1
|
Sarapukdee P, Schulz D, Palzer S. Grating Structures for Silver-Based Surface Plasmon Resonance Sensors with Adjustable Excitation Angle. SENSORS (BASEL, SWITZERLAND) 2024; 24:4538. [PMID: 39065935 PMCID: PMC11280483 DOI: 10.3390/s24144538] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/20/2024] [Revised: 07/09/2024] [Accepted: 07/11/2024] [Indexed: 07/28/2024]
Abstract
Silver-based grating structures offer means for implementing low-cost, efficient grating couplers for use in surface plasmon resonance (SPR) sensors. One-dimensional grating structures with a fixed periodicity are confined to operate effectively within a single planar orientation. However, two-dimensional grating structures as well as grating structures with variable periodicity allow for the plasmon excitation angle to be seamlessly adjusted. This study demonstrates silver-based grating designs that allow for the plasmon excitation angle to be adjusted via rotation or beam position. The flexible angle adjustment opens up the possibility of developing SPR sensor designs with an expanded dynamic range and increased flexibility in sensing applications. The results demonstrate that efficient coupling into two diffraction orders is possible, which ultimately leads to an excitation angle range from 16° to 40° by rotating a single structure. The findings suggest a promising direction for the development of versatile and adaptable SPR sensing platforms with enhanced performance characteristics.
Collapse
Affiliation(s)
| | | | - Stefan Palzer
- Department of Electrical Engineering and Information Technology, Technical University Dortmund, Friedrich-Wöhler-Weg 4, 44227 Dortmund, Germany; (P.S.)
| |
Collapse
|
2
|
Yadav PK, Kumar A, Upadhyay S, Kumar A, Srivastava A, Srivastava M, Srivastava SK. 2D material-based surface plasmon resonance biosensors for applications in different domains: an insight. Mikrochim Acta 2024; 191:373. [PMID: 38842697 DOI: 10.1007/s00604-024-06442-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/22/2024] [Accepted: 05/16/2024] [Indexed: 06/07/2024]
Abstract
The design of surface plasmon resonance (SPR) sensors has been greatly enhanced in recent years by the advancements in the production and integration of nanostructures, leading to more compact and efficient devices. There have been reports of novel SPR sensors having distinct nanostructures, either as signal amplification tags like gold nanoparticles (AuNPs) or as sensing substrate-like two-dimensional (2D) materials including graphene, transition metal dichalcogenides (TMDCs), MXene, black phosphorus (BP), metal-organic frameworks (MOFs), and antimonene. Such 2D-based SPR biosensors offer advantages over conventional sensors due to significant increases in their sensitivity with a good figure of merit and limit of detection (LOD). Due to their atomically thin structure, improved sensitivity, and sophisticated functionalization capabilities, 2D materials can open up new possibilities in the field of healthcare, particularly in point-of-care diagnostics, environmental and food monitoring, homeland security protection, clinical diagnosis and treatment, and flexible or transient bioelectronics. The present study articulates an in-depth analysis of the most recent developments in 2D material-based SPR sensor technology. Moreover, in-depth research of 2D materials, their integration with optoelectronic technology for a new sensing platform, and the predicted and experimental outcomes of various excitation approaches are highlighted, along with the principles of SPR biosensors. Furthermore, the review projects the potential prospects and future trends of these emerging materials-based SPR biosensors to advance in clinical diagnosis, healthcare biochemical, and biological applications.
