Identification of Amaranthus Species Using Visible-Near-Infrared (Vis-NIR) Spectroscopy and Machine Learning Methods

Non-invasive prediction of maca powder adulteration using a pocket-sized spectrophotometer and machine learning techniques

Discriminating different cultivars of maca powder (MP) and detecting their authenticity after adulteration with potent adulterants such as maize and soy flour is a challenge that has not been studied with non-invasive techniques such as near infrared spectroscopy (NIRS). This study developed models to rapidly classify and predict 0, 10, 20, 30, 40, and 50% w/w of soybean and maize flour in red, black and yellow maca cultivars using a handheld spectrophotometer and chemometrics. Soy and maize adulteration of yellow MP was classified with better accuracy than in red MP, suggesting that red MP may be a more susceptible target for adulteration. Soy flour was discovered to be a more potent adulterant compared to maize flour. Using 18 different pretreatments, MP could be authenticated with R2CV in the range 0.91-0.95, RMSECV 6.81-9.16 g/,100 g and RPD 3.45-4.60. The results show the potential of NIRS for monitoring Maca quality.

Monitoring the Effect of Weed Encroachment on Cattle Behavior in Grazing Systems Using GPS Tracking Collars

Weed encroachment on grasslands can negatively affect herbage allowance and animal behavior, impacting livestock production. We used low-cost GPS collars fitted to twenty-four Angus crossbred steers to evaluate the effects of different levels of weed encroachment on animal activities and spatial distribution. The experiment was established with a randomized complete block design, with three treatments and four blocks. The treatments were paddocks free of weeds (weed-free), paddocks with weeds established in alternated strips (weed-strips), and paddocks with weeds spread throughout the entire area (weed-infested). Animals in weed-infested paddocks had reduced resting time and increased grazing time, distance traveled, and rate of travel (p < 0.05) compared to animals in weed-free paddocks. The spatial distribution of the animals was consistently greater in weed-free paddocks than in weed-strips or weed-infested areas. The effects of weed encroachment on animal activities were minimized after weed senescence at the end of the growing season. Pasture weed encroachment affected cattle behavior and their spatial distribution across the pasture, potentially impacting animal welfare. Further long-term studies are encouraged to evaluate the impacts of weed encroachment on animal performance and to quantify the effects of behavioral changes on animal energy balance.

Boosting precision crop protection towards agriculture 5.0 via machine learning and emerging technologies: A contextual review

Crop protection is a key activity for the sustainability and feasibility of agriculture in a current context of climate change, which is causing the destabilization of agricultural practices and an increase in the incidence of current or invasive pests, and a growing world population that requires guaranteeing the food supply chain and ensuring food security. In view of these events, this article provides a contextual review in six sections on the role of artificial intelligence (AI), machine learning (ML) and other emerging technologies to solve current and future challenges of crop protection. Over time, crop protection has progressed from a primitive agriculture 1.0 (Ag1.0) through various technological developments to reach a level of maturity closelyin line with Ag5.0 (section 1), which is characterized by successfully leveraging ML capacity and modern agricultural devices and machines that perceive, analyze and actuate following the main stages of precision crop protection (section 2). Section 3 presents a taxonomy of ML algorithms that support the development and implementation of precision crop protection, while section 4 analyses the scientific impact of ML on the basis of an extensive bibliometric study of >120 algorithms, outlining the most widely used ML and deep learning (DL) techniques currently applied in relevant case studies on the detection and control of crop diseases, weeds and plagues. Section 5 describes 39 emerging technologies in the fields of smart sensors and other advanced hardware devices, telecommunications, proximal and remote sensing, and AI-based robotics that will foreseeably lead the next generation of perception-based, decision-making and actuation systems for digitized, smart and real-time crop protection in a realistic Ag5.0. Finally, section 6 highlights the main conclusions and final remarks.

Structural Analysis and Classification of Low-Molecular-Weight Hyaluronic Acid by Near-Infrared Spectroscopy: A Comparison between Traditional Machine Learning and Deep Learning

Confusing low-molecular-weight hyaluronic acid (LMWHA) from acid degradation and enzymatic hydrolysis (named LMWHA-A and LMWHA-E, respectively) will lead to health hazards and commercial risks. The purpose of this work is to analyze the structural differences between LMWHA-A and LMWHA-E, and then achieve a fast and accurate classification based on near-infrared (NIR) spectroscopy and machine learning. First, we combined nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR) spectroscopy, two-dimensional correlated NIR spectroscopy (2DCOS), and aquaphotomics to analyze the structural differences between LMWHA-A and LMWHA-E. Second, we compared the dimensionality reduction methods including principal component analysis (PCA), kernel PCA (KPCA), and t-distributed stochastic neighbor embedding (t-SNE). Finally, the differences in classification effect of traditional machine learning methods including partial least squares-discriminant analysis (PLS-DA), support vector classification (SVC), and random forest (RF) as well as deep learning methods including one-dimensional convolutional neural network (1D-CNN) and long short-term memory (LSTM) were compared. The results showed that genetic algorithm (GA)-SVC and RF were the best performers in traditional machine learning, but their highest accuracy in the test dataset was 90%, while the accuracy of 1D-CNN and LSTM models in the training dataset and test dataset classification was 100%. The results of this study show that compared with traditional machine learning, the deep learning models were better for the classification of LMWHA-A and LMWHA-E. Our research provides a new methodological reference for the rapid and accurate classification of biological macromolecules.

