Potentiometric zinc ion sensor based on honeycomb-like NiO nanostructures

Picomolar level sensorial dual colorimetric gold nanoparticle sensor for Zn2+ and Hg2+ ions synthesized from bark extract of Lannea Grandis Coromandelica and its wide range applications in real sample analysis

In this work a facile, rapid, reproducible and non-toxic approach has been demonstrated for synthesis of most stable AuNPs from bark extract of Lannea Grandis Coromandelica. UV-Visible spectroscopy, FTIR, TEM, SAED, EDX, XRD, DLS, Zeta Potential, FE-SEM, AFM and XPS techniques were employed for the characterization of synthesized LGC-AuNPs. The UV-Vis spectra of LGC-AuNPs gave SPR peak at 536 nm while the TEM analysis revealed LGC-AuNPs have 20.75 nm size with spherical in shape. DLS study showed the AuNPs have average diameter 50.18 nm. The synthesized AuNPs exhibited very high selectivity, rapid response in recognition towards Zn2+ and Hg2+ ions by changing its color within 20 sec. This proposed sensor can detect very low picomolar level of Zn2+ and Hg2+ ions (LOD value for Zn2+ and Hg2+ were found 1.36 pM and 24.60 pM respectively). Here we also studied effect of several factors such as variation of conc of gold, temperature, incubation time, pH, salt, solvent (polar protic and polar aprotic) to know in which condition AuNPs have high stability and sensitivity. The data revealed that synthesized AuNPs was stable up to two years at pH 6.5 at room temperature in water media and under this condition, it shows maximum sensitivity and reactivity. Moreover, here interference study was carried out to identify high selectivity of synthesized LGC-AuNPs probe in presence of different metal ions. The real sample analyses also revealed the great applicability of this probe. Therefore, this simple, rapid, low-cost, sensing activity appeared to hold great sensibleness for detection of heavy metal ions in real sample.

New solid-state membrane and coated wire potentiometric sensors for the determination of Zn(II) ions based on nanoparticles

The first, novel solid-state membrane sensor for Zn(II) determination is developed based on ZnS nanoparticles. ZnS nanoparticles are synthesized by chemical co-precipitation and investigated via X-ray diffraction, transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) and impedance study. X-ray diffraction shows that the prepared ZnS nanoparticles have an average domain size of 5.72 nm, which is very close to the particle size obtained from TEM observations (6.30 nm). The ZnS nanoparticles are pressed into disks and examined as electroactive solid-state membrane. Solid-state membrane and coated wire sensors are fabricated. They display linear responses over concentration ranges of 1.0 × 10^-5 to 1.0 × 10^-1 mol L^-1 Zn²⁺ ions with cationic slopes of 28.9±0.2 and 25.9±0.2 mV decade^-1 for the solid-state membrane and coated wire sensors, respectively. The lower limits of detection are 2.86 × 10^-6 and 4.60 × 10^-6 mol L^-1 Zn²⁺ ions for the solid-state membrane and coated wire sensors, respectively. The response time for the two sensors is instantaneous (1 s), and the useful lifetimes for the solid-state membrane and coated wire sensors are long (10 and 6 months, respectively). The solid-state membrane sensor is utilized for the quantification of Zn(II) ions in brass alloys and pharmaceutical preparations.

Potential application of mixed metal oxide nanoparticle-embedded glassy carbon electrode as a selective 1,4-dioxane chemical sensor probe by an electrochemical approach

