GIS-Based Machine Learning Algorithms for Gully Erosion Susceptibility Mapping in a Semi-Arid Region of Iran

Empirical models for compressive and tensile strength of basalt fiber reinforced concrete

When molten magma solidifies, basalt fiber (BF) is produced as a byproduct. Due to its remaining pollutants that could affect the environment, it is regarded as a waste product. To determine the compressive strength (CS) and tensile strength (TS) of basalt fiber reinforced concrete (BFRC), this study will develop empirical models using gene expression programming (GEP), Artificial Neural Network (ANN) and Extreme Gradient Boosting (XG Boost). A thorough search of the literature was done to compile a variety of information on the CS and TS of BFRC. 153 CS findings and 127 TS outcomes were included in the review. The water-to-cement, BF, fiber length (FL), and coarse aggregates ratios were the influential characteristics found. The outcomes showed that GEP can accurately forecast the CS and TS of BFRC as compared to ANN and XG Boost. Efficiency of GEP was validated by comparing Regression (R2) value of all three models. It was shown that the CS and TS of BFRC increased initially up to a certain limit and then started decreasing as the BF % and FL increased. The ideal BF content for industrial-scale BF reinforcement of concrete was investigated in this study which could be an economical solution for production of BFRC on industrial scale.

Dust detection and susceptibility mapping by aiding satellite imagery time series and integration of ensemble machine learning with evolutionary algorithms

To mitigate the impact of dust on human health and the environment, it is crucial to create a model and map that identifies the areas susceptible to dust. The present study focused on identifying dust occurrences in the Bushehr province of Iran between 2002 and 2022 using moderate-resolution imaging spectroradiometer (MODIS) imagery. Subsequently, an ensemble machine learning model was improved to prepare a dust susceptibility map (DSM). The study employed differential evolution (DE), genetic algorithm (GA), and flower pollination algorithm (FPA) - three evolutionary algorithms - to enhance the random forest (RF) ensemble model. A spatial database was created for modeling, including 519 dust occurrence points (extracted from MODIS imagery) and 15 factors affecting dust (Slope, bulk density, aspect, clay, altitude, sand, rainfall, lithology, soil order, distance to river, soil texture, normalized difference vegetation index (NDVI), soil water content, land cover, and wind speed). By utilizing the differential evolution (DE) algorithm, we determined the significance of these factors in impacting dust occurrences. The results indicated that altitude, wind speed, and land cover were the most influential factors, while the distance to the river, bulk density, and soil texture had less impact on dust occurrence. Data were preprocessed using multicollinearity analysis and the frequency ratio (FR) approach. For this research, three RF-based meta-heuristic optimization algorithms, namely RF-FPA, RF-GA, and RF-DE, were created for DSM. The effectiveness prediction of the constructed models by indexes of root-mean-square-error (RMSE), the area under the receiver operating characteristic (AUC-ROC), and coefficient of determination (R2) from best to worst were RF-DE (RMSE = 0.131, AUC-ROC = 0.988, and R2 = 0.93), RF-GA (RMSE = 0.141, AUC-ROC = 0.986, and R2 = 0.919), RF-FPA (RMSE = 0.157, AUC-ROC = 0.981, and R2 = 0.9), and RF (RMSE = 0.173, AUC-ROC = 0.964, and R2 = 0.878). The results showed that combining evolutionary algorithms with an RF model improves the accuracy of dust susceptibility modeling.

Land subsidence susceptibility mapping: comparative assessment of the efficacy of the five models

Land subsidence (LS) as a major geological and hydrological hazard poses a major threat to safety and security. The various triggers of LS include intense extraction of aquifer bodies. In this study, we present an LS inventory map of the Daumeghan plain of Iran using 123 LS and 123 non-LS locations which were identified through field survey. Fourteen LS causative factors related to topography, geology, hydrology, and anthropogenic characteristics were selected based on multi-collinearity test. Based on the results, five susceptibility maps were generated employing models and input data. The LS susceptibility models were evaluated and validated using the receiver operating characteristic (ROC) curve and statistical indices. The results indicate that the LS susceptibility maps produced have good accuracy in predicting the spatial distribution of LS in the study area. The result showed that the optimization models BA and GWO were better than the other machine learning algorithm (MLA). In addition, The BA model has 96.6% area under of ROC (AUROC) followed by GWO (95.8%), BART (94.5%), BRT (93.1%), and SVR (92.7%). The LS susceptibility maps formulated in our study can serve as a useful tool for formulating mitigation strategies and for better land-use planning.

