Improved classification of Orthosiphon stamineus by data fusion of electronic nose and tongue sensors

Toward the Development of Combined Artificial Sensing Systems for Food Quality Evaluation: A Review on the Application of Data Fusion of Electronic Noses, Electronic Tongues and Electronic Eyes

Devices known as electronic noses (ENs), electronic tongues (ETs), and electronic eyes (EEs) have been developed in recent years in the in situ study of real matrices with little or no manipulation of the sample at all. The final goal could be the evaluation of overall quality parameters such as sensory features, indicated by the "smell", "taste", and "color" of the sample under investigation or in the quantitative detection of analytes. The output of these sensing systems can be analyzed using multivariate data analysis strategies to relate specific patterns in the signals with the required information. In addition, using suitable data-fusion techniques, the combination of data collected from ETs, ENs, and EEs can provide more accurate information about the sample than any of the individual sensing devices. This review's purpose is to collect recent advances in the development of combined ET, EN, and EE systems for assessing food quality, paying particular attention to the different data-fusion strategies applied.

Comparison of Sensory Qualities in Eggs from Three Breeds Based on Electronic Sensory Evaluations

The present study was conducted on three commercial laying breeder strains to evaluate differences of sensory qualities, including texture, smell, and taste parameters. A total of 140 eggs for each breed were acquired from Beinong No.2 (B) laying hens, Hy-Line Brown (H) laying hens, and Wuhei (W) laying hens. Sensory qualities of egg yolks and albumen from three breeds were detected and discriminated based on different algorithms. Texture profile analysis (TPA) showed that the eggs from three breeds had no differences in hardness, adhesiveness, springiness, and chewiness other than cohesiveness. The smell profiles measured by electronic nose illustrated that differences existed in all 10 sensors for albumen and 8 sensors for yolks. The taste profiles measured by electronic tongue found that the main difference of egg yolks and albumen existed in bitterness and astringency. Principal component analysis (PCA) successfully showed grouping of three breeds based on electronic nose data and failed in grouping based on electronic tongue data. Based on electronic nose data, linear discriminant analysis (LDA), fine k-nearest neighbor (KNN) and linear support vector machine (SVM) were performed to discriminate yolks, albumen, and the whole eggs with 100% classification accuracy. While based on electronic tongue data, the best classification accuracy was 96.7% for yolks by LDA and fine tree, 88.9% for albumen by LDA, and 87.5% for the whole eggs by fine KNN. The experiment results showed that three breeds’ eggs had main differences in smells and could be successfully discriminated by LDA, fine KNN, and linear SVM algorithms based on electronic nose.

Comparison of SVM, RF and ELM on an Electronic Nose for the Intelligent Evaluation of Paraffin Samples

Paraffin odor intensity is an important quality indicator when a paraffin inspection is performed. Currently, paraffin odor level assessment is mainly dependent on an artificial sensory evaluation. In this paper, we developed a paraffin odor analysis system to classify and grade four kinds of paraffin samples. The original feature set was optimized using Principal Component Analysis (PCA) and Partial Least Squares (PLS). Support Vector Machine (SVM), Random Forest (RF), and Extreme Learning Machine (ELM) were applied to three different feature data sets for classification and level assessment of paraffin. For classification, the model based on SVM, with an accuracy rate of 100%, was superior to that based on RF, with an accuracy rate of 98.33-100%, and ELM, with an accuracy rate of 98.01-100%. For level assessment, the R² related to the training set was above 0.97 and the R² related to the test set was above 0.87. Through comprehensive comparison, the generalization of the model based on ELM was superior to those based on SVM and RF. The scoring errors for the three models were 0.0016-0.3494, lower than the error of 0.5-1.0 measured by industry standard experts, meaning these methods have a higher prediction accuracy for scoring paraffin level.

A Framework for the Multi-Level Fusion of Electronic Nose and Electronic Tongue for Tea Quality Assessment

Electronic nose (E-nose) and electronic tongue (E-tongue) can mimic the sensory perception of human smell and taste, and they are widely applied in tea quality evaluation by utilizing the fingerprints of response signals representing the overall information of tea samples. The intrinsic part of human perception is the fusion of sensors, as more information is provided comparing to the information from a single sensory organ. In this study, a framework for a multi-level fusion strategy of electronic nose and electronic tongue was proposed to enhance the tea quality prediction accuracies, by simultaneously modeling feature fusion and decision fusion. The procedure included feature-level fusion (fuse the time-domain based feature and frequency-domain based feature) and decision-level fusion (D-S evidence to combine the classification results from multiple classifiers). The experiments were conducted on tea samples collected from various tea providers with four grades. The large quantity made the quality assessment task very difficult, and the experimental results showed much better classification ability for the multi-level fusion system. The proposed algorithm could better represent the overall characteristics of tea samples for both odor and taste.

New sensor technologies in quality evaluation of Chinese materia medica: 2010-2015

New sensor technologies play an important role in quality evaluation of Chinese materia medica (CMM) and include near-infrared spectroscopy, chemical imaging, electronic nose and electronic tongue. This review on quality evaluation of CMM and the application of the new sensors in this assessment is based on studies from 2010 to 2015, with prospects and opportunities for future research.

