A Plasmonic Chip-Scale Refractive Index Sensor Design Based on Multiple Fano Resonances

Analogous plasmon-induced absorption based on an end-coupled MDM structure with area-cost-free cavities

We theoretically investigate an end-coupled metal-dielectric-metal (MDM) structure that achieves analogous plasmon-induced absorption (APIA) in an area-cost-free manner. First, a squared ring is set to end-couple with MDM input and output waveguides, generating three Lorentzian-like peaks in the spectrum. Then, two APIA windows as well as two Fano resonances can be induced via appropriately arranging two area-free cavities. Numerous numerical results demonstrate that the proposed structure has remarkable sensing and phase characteristics. Our proposed PIA-based MDM structure is promising in potential applications of bio-chemical sensing, slow light devices, optical switching, and chip-scale plasmonic devices.

Ultrawideband bandstop filter based on Fano resonance and rectangular resonators

In this study, the effect of length of the stub on the formation of the Fano resonance in structures which possess a metal-insulator-metal (MIM) waveguide coupled to rectangular cavities by the stub is investigated theoretically and numerically. The resulting Fano resonance is used to design an ultrawideband bandstop filter that can filter all wavelengths between two telecommunication windows of $\lambda = 850\;{\rm nm}$ and $\lambda = 1310\;{\rm nm}$. The structure is based on two rectangular cavities coupled to the MIM waveguide by stubs that are located at an adjusted distance from each other; the interference superposition of reflected and transmitted waves from each other will make this filtering phenomenon. The center wavelength of the bandstop of the structure is highly adjustable by changing the dimensions of the structure. The theoretical and the numerical results are, respectively, based on the transmission line model and the finite-difference time-domain method. The theoretical results comply well with the numerical ones. To analyze the Fano resonance, temporal coupled mode theory is also exploited. The proposed structure has significant applications in highly integrated optical circuits.

Microscopic Study on Excitation and Emission Enhancement by the Plasmon Mode on a Plasmonic Chip

Excitation and emission enhancement by using the plasmon mode formed on a plasmonic chip was studied with a microscope and micro-spectroscope. Surface plasmon resonance wavelengths were observed on one-dimensional (1D) and two-dimensional (2D) plasmonic chips by measuring reflection and transmission spectra, and they were assigned to the plasmon modes predicted by the theoretical resonance wavelengths. The excitation and emission enhancements were evaluated using the fluorescence intensity of yellow–green fluorescence particles. The 2D grating had plasmon modes of kgx45(2) (diagonal direction with m = 2) in addition to the fundamental mode of kgx(1) (direction of a square one side) in the visible range. In epifluorescence detection, the excitation enhancement factors of kgx(2) on the 1D and 2D chips were found to be 1.3–1.4, and the emission enhancement factor of kgx45(2) on the 2D chip was 1.5–1.8, although the emission enhancement was not found on the 1D chip. Moreover, enhancement factors for the other fluorophores were also studied. The emission enhancement factor of kgx(1) was shown to depend on the fluorescence quantum yield. The emission enhancement of 2D was 1.3-fold larger than that of 1D considering all azimuth components, and the 2D pattern was shown to be advantageous for bright fluorescence microscopic observation.

Independently tunable Fano resonances in a metal-insulator-metal coupled cavities system

Herein, multiple Fano resonances with excellent ability to be tuned independently are produced in a sub-wavelength metal-insulator-metal system. The input and output waveguides are separated by a metal gap, and a stub and an end-coupled cavity are placed below and to the right side of the input waveguide, respectively, as discrete states. Owing to the mode interferences, double ultra-sharp and asymmetric Fano resonant peaks are observed in the transmission spectrum. Successfully, the basic structure is extended by two extra rectangular cavities, giving rise to four Fano resonances with high refractive index sensitivity and figure of merit. Due to the discrete modes of Fano resonances from different coupling cavities, their resonant wavelengths can be controlled independently, which can provide greater flexibility for tuning Fano resonances. The performances of the proposed structure are investigated by both the finite-difference time-domain method and the multimode interference coupled-mode theory. It is believed that the research can provide important guidance in designing Fano resonance structures, and the proposed structure has a wide application in sensors, switches, and nano-photonic integrated circuit devices.

Plasmonic nanosensor based on multiple independently tunable Fano resonances

A novel refractive index nanosensor with compound structures is proposed in this paper. It consists of three different kinds of resonators and two stubs which are side-coupled to a metal-dielectric-metal (MDM) waveguide. By utilizing numerical investigation with the finite element method (FEM), the simulation results show that the transmission spectrum of the nanosensor has as many as five sharp Fano resonance peaks. Due to their different resonance mechanisms, each resonance peak can be independently tuned by adjusting the corresponding parameters of the structure. In addition, the sensitivity of the nanosensor is found to be up to 1900 nm/RIU. For practical application, a legitimate combination of various different components, such as T-shaped, ring, and split-ring cavities, has been proposed which dramatically reduces the nanosensor dimensions without sacrificing performance. These design concepts pave the way for the construction of compact on-chip plasmonic structures, which can be widely applied to nanosensors, optical splitters, filters, optical switches, nonlinear photonic and slow-light devices.

Tuning Multiple Fano Resonances for On-Chip Sensors in a Plasmonic System

This paper proposed a plasmonic resonator system, consisting of a metal-insulator-metal structure and two stubs, and a Fano resonance arose in its transmittance, which resulted from the coupling between the two stubs. On the basis of the proposed structure, a circle and a ring cavity are separately added above the stubs to create different coupled plasmonic structures, providing triple and quadruple Fano resonances, respectively. Additionally, by adjusting the geometric parameters of the system, multiple Fano Resonances obtained can be tuned. The proposed structure can be served as a high efficient refractive index sensor, yielding a sensitivity of 2000 nm/RIU and figure of merit (FOM) of 4.05×104 and performing better than most of the similar structures. It is believed that the proposed structure may support substantial applications for on-chip sensors, slow light and nonlinear devices in highly integrated photonic circuits.