Flood susceptibility evaluation through deep learning optimizer ensembles and GIS techniques

It is difficult to predict and model with an accurate model the floods, that are one of the most destructive risks across the earth's surface. The main objective of this research is to show the prediction power of three ensemble algorithms with respect to flood susceptibility estimation. These algorithms are: Iterative Classifier Optimizer - Alternating Decision Tree - Frequency Ratio (ICO-ADT-FR), Iterative Classifier Optimizer - Deep Learning Neural Network - Frequency Ratio (ICO-DLNN-FR) and Iterative Classifier Optimizer - Multilayer Perceptron - Frequency Ratio (ICO-MLP-FR). The first stage of the manuscript consisted of the collection and processing of the geodatabase needed in the present study. The geodatabase comprises a number of 14 flood predictors and 132 known flood locations. The Correlation-based Feature Selection (CFS) method was used in order to assess the prediction capacity of the 14 predictors in terms of flood susceptibility estimation. The training and validation of the three ensemble models constitute the next stage of the scientific workflow. Several statistical metrics and ROC curve method were involved in the evaluation of the model's performance and accuracy. According to ROC curves all the models achieved high performances since their AUC had values above 0.89. ICO-DLNN-FR proved to be the most accurate model (AUC = 0.959). The outcomes of the study can be used to guide future flood risk management and sustainable land-use planning in the designated area.

Hybrid Machine Learning Approach for Gully Erosion Mapping Susceptibility at a Watershed Scale

Gully erosion is a serious threat to the state of ecosystems all around the world. As a result, safeguarding the soil for our own benefit and from our own actions is a must for guaranteeing the long-term viability of a variety of ecosystem services. As a result, developing gully erosion susceptibility maps (GESM) is both suggested and necessary. In this study, we compared the effectiveness of three hybrid machine learning (ML) algorithms with the bivariate statistical index frequency ratio (FR), named random forest-frequency ratio (RF-FR), support vector machine-frequency ratio (SVM-FR), and naïve Bayes-frequency ratio (NB-FR), in mapping gully erosion in the GHISS watershed in the northern part of Morocco. The models were implemented based on the inventory mapping of a total number of 178 gully erosion points randomly divided into 2 groups (70% of points were used for training the models and 30% of points were used for the validation process), and 12 conditioning variables (i.e., elevation, slope, aspect, plane curvature, topographic moisture index (TWI), stream power index (SPI), precipitation, distance to road, distance to stream, drainage density, land use, and lithology). Using the equal interval reclassification method, the spatial distribution of gully erosion was categorized into five different classes, including very high, high, moderate, low, and very low. Our results showed that the very high susceptibility classes derived using RF-FR, SVM-FR, and NB-FR models covered 25.98%, 22.62%, and 27.10% of the total area, respectively. The area under the receiver (AUC) operating characteristic curve, precision, and accuracy were employed to evaluate the performance of these models. Based on the receiver operating characteristic (ROC), the results showed that the RF-FR achieved the best performance (AUC = 0.91), followed by SVM-FR (AUC = 0.87), and then NB-FR (AUC = 0.82), respectively. Our contribution, in line with the Sustainable Development Goals (SDGs), plays a crucial role for understanding and identifying the issue of “where and why” gully erosion occurs, and hence it can serve as a first pathway to reducing gully erosion in this particular area.

A Systematic Review of the Research Development on the Application of Machine Learning for Concrete

Research on the applications of new techniques such as machine learning is advancing rapidly. Machine learning methods are being employed to predict the characteristics of various kinds of concrete such as conventional concrete, recycled aggregate concrete, geopolymer concrete, fiber-reinforced concrete, etc. In this study, a scientometric-based review on machine learning applications for concrete was performed in order to evaluate the crucial characteristics of the literature. Typical review studies are limited in their capacity to link divergent portions of the literature systematically and precisely. Knowledge mapping, co-citation, and co-occurrence are among the most challenging aspects of innovative studies. The Scopus database was chosen for searching for and retrieving the data required to achieve the study’s aims. During the data analysis, the relevant sources of publications, relevant keywords, productive writers based on publications and citations, top articles based on citations received, and regions actively engaged in research into machine learning applications for concrete were identified. The citation, bibliographic, abstract, keyword, funding, and other data from 1367 relevant documents were retrieved and analyzed using the VOSviewer software tool. The application of machine learning in the construction sector will be advantageous in terms of economy, time-saving, and reduced requirement for effort. This study can aid researchers in building joint endeavors and exchanging innovative ideas and methods, due to the statistical and graphical portrayal of participating authors and countries.