Here, low-dimensional mixed metal oxide (ZnO/NiO/MnO2) nanoparticles (NPs) were prepared to develop a selective, efficient and ultra-sensitive 1,4-dioxane sensor by using the wet-chemical method (co-precipitation) in alkaline medium at low temperature. Detailed characterization of the prepared calcined NPs was achieved via conventional methods, including X-ray diffraction, field emission scanning electron microscopy, and X-ray photoelectron, UV-vis, Fourier-transform infrared and energy dispersive X-ray spectroscopies. To develop a thin layer of nanomaterial on the fabricated electrode, a slurry of prepared NPs was used to coat the glassy carbon electrode (GCE) with conductive Nafion (5% in ethanol) binder. The fabricated electrochemical sensor showed good sensitivity (1.0417 μA μM-1 cm-2), a wide linear dynamic range (0.12 nM to 1.2 mM), lower detection limit (9.14 ± 4.55 pM), short response time, good reproducibility, and long-term stability to selectively detect 1,4-dioxane in the optimized buffer system. Thus, this work presents a reliable alternative approach over existing methods to selectively detect hazardous chemicals in large scale for safety in the environmental and healthcare fields.

A zinc selective oxytocin based biosensor

Oxytocin is a peptide hormone with high affinity to both Zn²⁺ and Cu²⁺ ions compared to other metal ions. This affinity makes oxytocin an attractive recognition layer for monitoring the levels of these essential ions in biofluids. Native oxytocin cannot differentiate between Cu²⁺ and Zn²⁺ ions and hence it is not useful for sensing Zn²⁺ in the presence of Cu²⁺. We elucidated the effect of the terminal amine group of oxytocin on the affinity toward Cu²⁺ using theoretical calculations. We designed a new Zn²⁺ selective oxytocin-based biosensor that utilizes the terminal amine for surface anchoring, also preventing the response to Cu²⁺. The biosensor shows exceptional selectivity and very high sensitivity to Zn²⁺ in impedimetric biosensing. This study shows for the first time an oxytocin derived sensor that can be used directly for sensing Zn²⁺ in the presence of Cu²⁺.

Effect of charge transfer and structural rigidity on divergent luminescence response of a metal organic framework towards different metal ions: luminescence lifetime decay experiments and DFT calculations

We have thoroughly studied the luminescence behaviour of a cadmium based MOF, [Cd(C12N2H8)(C7N1O4H3)] {C12N2H8 = 1,10-phenanthroline, C7N1O4H3 = 2,5-pyridine dicarboxylate}, 1. Both steady-state and time-resolved luminescence spectroscopic experiments were performed to understand the dissimilar responses of compound 1 towards different metal ions in aqueous medium. Upon excitation at 280 nm, compound 1 showed a luminescence spectrum centered at 365 nm, which exhibited a three-fold turn-on in the presence of a trace amount of Zn2+ in aqueous solution, whereas in the presence of Co2+, Hg2+, Ni2+, Fe2+ and Cu2+ the luminescence of compound 1 got largely quenched. Compound 1 did not show any response in the presence of other common metal ions such as K+, Mg2+, Na+, Mn2+, and Cr3+. By analysing all the experimental results, we successfully explained the versatile luminescence behaviour of compound 1. The turn-on of luminescence in the presence of Zn2+ ions was due to coordination bond formation and enhancement of the rigidity of compound 1 which resulted in the reduction of non-radiative decay processes to a large extent. The quenching of luminescence in the presence of transition metal ions was found to be static in nature, and was due to the possibility of ligand to metal charge transfer using the vacant d-orbital of the metal ions. In the case of Hg2+ which is a closed cell heavy metal ion, the quenching of luminescence was also static in nature and was due to a two-way charge transfer mechanism. We have also performed density functional theory calculations and obtained supportive results for the proposed mechanisms of luminescence turn-on and quenching. Moreover, compound 1 could be established as a selective and efficient sensor of Zn2+ in aqueous solution even in the presence of Cd2+ and other metal ions.

