEEE 1451.0 (TEDs) specification for eased logical system integration. We demonstrate that the sensor system can be fully integrated in the grasper and that it can withstand the challenging environmental conditions. We present experimental evaluation of detection in various grasping scenarios such as grasping at an angle, corner grasping, improper closure of the gripper and proper grasp for logs of three different sizes. Results indicate the ability to detect and differentiate between good and poor grasping configurations.

Performance Investigation and Repeatability Assessment of a Mobile Robotic System for 3D Mapping

In this paper, we present a quantitative performance investigation and repeatability assessment of a mobile robotic system for 3D mapping. With the aim of a more efficient and automatic data acquisition process with respect to well-established manual topographic operations, a 3D laser scanner coupled with an inertial measurement unit is installed on a mobile platform and used to perform a high-resolution mapping of the surrounding environment. Point clouds obtained with the use of a mobile robot are compared with those acquired with the device carried manually as well as with a terrestrial laser scanner survey that serves as a ground truth. Experimental results show that both mapping modes provide similar accuracy and repeatability, whereas the robotic system compares favorably with respect to the handheld modality in terms of noise level and point distribution. The outcomes demonstrate the feasibility of the mobile robotic platform as a promising technology for automatic and accurate 3D mapping.

Localization and Mapping on Agriculture Based on Point-Feature Extraction and Semiplanes Segmentation From 3D LiDAR Data

Developing ground robots for agriculture is a demanding task. Robots should be capable of performing tasks like spraying, harvesting, or monitoring. However, the absence of structure in the agricultural scenes challenges the implementation of localization and mapping algorithms. Thus, the research and development of localization techniques are essential to boost agricultural robotics. To address this issue, we propose an algorithm called VineSLAM suitable for localization and mapping in agriculture. This approach uses both point- and semiplane-features extracted from 3D LiDAR data to map the environment and localize the robot using a novel Particle Filter that considers both feature modalities. The numeric stability of the algorithm was tested using simulated data. The proposed methodology proved to be suitable to localize a robot using only three orthogonal semiplanes. Moreover, the entire VineSLAM pipeline was compared against a state-of-the-art approach considering three real-world experiments in a woody-crop vineyard. Results show that our approach can localize the robot with precision even in long and symmetric vineyard corridors outperforming the state-of-the-art algorithm in this context.

Rapid Static Positioning Using a Four System GNSS Receivers in the Forest Environment

Global Navigation Satellite Systems (GNSS) are crucial elements used in forest inventories. Forest metrics modeling efficacy depends on the accuracy of determining sample plot locations by GNSS. As of 2021, the GNSS consists of 120 active satellites, ostensibly improving position acquisition in forest conditions. The main idea of this article was to evaluate GIS-class and geodetic class GNSS receivers on 33 control points located in the forest. The main assumptions were operating on four GNSS systems (GPS, GLONASS, Galileo, and BeiDou), keeping a continuous online connection to the network of reference stations, maintaining occupation time-limited to 60 epochs, and repeating all the measurements three times. Rapid static positioning was tested, as it compares the true performance of the four GNSS systems receivers. Statistical differences between the receivers were confirmed. The GIS-class receiver achieved an accuracy of 1.38 m and a precision of 1.29 m, while the geodetic class receiver reached 0.74 m and 0.91 m respectively. Even though the research was conducted under the same data capture conditions, the large variability of positioning results were found to be caused by cycle slips and the multipath effect.

Model Predictive Control-Based Integrated Path Tracking and Velocity Control for Autonomous Vehicle with Four-Wheel Independent Steering and Driving

This paper presents an MPC-based integrated control algorithm for an autonomous vehicle equipped with four-wheel independent steering and driving systems. The objective of this research is to improve the performance of the path and velocity tracking controllers by distributing the control effort to the multiple actuators. The proposed algorithm has two modules: reference state decision and MPC-based vehicle motion controller. Reference state decision module determines reference state profiles consisting of yaw rate and velocity in order to overcome the limitation of the error dynamics-based path tracking controller, which requires several assumptions on the reference path. The MPC-based vehicle motion controller is designed with a linear time-varying vehicle model in order to optimally allocate the control effort to each actuator. A linear time-varying MPC is adopted to reduce computational burden caused by using a non-linear one. The effectiveness of the proposed algorithm is validated via simulation on MATLAB/Simulink and CarSim. The simulation results show that the proposed algorithm improves the reference tracking performance by effectively distributing the control effort to the steering angle and driving force of each actuator.

