Estimating the Aboveground Biomass for Planted Forests Based on Stand Age and Environmental Variables

Capturing woody aboveground biomass historical change and potential under climate change using Landsat time-series for afforestation in dryland of China

Capturing long-term dynamics and the potential under climate change of woody aboveground biomass (AGB) is imperative for calculating and raising carbon sequestration of afforestation in dryland. It is always been a great challenge to accurately capture AGB dynamics of sparse woody vegetation mixed with grassland using only Landsat time-series, resulting in changing trajectory of woody AGB estimates cannot accurately reflect woody vegetation growth regularity in dryland. In this study, surface reflectance (SR) sensitive to woody AGB was firstly selected and interannual time-series of composited SR was smoothed using S-G filter for each pixel, and then optimal machine learning algorithm was selected to estimate woody AGB time-series. Pixels that have reached AGB potential were detected based on the AGB changing trajectory, and the potential was spatial-temporal extended using random forest model combining environmental variables under current climate condition and CMIP6 climate models. Results show that: 1) minimum value composite based on NIRv during Jul.-Sep. is more capable of explaining woody AGB variation in dryland (R = 0.87, p < 0.01), and Random Forest (RF) model has the best performance in estimating woody AGB (R2 = 0.75, RMSE = 4.74 t·ha-1) among sis commonly used machine learning models. 2) Annual woody AGB estimates can be perfectly fitted with a logistic growth curve (R2 = 0.97, p < 0.001) indicating explicit growth regularity of woody vegetation, which provides physiological foundation for determining woody AGB potential. 3) Woody AGB potential can be accurately simulated by RF combining environmental variables (R2 = 0.95, RMSE = 2.89 t·ha-1), and current woody AGB still has a potential of small increase, whereas the overall losses of woody AGB potential were observed in 2030, 2040 and 2050 under CMIP6 SSP-RCP scenarios.

Growth characteristics of Cunninghamia lanceolata in China

Chinese fir (Cunninghamia lanceolata) is one of southern China's most important native tree species, which has experienced noticeable climate-induced changes. Published papers (1978-2020) on tree growth of Chinese fir forests in China were collected and critically reviewed. After that, a comprehensive growth data set was developed from 482 sites, which are distributed between 102.19° and 130.07°E in longitude, between 21.87° and 37.24°N in latitude and between 5 and 2260 m in altitude. The dataset consists of 2265 entries, including mean DBH (cm), mean H (m), volume (m³), biomass (dry weight) (kg) (stem (over bark) biomass, branches biomass, leaves biomass, bark biomass, aboveground biomass, roots biomass, total trees biomass) and related information, i.e. geographical location (Country, province, study site, longitude, latitude, altitude, slope, and aspect), climate (mean annual precipitation-MAP and mean annual temperature-MAT), stand description (origin, age, canopy density and stand density), and sample regime (plot size, number and investigation year). Our results showed that (1) the best prediction of height was obtained using nonlinear composite model Height = [Formula: see text], (R² = 0.8715, p < 0.05), (2) the equation Volume = DBH²/(387.8 + 19,190/Height) (R² = 0.9833, p < 0.05) was observed to be the most suitable model for volume estimation. Meanwhile, when the measurements of the variables are difficult to carry out, the volume model Volume = 0.03957 - 0.01215*DBH + 0.00118*DBH² (R² = 0.9573, p < 0.05) is determined from DBH only has a practical advantage, (3) the regression equations of component biomass against DBH explained more significant than 86% variability in almost all biomass data of woody tissues, which were ranked as total trees (97.25%) > aboveground (96.55%) > stems (with bark) (96.17%) > barks (88.95%) > roots (86.71%), and explained greater than 64% variability in branch biomass. The foliage biomass equation was the poorest among biomass components (R² = 0.6122). The estimation equations derived in this study are particularly suitable for the Chinese fir forests in China. This dataset can provide a theoretical basis for predicting and assessing the potential of carbon sequestration and afforestation activities of Chinese fir forests on a national scale.

Measuring plant biomass remotely using drones in arid landscapes

Measurement of variation in plant biomass is essential for answering many ecological and evolutionary questions. Quantitative estimates require plant destruction for laboratory analyses, while field studies use allometric approaches based on simple measurement of plant dimensions.

We estimated the biomass of individual shrub‐sized plants, using a low‐cost unmanned aerial system (drone), enabling rapid data collection and non‐destructive sampling. We compared volume measurement (a surrogate for biomass) and sampling time, from the simple dimension measurements and drone, to accurate laboratory‐derived biomass weights. We focused on three Australian plant species which are ecologically important to their terrestrial and floodplain ecosystems: porcupine grass Triodia scariosa, Queensland bluebush Chenopodium auricomum, and lignum Duma florulenta.

Estimated volume from the drone was more accurate than simple dimension measurements for porcupine grass and Queensland bluebush, compared to estimates from laboratory analyses but, not for lignum. The latter had a sparse canopy, with thin branches, few vestigial leaves and a similar color to the ground. Data collection and analysis consistently required more time for the drone method than the simple dimension measurements, but this would improve with automation.