Detection of toxic choline based on Mn2O3/NiO nanomaterials by an electrochemical method

In this study, a novel in situ choline sensor was assembled by attaching the binary Mn₂O₃/NiO nanoparticles (NPs) onto a glassy carbon electrode (GCE). Initially, Mn₂O₃/NiO NPs were synthesized via a wet-chemical process and fully characterized via XRD, XPS, FESEM, EDS, FTIR and UV-Vis methods. The analytical performances of the choline sensor were evaluated by an electrochemical method in the phosphate buffer phase. The estimated linear dynamic range (LDR) was found to be 0.1 nM to 0.1 mM. The other analytical performances of the choline sensor, such as sensitivity (16.4557 μA μM⁻¹ cm⁻²) and detection limit (5.77 ± 0.29 pM), were also calculated very carefully from the calibration plot. Overall, the choline sensor exhibited a reliable reproducibility, in situ validity, selectivity, interference effect, stability, and intra-day and inter-day performances with high accuracy in a short response time. Moreover, the probe was successfully applied to detect choline in real human, mouse and rabbit serum. This fabrication route would be a novel approach for the detection of selective biochemical sensor in the healthcare and biomedical fields.

In this study, a novel in situ choline sensor was assembled by attached the binary Mn₂O₃/NiO nanoparticles onto glassy carbon electrode, which might be a reliable way to develop of future sensor in the field of biomedical and healthcare fields.

Biologically synthesized silver nanoparticle-based colorimetric sensor for the selective detection of Zn2+

Schematic illustration for the colorimetric detection of Zn²⁺.

Improvement in the performance of a zinc ion-selective potentiometric sensor using modified core/shell Fe3O4@SiO2nanoparticles

A novel, simple, accurate and sensitive zinc ion-selective potentiometric sensor was fabricated by modifying the surface of Fe₃O₄@SiO₂nanoparticles using a ligand prepared by a coupled reaction between APTMS and 2-H-3-MBA.

Metal oxide nanosensors using polymeric membranes, enzymes and antibody receptors as ion and molecular recognition elements

The concept of recognition and biofunctionality has attracted increasing interest in the fields of chemistry and material sciences. Advances in the field of nanotechnology for the synthesis of desired metal oxide nanostructures have provided a solid platform for the integration of nanoelectronic devices. These nanoelectronics-based devices have the ability to recognize molecular species of living organisms, and they have created the possibility for advanced chemical sensing functionalities with low limits of detection in the nanomolar range. In this review, various metal oxides, such as ZnO-, CuO-, and NiO-based nanosensors, are described using different methods (receptors) of functionalization for molecular and ion recognition. These functionalized metal oxide surfaces with a specific receptor involve either a complex formation between the receptor and the analyte or an electrostatic interaction during the chemical sensing of analytes. Metal oxide nanostructures are considered revolutionary nanomaterials that have a specific surface for the immobilization of biomolecules with much needed orientation, good conformation and enhanced biological activity which further improve the sensing properties of nanosensors. Metal oxide nanostructures are associated with certain unique optical, electrical and molecular characteristics in addition to unique functionalities and surface charge features which shows attractive platforms for interfacing biorecognition elements with effective transducing properties for signal amplification. There is a great opportunity in the near future for metal oxide nanostructure-based miniaturization and the development of engineering sensor devices.

Decoration of ZnO Nanorods with Coral Reefs like NiO Nanostructures by the Hydrothermal Growth Method and Their Luminescence Study

Composite nanostructures of coral reefs like p-type NiO/n-type ZnO were synthesized on fluorine-doped tin oxide glass substrates by hydrothermal growth. Structural characterization was performed by field emission scanning electron microscopy, high-resolution transmission electron microscopy, and X-ray diffraction techniques. This investigation shows that the adopted synthesis leads to high crystalline quality nanostructures. The morphological study shows that the coral reefs like nanostructures are densely packed on the ZnO nanorods. Cathodoluminescence (CL) spectra for the synthesized composite nanostructures are dominated mainly by a broad interstitial defect related luminescence centered at ~630 nm. Spatially resolved CL images reveal that the luminescence of the decorated ZnO nanostructures is enhanced by the presence of the NiO.

Interface chemistry engineering in electrode systems for electrochemical energy storage

In this review, we introduce two powerful strategies for well-controlled interface. Interface chemistry engineering in electrode systems for electrochemical energy storage needs to integrate individual materials components to interface design and optimization.