Systematic Experimental Assessment of a 2D-Motion Sensor to Detect Relative Movement between Residual Limb and Prosthetic Socket

An Instrumented Printed Insert for Continuous Monitoring of Distal Limb Motion in Suction and Elevated Vacuum Sockets

A suction or elevated vacuum prosthetic socket that loses vacuum pressure may cause excessive limb motion, putting the user at risk of skin irritation, gait instability and injury. The purpose of this research was to develop a method to monitor distal limb motion and then test a small group of participants wearing suction sockets to identify variables that strongly influenced motion. A thin plastic insert holding two inductive sensor antennae was designed and printed. Inserts were placed in suction sockets made for four participants who regularly used suction or elevated vacuum suspension. Participants wore a liner with a trace amount of iron powder in the elastomer that served as a distance target for the sensors. In-lab testing demonstrated that the sensed distance increased when participants added socks and decreased when they removed socks, demonstrating proper sensor performance. Results from take-home testing (3–5 days) suggest that research investigation into cyclic limb motion for sock presence v. absence should be pursued, as should the influence of bodily position between bouts of walking. These variables may have an important influence on suspension. Long-term monitoring may provide clinical insight to improve fit and to enhance suction and elevated vacuum technology.

Lower limb prosthetic interfaces: Clinical and technological advancement and potential future direction

The human-prosthesis interface is one of the most complicated challenges facing the field of prosthetics, despite substantive investments in research and development by researchers and clinicians around the world. The journal of the International Society for Prosthetics and Orthotics, Prosthetics and Orthotics International, has contributed substantively to the growing body of knowledge on this topic. In celebrating the 50th anniversary of the International Society for Prosthetics and Orthotics, this narrative review aims to explore how human-prosthesis interfaces have changed over the last five decades; how research has contributed to an understanding of interface mechanics; how clinical practice has been informed as a result; and what might be potential future directions. Studies reporting on comparison, design, manufacturing and evaluation of lower limb prosthetic sockets, and osseointegration were considered. This review demonstrates that, over the last 50 years, clinical research has improved our understanding of socket designs and their effects; however, high-quality research is still needed. In particular, there have been advances in the development of volume and thermal control mechanisms with a few designs having the potential for clinical application. Similarly, advances in sensing technology, soft tissue quantification techniques, computing technology, and additive manufacturing are moving towards enabling automated, data-driven manufacturing of sockets. In people who are unable to use a prosthetic socket, osseointegration provides a functional solution not available 50 years ago. Furthermore, osseointegration has the potential to facilitate neuromuscular integration. Despite these advances, further improvement in mechanical features of implants, and infection control and prevention are needed.

Design Optimization in Lower Limb Prostheses: A Review

This paper aims to develop a knowledge base and identify the promising research pathways toward designing lower limb prostheses for optimal biomechanical and clinical outcomes. It is based on the literature search representing the state of the art in the lower limb prosthesis joint design and biomechanical analysis. Current design solutions are organized in terms of fulfilling four key functional roles: body support, propulsion, task flexibility, and loading relief. Biomechanical analyses of these designs reveal that the hypothesized outcomes are not consistently observed. We suggest that these outcomes may be improved by incorporating tools that can predict user performance metrics to optimize the device during the initial design process. We also note that the scope of the solution space of most current designs is limited by focusing on the anthropomorphic design approaches that do not account for the person's altered anatomy post-amputation. The effects of the prosthetic joint behavior on whole-body gait biomechanics and user experience are likewise under-explored. Two research paths to support the goal of better predicting the user outcomes are proposed: experimental parameterization of designs and model-based simulations. However, while work in these areas has introduced promising new possibilities, connecting both to improve real-world performance remains a challenge.

A Sensor Array for the Measurement of Relative Motion in Lower Limb Prosthetic Sockets

The relative motion between residual limb and prosthetic socket could be a relevant factor in quantifying socket fit. The measurement of these movements, particularly in dynamic gait situations, poses a challenging task. This paper presents the realization of a measurement concept based on multiple optical 2D-motion sensors. The performance of the system was evaluated on a test rig considering accuracy and precision as well as accomplished measurement frequency and reliability of the system. Additionally, results of a pilot study measuring the relative motion between residual limb and prosthetic socket at seven specific locations of one individual with transtibial amputation during straight level walking are presented. The sensor functionality of the array was confirmed and the test rig experiments were comparable to the previously tested functional model ( e r r rel = 0.52 ± 1.87 %). With a sampling frequency of 1.3 kHz to be distributed among the number of sensor units, the developed system is suitable for investigating the relative movement between residual limb and prosthetic socket in dynamic gait situations. Results of the pilot study show the majority of relative motion occurring during the second half of the gait cycle. The measured relative motions show the residual limb sinking deeper into the socket, extending in the Sagittal plane and rotating internally in the Transverse plane during stance phase. Data captured during swing phase indicate a lower limb extension in the Sagittal plane as well as an external rotation in the Transverse plane.