Gully Erosion Susceptibility Mapping in Highly Complex Terrain Using Machine Learning Models

Gully erosion is the most severe type of water erosion and is a major land degradation process. Gully erosion susceptibility mapping (GESM)’s efficiency and interpretability remains a challenge, especially in complex terrain areas. In this study, a WoE-MLC model was used to solve the above problem, which combines machine learning classification algorithms and the statistical weight of evidence (WoE) model in the Loess Plateau. The three machine learning (ML) algorithms utilized in this research were random forest (RF), gradient boosted decision trees (GBDT), and extreme gradient boosting (XGBoost). The results showed that: (1) GESM were well predicted by combining both machine learning regression models and WoE-MLC models, with the area under the curve (AUC) values both greater than 0.92, and the latter was more computationally efficient and interpretable; (2) The XGBoost algorithm was more efficient in GESM than the other two algorithms, with the strongest generalization ability and best performance in avoiding overfitting (averaged AUC = 0.947), followed by the RF algorithm (averaged AUC = 0.944), and GBDT algorithm (averaged AUC = 0.938); and (3) slope gradient, land use, and altitude were the main factors for GESM. This study may provide a possible method for gully erosion susceptibility mapping at large scale.

A multi-hazard map-based flooding, gully erosion, forest fires, and earthquakes in Iran

We used three state-of-the-art machine learning techniques (boosted regression tree, random forest, and support vector machine) to produce a multi-hazard (MHR) map illustrating areas susceptible to flooding, gully erosion, forest fires, and earthquakes in Kohgiluyeh and Boyer-Ahmad Province, Iran. The earthquake hazard map was derived from a probabilistic seismic hazard analysis. The mean decrease Gini (MDG) method was implemented to determine the relative importance of effective factors on the spatial occurrence of each of the four hazards. Area under the curve (AUC) plots, based on a validation dataset, were created for the maps generated using the three algorithms to compare the results. The random forest model had the highest predictive accuracy, with AUC values of 0.994, 0.982, and 0.885 for gully erosion, flooding, and forest fires, respectively. Approximately 41%, 40%, 28%, and 3% of the study area are at risk of forest fires, earthquakes, floods, and gully erosion, respectively.

Machine Learning in Agriculture: A Comprehensive Updated Review

The digital transformation of agriculture has evolved various aspects of management into artificial intelligent systems for the sake of making value from the ever-increasing data originated from numerous sources. A subset of artificial intelligence, namely machine learning, has a considerable potential to handle numerous challenges in the establishment of knowledge-based farming systems. The present study aims at shedding light on machine learning in agriculture by thoroughly reviewing the recent scholarly literature based on keywords' combinations of "machine learning" along with "crop management", "water management", "soil management", and "livestock management", and in accordance with PRISMA guidelines. Only journal papers were considered eligible that were published within 2018-2020. The results indicated that this topic pertains to different disciplines that favour convergence research at the international level. Furthermore, crop management was observed to be at the centre of attention. A plethora of machine learning algorithms were used, with those belonging to Artificial Neural Networks being more efficient. In addition, maize and wheat as well as cattle and sheep were the most investigated crops and animals, respectively. Finally, a variety of sensors, attached on satellites and unmanned ground and aerial vehicles, have been utilized as a means of getting reliable input data for the data analyses. It is anticipated that this study will constitute a beneficial guide to all stakeholders towards enhancing awareness of the potential advantages of using machine learning in agriculture and contributing to a more systematic research on this topic.

A Study on Prediction Model of Gully Volume Based on Morphological Features in the JINSHA Dry-Hot Valley Region of Southwest China

Gully erosion is well-developed in the Jinsha dry-hot valley region, which has caused serious soil losses. Gully volume is regarded as an effective indicator that can reflect the development intensity of gully erosion, and the evolutionary processes of gullies can be predicted based on the dynamic variation in gully volume. Establishing an effective prediction model of gully volume is essential to determine gully volume accurately and conveniently. Therefore, in this work, an empirical prediction model of gully volume was constructed and verified based on detailed morphological features acquired by elaborate field investigations and measurements in 134 gullies. The results showed the mean value of gully length, width, depth, cross-section area, volume, and vertical gradient decreased with the weakness of the activity degree of the gully, although the decrease in processes of these parameters had some differences. Moreover, a series of empirical prediction models of gully volume was constructed, and gully length was demonstrated to be a better predictor than other morphological features. Lastly, the effectiveness test showed the model of V = aL^b was the most effective in predicting gully volume among the different models established in this study. Our results provide a useful approach to predict gully volume in dry-hot valley regions.