Classification of E-Nose Aroma Data of Four Fruit Types by ABC-Based Neural Network

Electronic nose technology is used in many areas, and frequently in the beverage industry for classification and quality-control purposes. In this study, four different aroma data (strawberry, lemon, cherry, and melon) were obtained using a MOSES II electronic nose for the purpose of fruit classification. To improve the performance of the classification, the training phase of the neural network with two hidden layers was optimized using artificial bee colony algorithm (ABC), which is known to be successful in exploration. Test data were given to two different neural networks, each of which were trained separately with backpropagation (BP) and ABC, and average test performances were measured as 60% for the artificial neural network trained with BP and 76.39% for the artificial neural network trained with ABC. Training and test phases were repeated 30 times to obtain these average performance measurements. This level of performance shows that the artificial neural network trained with ABC is successful in classifying aroma data.

Selected metabolites profiling of Orthosiphon stamineus Benth leaves extracts combined with chemometrics analysis and correlation with biological activities

BACKGROUND

Studies on selected metabolites profiling of Orthosiphon stamineus extracts using chromatographic and spectroscopic techniques combined with chemometric tools have not been fully elucidated. Thus present study was performed to profile selected metabolites in O. stamineus leaves extracts using HPLC and FTIR combined with chemometric tools and correlated with biological activities.

METHODS

Five different extracts were prepared using three methods; maceration, soxhlet and reflux. The extracts were analyzed using UV-Vis, HPLC and FTIR techniques. Analysis of selected primary and secondary metabolites was also evaluated. The antioxidant and cytotoxic activities of the extracts were evaluated. Chemometric tools were employed to classify the extracts based on HPLC analysis and FTIR fingerprints.

RESULTS

The ethanolic extract using maceration characterized high content of phenolics and flavonoids, (rosmarinic acid and eupatorin) with high antioxidant activity. Ethanolic (50%) and methanolic extracts using soxhlet showed high proteins and glycosaponins. Water extracts using reflux and maceration showed high polysaccharides. Methanolic extract (50%) using soxhlet and methanolic extract using maceration showed strong cytotoxic effect against MCF7 and HCT116 cell lines, respectively. Antioxidant and cytotoxic activities showed significant correlation with selected primary and secondary metabolites. HPLC fingerprints combined with chemometrics showed the extracts have been clustered based on selected major peaks profile. FTIR fingerprints combined with chemometrics showed that the extracts have been clustered based on protein and polysaccharide contents.

CONCLUSION

Ten different extracts of O. stamineus have showed significant differences in the content of selected primary and secondary metabolites as well as the biological activities. Chemometric tools were able to classify and discriminate the distinctive features of extracts thus can be correlated with the biological activities.

Data fusion methodologies for food and beverage authentication and quality assessment - a review

The ever increasing interest of consumers for safety, authenticity and quality of food commodities has driven the attention towards the analytical techniques used for analyzing these commodities. In recent years, rapid and reliable sensor, spectroscopic and chromatographic techniques have emerged that, together with multivariate and multiway chemometrics, have improved the whole control process by reducing the time of analysis and providing more informative results. In this progression of more and better information, the combination (fusion) of outputs of different instrumental techniques has emerged as a means for increasing the reliability of classification or prediction of foodstuff specifications as compared to using a single analytical technique. Although promising results have been obtained in food and beverage authentication and quality assessment, the combination of data from several techniques is not straightforward and represents an important challenge for chemometricians. This review provides a general overview of data fusion strategies that have been used in the field of food and beverage authentication and quality assessment.

A bio-inspired herbal tea flavour assessment technique

Herbal-based products are becoming a widespread production trend among manufacturers for the domestic and international markets. As the production increases to meet the market demand, it is very crucial for the manufacturer to ensure that their products have met specific criteria and fulfil the intended quality determined by the quality controller. One famous herbal-based product is herbal tea. This paper investigates bio-inspired flavour assessments in a data fusion framework involving an e-nose and e-tongue. The objectives are to attain good classification of different types and brands of herbal tea, classification of different flavour masking effects and finally classification of different concentrations of herbal tea. Two data fusion levels were employed in this research, low level data fusion and intermediate level data fusion. Four classification approaches; LDA, SVM, KNN and PNN were examined in search of the best classifier to achieve the research objectives. In order to evaluate the classifiers' performance, an error estimator based on k-fold cross validation and leave-one-out were applied. Classification based on GC-MS TIC data was also included as a comparison to the classification performance using fusion approaches. Generally, KNN outperformed the other classification techniques for the three flavour assessments in the low level data fusion and intermediate level data fusion. However, the classification results based on GC-MS TIC data are varied.

