An Ultra-Low-Power RFID/NFC Frontend IC Using 0.18 μm CMOS Technology for Passive Tag Applications

A Self-Powered UHF Passive Tag for Biomedical Temperature Monitoring

Self-powered RF passive sensors have potential application in temperature measurements of patients with health problems. Herein, this work presents the design and implementation of a self-powered UHF passive tag prototype for biomedical temperature monitoring. The proposed battery-free sensor is composed of three basic building blocks: a high-frequency section, a micro-power management stage, and a temperature sensor. This passive temperature sensor uses an 860 MHz to 960 MHz RF carrier and a 1 W Effective Isotropic Radiated Power (EIRP) to harvest energy for its operation, showing a read range of 9.5 m with a 13.75 µW power consumption, and an overall power consumption efficiency of 10.92% was achieved. The proposed device can measure temperature variations between 0 °C and 60 °C with a sensitivity of 823.29 Hz/°C and a standard error of 13.67 Hz/°C over linear regression. Circuit functionality was validated by means of post-layout simulations, characterization, and measurements of the manufactured prototype. The chip prototype was fabricated using a 0.18 µm CMOS standard technology with a silicon area consumption of 1065 µm × 560 µm. The overall size of the self-powered passive tag is 8 cm × 2 cm, including both chip and antenna. The self-powered tag prototype could be employed for human body temperature monitoring.

Smartphone-Enabled Personalized Diagnostics: Current Status and Future Prospects

Smartphones are becoming increasingly versatile thanks to the wide variety of sensor and actuator systems packed in them. Mobile devices today go well beyond their original purpose as communication devices, and this enables important new applications, ranging from augmented reality to the Internet of Things. Personalized diagnostics is one of the areas where mobile devices can have the greatest impact. Hitherto, the camera and communication abilities of these devices have been barely exploited for point of care (POC) purposes. This short review covers the recent evolution of mobile devices in the area of POC diagnostics and puts forward some ideas that may facilitate the development of more advanced applications and devices in the area of personalized diagnostics. With this purpose, the potential exploitation of wireless power and actuation of sensors and biosensors using near field communication (NFC), the use of the screen as a light source for actuation and spectroscopic analysis, using the haptic module to enhance mass transport in micro volumes, and the use of magnetic sensors are discussed.

A CMOS Programmable Fourth-Order Butterworth Active-RC Low-Pass Filter

This paper presents a low-pass filter (LPF) for an ultra-high frequency (UHF) radio frequency identification (RFID) reader transmitter in standard SMIC 0.18 μm CMOS technology. The active-RC topology and Butterworth approximation function are employed mainly for high linearity and high flatness respectively. Two cascaded fully-differential Tow-Thomas biquads are chosen for low sensitivity to process errors and strong resistance to the imperfection of the involved two-stage fully-differential operational amplifiers. Besides, the LPF is programmable in order to adapt to the multiple data rate standards. Measurement results show that the LPF has the programmable bandwidths of 605/870/1020/1330/1530/2150 kHz, the optimum input 1dB compression point of −7.81 dBm, and the attenuation of 50 dB at 10 times cutoff frequency, with the overall power consumption of 12.6 mW from a single supply voltage of 1.8 V. The silicon area of the LPF core is 0.17 mm2.

Factors Affecting the Synthesis of Autonomous Sensors with RFID Interface

A general view on the problem of designing atypical battery-free, autonomous semi-passive RFID transponders-sensors (autonomous sensors with RFID interfaces) is presented in this review. Although RFID devices can be created in any of the electronic technologies, the design stage must be repeated each time when the manufacturing processes are changed, and their specific conditions have to be taken into consideration when modeling new solutions. Aspects related to the factors affecting the synthesis of semi-passive RFID transponder components on the basis of which the idea of the autonomous RFID sensor was developed are reflected in the paper. Besides their general characteristics, the operation conditions of modern RFID systems and achievements in autonomous RFID sensor technology are revealed in subsequent sections—they include such issues as technological aspects of the synthesis process, designing antennas for RFID transponders, determining RFID chip and antenna parameters, creating the interrogation zone IZ, etc. It should be pointed that the universal construction of an autonomous RFID sensor, which could be use in any application of the automatic object identification system, cannot be developed according to the current state of the art. Moreover, a trial and error method is the most commonly used in the today’s process of designing new solutions, and the basic parameters are estimated on the basis of the tests and the research team experience. Therefore, it is necessary to look for new inventions and methods in order to improve implementations of RFID systems.

Near-Field Communication Sensors

Near-field communication is a new kind of low-cost wireless communication technology developed in recent years, which brings great convenience to daily life activities such as medical care, food quality detection, and commerce. The integration of near-field communication devices and sensors exhibits great potential for these real-world applications by endowing sensors with new features of powerless and wireless signal transferring and conferring near field communication device with sensing function. In this review, we summarize recent progress in near field communication sensors, including the development of materials and device design and their applications in wearable personal healthcare devices. The opportunities and challenges in near-field communication sensors are discussed in the end.

Comparison and Feasibility of Various RFID Authentication Methods Using ECC

Radio frequency identification (RFID) is a technology that has grown in popularity and in the applications of use. However, there are major issues regarding security and privacy with respect to RFID technology which have caught the interest of many researchers. There are significant challenges which must be overcome to resolve RFID security and privacy issues. One reason is the constraints attached to the provision of security and privacy in RFID systems. Along with meeting the security and privacy needs of RFID technology, solutions must be inexpensive, practical, reliable, scalable, flexible, inter-organizational, and long-lasting. To make RFID identifiers effective and efficient they must identify the item(s) while resisting attacks aimed at obtaining the tag’s information and compromising the system or making it possible to bypass the protection RFID tags are supposed to provide. Different authentication methods have been proposed, researched, and evaluated in the literature. In this work, we proposed our methodology in evaluating RFID authentication, and a few of the most promising authentication methods are reviewed, compared, and ranked in order to arrive at a possible best choice of protocol to use.