Evaluation of different boosting ensemble machine learning models and novel deep learning and boosting framework for head-cut gully erosion susceptibility

The objective of this study is to assess the gully head-cut erosion susceptibility and identify gully erosion prone areas in the Meimand watershed, Iran. In recent years, this study area has been greatly influenced by several head-cut gullies due to unusual climatic factors and human induced activity. The present study is therefore intended to address this issue by developing head-cut gully erosion prediction maps using boosting ensemble machine learning algorithms, namely Boosted Tree (BT), Boosted Generalized Linear Models (BGLM), Boosted Regression Tree (BRT), Extreme Gradient Boosting (XGB), and Deep Boost (DB). Initially, we produced a gully erosion inventory map using a variety of resources, including published reports, Google Earth images, and field records of the Global Positioning System (GPS). Subsequently, we distributed this information randomly and choose 70% (102) of the test gullies and the remaining 30% (43) for validation. The methodology was designed using morphometric and thematic determinants, including 14 head-cut gully erosion conditioning features. We have also investigated the following: (a) Multi-collinearity analysis to determine the linearity of the independent variables, (b) Predictive capability of piping models using train and test dataset and (c) Variables importance affecting head-cut gully erosion. The study reveals that altitude, land use, distances from road and soil characteristics influenced the method with the greatest impact on head-cut gully erosion susceptibility. We presented five head-cut gully erosion susceptibility maps and investigated their predictive accuracy through area under curve (AUC). The AUC test reveals that the DB machine learning method demonstrated significantly higher accuracy (AUC = 0.95) than the BT (AUC = 0.93), BGLM (AUC = 0.91), BRT (AUC = 0.94) and XGB (AUC = 0.92) approaches. The predicted head-cut gully erosion susceptibility maps can be used by policy makers and local authorities for soil conservation and to prevent threats to human activities.

An Overview of Flood Risk Analysis Methods

Scientific papers present a wide range of methods of flood analysis and forecasting. Floods are a phenomenon with significant socio-economic implications, for which many researchers try to identify the most appropriate methodologies to analyze their temporal and spatial development. This research aims to create an overview of flood analysis and forecasting methods. The study is based on the need to select and group papers into well-defined methodological categories. The article provides an overview of recent developments in the analysis of flood methodologies and shows current research directions based on this overview. The study was performed taking into account the information included in the Web of Science Core Collection, which brought together 1326 articles. The research concludes with a discussion on the relevance, ease of application, and usefulness of the methodologies.

A Methodological Comparison of Three Models for Gully Erosion Susceptibility Mapping in the Rural Municipality of El Faid (Morocco)

Erosion is the main threat to sustainable water and soil management in Morocco. Located in the Souss-Massa watershed, the rural municipality of El Faid remains an area where gully erosion is a major factor involved in soil degradation and flooding. The aim of this study is to predict the spatial distribution of gully erosion at the scale of this municipality and to evaluate the predictive capacity of three prediction methods (frequency ratio (FR), logistic regression (LR), and random forest (RF)) for the characterization of gullying vulnerability. Twelve predisposing factors underlying gully formation were considered and mapped (elevation, slope, aspect, plane curvature, slope length (SL), stream power index (SPI), composite topographic index (CTI), land use, topographic wetness index (TWI), normalized difference vegetation index (NDVI), lithology, and vegetation cover (C factor). Furthermore, 894 gullies were digitized using high-resolution imagery. Seventy-five percent of the gullies were randomly selected and used as a training dataset, whereas the remaining 25% were used for validation purposes. The prediction accuracy was evaluated using area under the curve (AUC). Results showed that the factor that most contributed to the prevalence of gullying was topographic (slope, CTI, LS). Furthermore, the fitted models revealed that the RF model had a better prediction quality, with the best AUC (91.49%). The produced maps represent a valuable tool for sustainable management, land conservation, and protecting human lives against natural hazards (floods).

Spatial Prediction of Future Flood Risk: An Approach to the Effects of Climate Change

Preparation of a flood probability map serves as the first step in a flood management program. This research develops a probability flood map for floods resulting from climate change in the future. Two models of Flexible Discrimination Analysis (FDA) and Artificial Neural Network (ANN) were used. Two optimistic (RCP2.6) and pessimistic (RCP8.5) climate change scenarios were considered for mapping future rainfall. Moreover, to produce probability flood occurrence maps, 263 locations of past flood events were used as dependent variables. The number of 13 factors conditioning floods was taken as independent variables in modeling. Of the total 263 flood locations, 80% (210 locations) and 20% (53 locations) were considered model training and validation. The Receiver Operating Characteristic (ROC) curve and other statistical criteria were used to validate the models. Based on assessments of the validated models, FDA, with a ROC-AUC = 0.918, standard error (SE = 0.038), and an accuracy of 0.86% compared to the ANN model with a ROC-AUC = 0.897, has the highest accuracy in preparing the flood probability map in the study area. The modeling results also showed that the factors of distance from the River, altitude, slope, and rainfall have the greatest impact on floods in the study area. Both models’ future flood susceptibility maps showed that the highest area is related to the very low class. The lowest area is related to the high class.