Obstacle Detection System for Agricultural Mobile Robot Application Using RGB-D Cameras

Mobile robots designed for agricultural tasks need to deal with challenging outdoor unstructured environments that usually have dynamic and static obstacles. This assumption significantly limits the number of mapping, path planning, and navigation algorithms to be used in this application. As a representative case, the autonomous lawn mowing robot considered in this work is required to determine the working area and to detect obstacles simultaneously, which is a key feature for its working efficiency and safety. In this context, RGB-D cameras are the optimal solution, providing a scene image including depth data with a compromise between precision and sensor cost. For this reason, the obstacle detection effectiveness and precision depend significantly on the sensors used, and the information processing approach has an impact on the avoidance performance. The study presented in this work aims to determine the obstacle mapping accuracy considering both hardware- and information processing-related uncertainties. The proposed evaluation is based on artificial and real data to compute the accuracy-related performance metrics. The results show that the proposed image and depth data processing pipeline introduces an additional distortion of 38 cm.

Advances in Forest Robotics: A State-of-the-Art Survey

The development of robotic systems to operate in forest environments is of great relevance for the public and private sectors. In this sense, this article reviews several scientific papers, research projects and commercial products related to robotic applications for environmental preservation, monitoring, wildfire firefighting, inventory operations, planting, pruning and harvesting. After conducting critical analysis, the main characteristics observed were: (a) the locomotion system is directly affected by the type of environmental monitoring to be performed; (b) different reasons for pruning result in different locomotion and cutting systems; (c) each type of forest, in each season and each type of soil can directly interfere with the navigation technique used; and (d) the integration of the concept of swarm of robots with robots of different types of locomotion systems (land, air or sea) can compensate for the time of executing tasks in unstructured environments. Two major areas are proposed for future research works: Internet of Things (IoT)-based smart forest and navigation systems. It is expected that, with the various characteristics exposed in this paper, the current robotic forest systems will be improved, so that forest exploitation becomes more efficient and sustainable.

Advances in Agriculture Robotics: A State-of-the-Art Review and Challenges Ahead

The constant advances in agricultural robotics aim to overcome the challenges imposed by population growth, accelerated urbanization, high competitiveness of high-quality products, environmental preservation and a lack of qualified labor. In this sense, this review paper surveys the main existing applications of agricultural robotic systems for the execution of land preparation before planting, sowing, planting, plant treatment, harvesting, yield estimation and phenotyping. In general, all robots were evaluated according to the following criteria: its locomotion system, what is the final application, if it has sensors, robotic arm and/or computer vision algorithm, what is its development stage and which country and continent they belong. After evaluating all similar characteristics, to expose the research trends, common pitfalls and the characteristics that hinder commercial development, and discover which countries are investing into Research and Development (R&D) in these technologies for the future, four major areas that need future research work for enhancing the state of the art in smart agriculture were highlighted: locomotion systems, sensors, computer vision algorithms and communication technologies. The results of this research suggest that the investment in agricultural robotic systems allows to achieve short—harvest monitoring—and long-term objectives—yield estimation.

A Survey on Robotic Technologies for Forest Firefighting: Applying Drone Swarms to Improve Firefighters’ Efficiency and Safety

Forest firefighting missions encompass multiple tasks related to prevention, surveillance, and extinguishing. This work presents a complete survey of firefighters on the current problems in their work and the potential technological solutions. Additionally, it reviews the efforts performed by the academy and industry to apply different types of robots in the context of firefighting missions. Finally, all this information is used to propose a concept of operation for the comprehensive application of drone swarms in firefighting. The proposed system is a fleet of quadcopters that individually are only able to visit waypoints and use payloads, but collectively can perform tasks of surveillance, mapping, monitoring, etc. Three operator roles are defined, each one with different access to information and functions in the mission: mission commander, team leaders, and team members. These operators take advantage of virtual and augmented reality interfaces to intuitively get the information of the scenario and, in the case of the mission commander, control the drone swarm.