A hybrid sensing approach for pure and adulterated honey classification

This paper presents a comparison between data from single modality and fusion methods to classify Tualang honey as pure or adulterated using Linear Discriminant Analysis (LDA) and Principal Component Analysis (PCA) statistical classification approaches. Ten different brands of certified pure Tualang honey were obtained throughout peninsular Malaysia and Sumatera, Indonesia. Various concentrations of two types of sugar solution (beet and cane sugar) were used in this investigation to create honey samples of 20%, 40%, 60% and 80% adulteration concentrations. Honey data extracted from an electronic nose (e-nose) and Fourier Transform Infrared Spectroscopy (FTIR) were gathered, analyzed and compared based on fusion methods. Visual observation of classification plots revealed that the PCA approach able to distinct pure and adulterated honey samples better than the LDA technique. Overall, the validated classification results based on FTIR data (88.0%) gave higher classification accuracy than e-nose data (76.5%) using the LDA technique. Honey classification based on normalized low-level and intermediate-level FTIR and e-nose fusion data scored classification accuracies of 92.2% and 88.7%, respectively using the Stepwise LDA method. The results suggested that pure and adulterated honey samples were better classified using FTIR and e-nose fusion data than single modality data.

Comparison of pH Data Measured with a pH Sensor Array Using Different Data Fusion Methods

This paper introduces different data fusion methods which are used for an electrochemical measurement using a sensor array. In this study, we used ruthenium dioxide sensing membrane pH electrodes to form a sensor array. The sensor array was used for detecting the pH values of grape wine, generic cola drink and bottled base water. The measured pH data were used for data fusion methods to increase the reliability of the measured results, and we also compared the fusion results with other different data fusion methods.

Improved maturity and ripeness classifications of Magnifera Indica cv. Harumanis mangoes through sensor fusion of an electronic nose and acoustic sensor

In recent years, there have been a number of reported studies on the use of non-destructive techniques to evaluate and determine mango maturity and ripeness levels. However, most of these reported works were conducted using single-modality sensing systems, either using an electronic nose, acoustics or other non-destructive measurements. This paper presents the work on the classification of mangoes (Magnifera Indica cv. Harumanis) maturity and ripeness levels using fusion of the data of an electronic nose and an acoustic sensor. Three groups of samples each from two different harvesting times (week 7 and week 8) were evaluated by the e-nose and then followed by the acoustic sensor. Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA) were able to discriminate the mango harvested at week 7 and week 8 based solely on the aroma and volatile gases released from the mangoes. However, when six different groups of different maturity and ripeness levels were combined in one classification analysis, both PCA and LDA were unable to discriminate the age difference of the Harumanis mangoes. Instead of six different groups, only four were observed using the LDA, while PCA showed only two distinct groups. By applying a low level data fusion technique on the e-nose and acoustic data, the classification for maturity and ripeness levels using LDA was improved. However, no significant improvement was observed using PCA with data fusion technique. Further work using a hybrid LDA-Competitive Learning Neural Network was performed to validate the fusion technique and classify the samples. It was found that the LDA-CLNN was also improved significantly when data fusion was applied.

A biomimetic sensor for the classification of honeys of different floral origin and the detection of adulteration

The major compounds in honey are carbohydrates such as monosaccharides and disaccharides. The same compounds are found in cane-sugar concentrates. Unfortunately when sugar concentrate is added to honey, laboratory assessments are found to be ineffective in detecting this adulteration. Unlike tracing heavy metals in honey, sugar adulterated honey is much trickier and harder to detect, and traditionally it has been very challenging to come up with a suitable method to prove the presence of adulterants in honey products. This paper proposes a combination of array sensing and multi-modality sensor fusion that can effectively discriminate the samples not only based on the compounds present in the sample but also mimic the way humans perceive flavours and aromas. Conversely, analytical instruments are based on chemical separations which may alter the properties of the volatiles or flavours of a particular honey. The present work is focused on classifying 18 samples of different honeys, sugar syrups and adulterated samples using data fusion of electronic nose (e-nose) and electronic tongue (e-tongue) measurements. Each group of samples was evaluated separately by the e-nose and e-tongue. Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA) were able to separately discriminate monofloral honey from sugar syrup, and polyfloral honey from sugar and adulterated samples using the e-nose and e-tongue. The e-nose was observed to give better separation compared to e-tongue assessment, particularly when LDA was applied. However, when all samples were combined in one classification analysis, neither PCA nor LDA were able to discriminate between honeys of different floral origins, sugar syrup and adulterated samples. By applying a sensor fusion technique, the classification for the 18 different samples was improved. Significant improvement was observed using PCA, while LDA not only improved the discrimination but also gave better classification. An improvement in performance was also observed using a Probabilistic Neural Network classifier when the e-nose and e-tongue data were fused.

Electronic nose based on an optimized competition neural network

In view of the fact that there are disadvantages in that the class number must be determined in advance, the value of learning rates are hard to fix, etc., when using traditional competitive neural networks (CNNs) in electronic noses (E-noses), an optimized CNN method was presented. The optimized CNN was established on the basis of the optimum class number of samples according to the changes of the Davies and Bouldin (DB) value and it could increase, divide, or delete neurons in order to adjust the number of neurons automatically. Moreover, the learning rate changes according to the variety of training times of each sample. The traditional CNN and the optimized CNN were applied to five kinds of sorted vinegars with an E-nose. The results showed that optimized network structures could adjust the number of clusters dynamically and resulted in good classifications.