Discrimination of Brassica juncea Varieties Using Visible Near-Infrared (Vis-NIR) Spectroscopy and Chemometrics Methods

Brown mustard (Brassica juncea (L.) is an important oilseed crop that is mostly used to produce edible oils, industrial oils, modified lipids and biofuels in subtropical nations. Due to its higher level of commercial use, the species has a huge array of varieties/cultivars. The purpose of this study is to evaluate the use of visible near-infrared (Vis-NIR) spectroscopy in combination with multiple chemometric approaches for distinguishing four B. juncea varieties in Korea. The spectra from the leaves of four different growth stages of four B. juncea varieties were measured in the Vis-NIR range of 325–1075 nm with a stepping of 1.5 nm in reflectance mode. For effective discrimination, the spectral data were preprocessed using three distinct approaches, and eight different chemometric analyses were utilized. After the detection of outliers, the samples were split into two groups, one serving as a calibration set and the other as a validation set. When numerous preprocessing and chemometric approaches were applied for discriminating, the combination of standard normal variate and deep learning had the highest classification accuracy in all the growth stages achieved up to 100%. Similarly, few other chemometrics also yielded 100% classification accuracy, namely, support vector machine, generalized linear model, and the random forest. Of all the chemometric preprocessing methods, Savitzky–Golay filter smoothing provided the best and most convincing discrimination. The findings imply that chemometric methods combined with handheld Vis-NIR spectroscopy can be utilized as an efficient tool for differentiating B. juncea varieties in the field in all the growth stages.

Vis-NIR Spectroscopy and Machine Learning Methods for the Discrimination of Transgenic Brassica napus L. and Their Hybrids with B. juncea

The rapid advancement of genetically modified (GM) technology over the years has raised concerns about the safety of GM crops and foods for human health and the environment. Gene flow from GM crops may be a threat to the environment. Therefore, it is critical to develop reliable, rapid, and low-cost technologies for detecting and monitoring the presence of GM crops and crop products. Here, we used visible near-infrared (Vis-NIR) spectroscopy to distinguish between GM and non-GM Brassica napus, B. juncea, and F1 hybrids (B. juncea X GM B. napus). The Vis-NIR spectra were preprocessed with different preprocessing methods, namely normalization, standard normal variate, and Savitzky–Golay. Both raw and preprocessed spectra were used in combination with eight different chemometric methods for the effective discrimination of GM and non-GM plants. The standard normal variate and support vector machine combination was determined to be the most accurate model in the discrimination of GM, non-GM, and hybrid plants among the many combinations (99.4%). The use of deep learning in combination with Savitzky–Golay resulted in 99.1% classification accuracy. According to the findings, it is concluded that handheld Vis-NIR spectroscopy combined with chemometric analyses could be used to distinguish between GM and non-GM B. napus, B. juncea, and F1 hybrids.

Discrimination of Transgenic Canola (Brassica napus L.) and their Hybrids with B. rapa using Vis-NIR Spectroscopy and Machine Learning Methods

In recent years, the rapid development of genetically modified (GM) technology has raised concerns about the safety of GM crops and foods for human health and the ecological environment. Gene flow from GM crops to other crops, especially in the Brassicaceae family, might pose a threat to the environment due to their weediness. Hence, finding reliable, quick, and low-cost methods to detect and monitor the presence of GM crops and crop products is important. In this study, we used visible near-infrared (Vis-NIR) spectroscopy for the effective discrimination of GM and non-GM Brassica napus, B. rapa, and F1 hybrids (B. rapa X GM B. napus). Initially, Vis-NIR spectra were collected from the plants, and the spectra were preprocessed. A combination of different preprocessing methods (four methods) and various modeling approaches (eight methods) was used for effective discrimination. Among the different combinations, the Savitzky-Golay and Support Vector Machine combination was found to be an optimal model in the discrimination of GM, non-GM, and hybrid plants with the highest accuracy rate (100%). The use of a Convolutional Neural Network with Normalization resulted in 98.9%. The same higher accuracy was found in the use of Gradient Boosted Trees and Fast Large Margin approaches. Later, phenolic acid concentration among the different plants was assessed using GC-MS analysis. Partial least squares regression analysis of Vis-NIR spectra and biochemical characteristics showed significant correlations in their respective changes. The results showed that handheld Vis-NIR spectroscopy combined with chemometric analyses could be used for the effective discrimination of GM and non-GM B. napus, B. rapa, and F1 hybrids. Biochemical composition analysis can also be combined with the Vis-NIR spectra for efficient discrimination.