Collapse
Affiliation(s)
- Prateek Kumar Yadav
- Department of Physics, Institute of Science, Banaras Hindu University, Varanasi, 221005, India
| | - Awadhesh Kumar
- Department of Physics, Institute of Science, Banaras Hindu University, Varanasi, 221005, India
| | - Satyam Upadhyay
- Department of Physics, Institute of Science, Banaras Hindu University, Varanasi, 221005, India
| | - Anil Kumar
- Department of Physics, Institute of Science, Banaras Hindu University, Varanasi, 221005, India
| | - Amit Srivastava
- Department of Physics TDPG College, VBS Purvanchal University, Jaunpur, 222001, India
| | - Monika Srivastava
- School of Materials Science and Technology, Indian Institute of Technology (Banaras Hindu University), Varanasi, India
| | - S K Srivastava
- Department of Physics, Institute of Science, Banaras Hindu University, Varanasi, 221005, India.
| |
Collapse
|
3
|
Laffont E, Valour A, Crespo-Monteiro N, Berini P, Jourlin Y. Performance of Grating Couplers Used in the Optical Switch Configuration. SENSORS (BASEL, SWITZERLAND) 2023; 23:9028. [PMID: 38005416 PMCID: PMC10675289 DOI: 10.3390/s23229028] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/09/2023] [Revised: 10/27/2023] [Accepted: 11/03/2023] [Indexed: 11/26/2023]
Abstract
Surface plasmon resonance is an effect widely used for biosensing. Biosensors based on this effect operate in different configurations, including the use of diffraction gratings as couplers. Gratings are highly tunable and are easy to integrate into a fluidic system due to their planar configuration. We discuss the optimization of plasmonic grating couplers for use in a specific sensor configuration based on the optical switch. These gratings present a sinusoidal profile with a high depth/period ratio. Their interaction with a p-polarized light beam results in two significant diffracted orders (the 0th and the -1st), which enable differential measurements cancelling noise due to common fluctuations. The gratings are fabricated by combining laser interference lithography with nanoimprinting in a process that is aligned with the challenges of low-cost mass production. The effects of different grating parameters such as the period, depth and profile are theoretically and experimentally investigated.
Collapse
Affiliation(s)
- Emilie Laffont
- School of Electrical Engineering and Computer Science, University of Ottawa, Ottawa, ON K1N 6N5, Canada;
- Department of Physics, University of Ottawa, Ottawa, ON K1N 6N5, Canada
- Université de Lyon, Laboratoire Hubert Curien, UMR CNRS 5516, 42000 Saint-Etienne, France; (A.V.); (N.C.-M.); (Y.J.)
| | - Arnaud Valour
- Université de Lyon, Laboratoire Hubert Curien, UMR CNRS 5516, 42000 Saint-Etienne, France; (A.V.); (N.C.-M.); (Y.J.)
| | - Nicolas Crespo-Monteiro
- Université de Lyon, Laboratoire Hubert Curien, UMR CNRS 5516, 42000 Saint-Etienne, France; (A.V.); (N.C.-M.); (Y.J.)
| | - Pierre Berini
- School of Electrical Engineering and Computer Science, University of Ottawa, Ottawa, ON K1N 6N5, Canada;
- Department of Physics, University of Ottawa, Ottawa, ON K1N 6N5, Canada
- Nexus for Quantum Technologies Institute, Advanced Research Complex, Ottawa, ON K1N 6N5, Canada
| | - Yves Jourlin
- Université de Lyon, Laboratoire Hubert Curien, UMR CNRS 5516, 42000 Saint-Etienne, France; (A.V.); (N.C.-M.); (Y.J.)
| |
Collapse
|
4
|
Bruhier H, Dutems J, Laffont E, Crespo-Monteiro N, Verrier I, Parriaux O, Berini P, Jourlin Y. Common-mode plasmon sensing scheme as a high-sensitivity compact SPR sensor. OPTICS LETTERS 2023; 48:3733-3736. [PMID: 37450737 DOI: 10.1364/ol.483692] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/19/2022] [Accepted: 06/05/2023] [Indexed: 07/18/2023]
Abstract
A deep metal grating enables quasi-phase-matched simultaneous excitation of two counterpropagating surface plasmon modes by means of its +1st and -2nd diffraction orders. The resulting angular reflection spectra of the scattered -1st and zeroth orders exhibit three interleaved zeros and maxima in a range centered around the Littrow angle. The spectra differ thoroughly from the usual reflection dip resulting from single-order plasmon coupling that produces strong absorption. The zeroth and -1st orders exhibit two crossing angles enabling high-sensitivity common-mode detection schemes designed to reject variations in source power and environmental noise. The proof of concept and experimental assessment of this new surface plasmon resonance (SPR) sensing scheme are demonstrated by monitoring gases in a pressure-controlled chamber. A limit of detection (LOD) of 2 × 10-7 refractive index unit (RIU) was achieved.