The drone method promises considerable potential for some plant species, allowing data to be collected over large spatial scales and, in time series, increasing opportunities to answer complex ecological and evolutionary questions and monitor the state of ecosystems and plant populations.

Improving Estimation of Woody Aboveground Biomass of Sparse Mixed Forest over Dryland Ecosystem by Combining Landsat-8, GaoFen-2, and UAV Imagery

Sparse mixed forest with trees, shrubs, and green herbaceous vegetation is a typical landscape in the afforestation areas in northwestern China. It is a great challenge to accurately estimate the woody aboveground biomass (AGB) of a sparse mixed forest with heterogeneous woody vegetation types and background types. In this study, a novel woody AGB estimation methodology (VI-AGB model stratified based on herbaceous vegetation coverage) using a combination of Landsat-8, GaoFen-2, and unmanned aerial vehicle (UAV) images was developed. The results show the following: (1) the woody and herbaceous canopy can be accurately identified using the object-based support vector machine (SVM) classification method based on UAV red-green-blue (RGB) images, with an average overall accuracy and kappa coefficient of 93.44% and 0.91, respectively; (2) compared with the estimation uncertainties of the woody coverage-AGB models without considering the woody vegetation types (RMSE = 14.98 t∙ha−1 and rRMSE = 96.31%), the woody coverage-AGB models stratified based on five woody species (RMSE = 5.82 t∙ha−1 and rRMSE = 37.46%) were 61.1% lower; (3) of the six VIs used in this study, the near-infrared reflectance of pure vegetation (NIRv)-AGB model performed best (RMSE = 7.91 t∙ha−1 and rRMSE = 50.89%), but its performance was still seriously affected by the heterogeneity of the green herbaceous coverage. The normalized difference moisture index (NDMI)-AGB model was the least sensitive to the background. The stratification-based VI-AGB models considering the herbaceous vegetation coverage derived from GaoFen-2 and UAV images can significantly improve the accuracy of the woody AGB estimated using only Landsat VIs, with the RMSE and rRMSE of 6.6 t∙ha−1 and 42.43% for the stratification-based NIRv-AGB models. High spatial resolution information derived from UAV and satellite images has a great potential for improving the woody AGB estimated using only Landsat images in sparsely vegetated areas. This study presents a practical method of estimating woody AGB in sparse mixed forest in dryland areas.

Heavy metal accumulation of urban Scots pine (Pinus sylvestris L.) plantation

In soil and plant tissues, the concentrations and reserves of manganese (Mn), zinc (Zn), nickel (Ni), copper (Cu), and lead (Pb) were calculated to measure the heavy metal quantities of the Scots pine afforestation. In the soil and plant tissues, heavy metal concentrations varied. The highest concentration of heavy metal was found in Mn and the lowest concentration in Pb in the soil. Heavy metal stocks followed the order of Mn > Zn > Ni > Cu > Pb in soil, and the order of Zn > Cu > Mn > Ni > Pb in the plant. In the Scots pine parts, Pb and Zn concentrations and BCFs follow Needle > Branch > Bark > Root > Trunk order, while Cu concentrations follow Root > Needle > Branch > Bark > Trunk order, Mn concentrations follow Needle > Branch > Bark > Trunk > Root order and Ni concentrations follow Needle > Branch > Root > Bark > Trunk order. In particular, Scots pine needles are considered to be ideal to be used as biomonitoring plants, especially in monitoring increases in heavy metal concentrations in urban areas. Besides, in order to be more effective in the retaining of heavy metals, it is proposed that mixtures of hyperaccumulator plants be added which are appropriate for climatic conditions.

Spatiotemporal Dynamics of Net Primary Productivity in China’s Urban Lands during 1982–2015

The rapid urbanization process has threatened the ecological environment. Net primary productivity (NPP) can effectively indicate vegetation growth status in an urban area. In this paper, we evaluated the change in NPP in China and China’s urban lands and assessed the impact of temperature, precipitation, the sunshine duration, and vegetation loss due to urban expansion on NPP in China’s three fast-growing urban agglomerations and their buffer zones (~5–20 km). The results indicated that the NPP in China exhibited an increasing trend. In contrast, the NPP in China’s urban lands showed a decreasing trend. However, after 1997, China’s increasing trend in NPP slowed (from 9.59 Tg C/yr to 8.71 Tg C/yr), while the decreasing trend in NPP in China’s urban lands weakened. Moreover, we found that the NPP in the Beijing–Tianjin–Hebei urban agglomeration (BTHUA), the Yangtze River Delta urban agglomeration (YRDUA), and the Pearl River Delta urban agglomeration (PRDUA) showed a decreasing trend. The NPP in the BTHUA showed an increasing trend in the buffer zones, which was positively affected by temperature and sunshine duration. Additionally, nonsignificant vegetation loss could promote the increase of NPP. In the YRDUA, the increasing temperature was the main factor that promoted the increase of NPP. The effect of temperature on NPP could almost offset the inhibition of vegetation reduction on the increase of NPP as the buffer zone expanded. In PRDUA, sunshine duration and vegetation loss were the main factors decreasing NPP. Our results will support future urban NPP prediction and government policymaking.