Combining Evolutionary Algorithms and Machine Learning Models in Landslide Susceptibility Assessments

The main objective of the present study is to introduce a novel predictive model that combines evolutionary algorithms and machine learning (ML) models, so as to construct a landslide susceptibility map. Genetic algorithms (GA) are used as a feature selection method, whereas the particle swarm optimization (PSO) method is used to optimize the structural parameters of two ML models, support vector machines (SVM) and artificial neural network (ANN). A well-defined spatial database, which included 335 landslides and twelve landslide-related variables (elevation, slope angle, slope aspect, curvature, plan curvature, profile curvature, topographic wetness index, stream power index, distance to faults, distance to river, lithology, and hydrological cover) are considered for the analysis, in the Achaia Regional Unit located in Northern Peloponnese, Greece. The outcome of the study illustrates that both ML models have an excellent performance, with the SVM model achieving the highest learning accuracy (0.977 area under the receiver operating characteristic curve value (AUC)), followed by the ANN model (0.969). However, the ANN model shows the highest prediction accuracy (0.800 AUC), followed by the SVM (0.750 AUC) model. Overall, the proposed ML models highlights the necessity of feature selection and tuning procedures via evolutionary optimization algorithms and that such approaches could be successfully used for landslide susceptibility mapping as an alternative investigation tool.

Performance Evaluation and Comparison of Bivariate Statistical-Based Artificial Intelligence Algorithms for Spatial Prediction of Landslides

The purpose of this study is to compare nine models, composed of certainty factors (CFs), weights of evidence (WoE), evidential belief function (EBF) and two machine learning models, namely random forest (RF) and support vector machine (SVM). In the first step, fifteen landslide conditioning factors were selected to prepare thematic maps, including slope aspect, slope angle, elevation, stream power index (SPI), sediment transport index (STI), topographic wetness index (TWI), plan curvature, profile curvature, land use, normalized difference vegetation index (NDVI), soil, lithology, rainfall, distance to rivers and distance to roads. In the second step, 152 landslides were randomly divided into two groups at a ratio of 70/30 as the training and validation datasets. In the third step, the weights of the CF, WoE and EBF models for conditioning factor were calculated separately, and the weights were used to generate the landslide susceptibility maps. The weights of each bivariate model were substituted into the RF and SVM models, respectively, and six integrated models and landslide susceptibility maps were obtained. In the fourth step, the receiver operating characteristic (ROC) curve and related parameters were used for verification and comparison, and then the success rate curve and the prediction rate curves were used for re-analysis. The comprehensive results showed that the hybrid model is superior to the bivariate model, and all nine models have excellent performance. The WoE–RF model has the highest predictive ability (AUC_T: 0.9993, AUC_P: 0.8968). The landslide susceptibility maps produced in this study can be used to manage landslide hazard and risk in Linyou County and other similar areas.

Novel Credal Decision Tree-Based Ensemble Approaches for Predicting the Landslide Susceptibility

Landslides are natural and often quasi-normal threats that destroy natural resources and may lead to a persistent loss of human life. Therefore, the preparation of landslide susceptibility maps is necessary in order to mitigate harmful effects. The key objective of this research is to develop landslide susceptibility maps for the Taleghan basin of Alborz province, Iran, using hybrid Machine Learning (ML) algorithms, i.e., k-fold cross validation and ML techniques of credal decision tree (CDT), Alternative Decision Tree (ADTree), and their ensemble method (CDT-ADTree), which have been state-of-the-art soft computing techniques rarely used in the case of landslide susceptibility assessments. In this study, 22 key landslide causative factors (LCFs) were considered to explore their spatial relationship to landslides, based on local geomorphological and geo-environmental influences. The Random Forest (RF) algorithm was used for the identification of variables importance of different LCFs that are more prone to landslide susceptibility. A receiver operation characteristics (ROC) curve with area under the curve (AUC), accuracy, precision, and robustness index was used to evaluate and compare landslide susceptibility models. The output of the model performance shows that the CDT-ADTree model is the more robust model for the landslide susceptibility where the AUC, accuracy, and precision are 0.981, 0.837, and 0.867, respectively, than the standalone model of CDT and ADTree model. Therefore, it is concluded that the CDT-ADTree ensemble model can be applied as a new promising technique for spatial prediction of the landslide in further studies.