Collapse
|
5
|
de Araújo MM, da Silva JP. The Design of a Glycerol Concentration Sensor Based on an LRSPP Hybrid Photonic Biosensor. SENSORS (BASEL, SWITZERLAND) 2023; 23:2010. [PMID: 36850608 PMCID: PMC9967682 DOI: 10.3390/s23042010] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/21/2022] [Revised: 01/31/2023] [Accepted: 02/07/2023] [Indexed: 06/18/2023]
Abstract
A refractive index sensor based on an on-chip silicon nitride (Si3N4) ridge waveguide long-range surface plasmon polariton (LRSPP) is theoretically designed. The waveguide sensor consists of a gold film to enable the plasmonic resonance on top of a Cytop polymer layer. A proper finite element method was used to design and optimize the geometric parameters at the optical wavelength of 633 nm. In addition, the spectral performance was evaluated using the transfer matrix method from 580 to 680 nm. The redshifted interference spectrum results from an increasing analyte refractive index. The sensitivities of 6313 dB/cm/RIU and 251.82 nm/RIU can be obtained with a 400 nm wide and 25 nm thick Au layer. The proposed sensor has the potential for point-of-care applications considering its compactness and simplicity of construction.
Collapse
Affiliation(s)
- Magno M. de Araújo
- Electrotechnical Department, Federal Institute of Education, Science and Technology of Rio Grande do Norte, Mossoro 59628-330, Brazil
| | - José P. da Silva
- Post-Graduated Program in Electrical and Computer Engineering, Technology Center, Federal University of Rio Grande do Norte, Natal 59078-970, Brazil
| |
Collapse
|
6
|
Qayoom T, Najeeb-Ud-Din H. Comprehensive field pattern analysis for tailoring of reflectance in a hybrid subwavelength plasmonic grating refractive index sensor and its potential for noninvasive salivary glucose monitoring. APPLIED OPTICS 2022; 61:9429-9438. [PMID: 36606889 DOI: 10.1364/ao.474204] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/29/2022] [Accepted: 10/20/2022] [Indexed: 06/17/2023]
Abstract
A compact hybrid two-dimensional plasmonic subwavelength grating composed of gold and semiconductor ZnS is proposed. By implementing the finite-difference time-domain numerical technique, detailed field pattern analysis and reflectance characteristics of the grating structure are comprehensively investigated, tailored, and improved. An unfamiliar phenomenon of exponential decrease in resonance wavelength with an increase in groove width is observed, validated, and empirically modeled. This confirms that the reflectance resonance dip is because of the surface plasmon resonance in the grating structure, unlike the resonance dip obtained in the diffraction grating because of the Fabry-Perot resonance. A rigorous sensitivity analysis is performed for both generalized bulk and surface analyte detection. The surface sensitivity is observed to be 100.5 nm/RIU at dip 1 for 10-nm-surface analyte thickness. The bulk sensitivity for dip 1 and dip 2 was 104.3 nm/RIU and 800 nm/RIU, respectively. The refractive index range variation of dip 1 for the surface analyte is correlated with the refractive index of the blood by using the linear refractive index model and Gladstone-Dale law for blood. A linear regression analysis correlating blood glucose and salivary glucose with a surface analyte is used. The proposed sensor is observed to be promising for noninvasive salivary glucose monitoring with high surface sensitivity of 1.104 nm/mg/dl with a compact footprint of about 0.5µm×0.2µm in x-z dimensions.
Collapse
|
7
|
Chiu NF. The Current Status and Future Promise of SPR Biosensors. BIOSENSORS 2022; 12:933. [PMID: 36354442 PMCID: PMC9687760 DOI: 10.3390/bios12110933] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/20/2022] [Accepted: 10/25/2022] [Indexed: 06/16/2023]
Abstract
The most commonly used protein detection methods in clinical diagnosis and disease monitoring are enzyme-linked immunosorbent assay (ELISA), Western blotting (immunoblot), and lateral flow assay (LFA) rapid screening, of which ELISA is the gold standard immunoassay in clinical practice [...].
Collapse
Affiliation(s)
- Nan-Fu Chiu
- Laboratory of Nano-Photonics and Biosensors, Institute and Undergraduate of Electro-Optical Engineering, National Taiwan Normal University, Taipei 11677, Taiwan; ; Tel.: +886-2-77496722
- Department of Life Science, National Taiwan Normal University, Taipei 11677, Taiwan
| |
Collapse
|
8
|
Tharani S, Durgalakshmi D, Balakumar S, Rakkesh RA. Futuristic Advancements in Biomass‐Derived Graphene Nanoassemblies: Versatile Biosensors for Point‐of‐Care Devices. ChemistrySelect 2022. [DOI: 10.1002/slct.202203603] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- S. Tharani
- Department of Physics and Nanotechnology SRM Institute of Science and Technology Kattankulathur 603203 TN India
| | - D. Durgalakshmi
- Department of Medical Physics Anna University Chennai 600 025 TN India
- Department of Physics Ethiraj College for Women Chennai 600 008 TN India
| | - S. Balakumar
- National Centre for Nanoscience and Nanotechnology University of Madras Chennai 600 025 TN India
| | - R. Ajay Rakkesh
- Department of Physics and Nanotechnology SRM Institute of Science and Technology Kattankulathur 603203 TN India
| |
Collapse
|
9
|
Hua G, Cheng J, Chen J, Shen Y, Chang J, Ni H. Relative humidity sensor based on a silver nano-grating made from DVD discs. APPLIED OPTICS 2022; 61:9099-9106. [PMID: 36607041 DOI: 10.1364/ao.473159] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/12/2022] [Accepted: 09/30/2022] [Indexed: 06/17/2023]
Abstract
A relative humidity sensor based on a silver nano-grating was proposed. By stripping and cleaning commercially available CD and DVD discs, polycarbonate plates with different grating periods are obtained. These plates as templates are coated with a layer of sputtered silver film to form silver nano-gratings, which exhibit refractive index sensing sensitivities of 517 nm/RIU and 742.9 nm/RIU, respectively. The finite-difference time-domain simulation results conform the excited surface plasmon polariton modes and localized surface plasmon modes on the nano-grating. By spin coating a layer of humidity-sensitive porous silica with optimized thickness, the silver nano-grating shows a relative humidity detection sensitivity of 0.23 nm/%RH.
Collapse
|
10
|
Ultra-Sensitive Si-Based Optical Sensor for Nanoparticle-Size Traditional Water Pollutant Detection. PHOTONICS 2022. [DOI: 10.3390/photonics9050289] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
Abstract
A low-cost Si-based optical nano-sensor that monitors traditional water pollutants is introduced in this paper. The introduced sensor works in the near-infrared region, 900 nm to 2500 nm spectral range. The proposed structure consists of a Si layer with an optimized thickness of 300 nm on the top of the Al layer acting as a back reflector. On the top of the Si layer, the water pollutants are modeled as nanoparticle materials of different sizes. The finite difference time domain method is utilized to optimize the thicknesses of the Si layer by analyzing the optical light absorption considering different Si layer thicknesses and different pollutant nanoparticles’ sizes. Different interpolation techniques, including polynomials with various degrees and locally weighted smoothing quadratic regression, are used to find the best fitting model representing the simulated data points with goodness of fit analysis. Three features are proposed to identify the water pollutant with its size, peak absorption wavelength, relative amplitude, and a full width at half maximum. The device’s performance in detecting six different pollutants, silver, aluminum, copper, chromium, selenium, and ammonia, is evaluated. Sensitivity, a figure of merit, and a quality factor are used to evaluate the proposed sensor. The obtained maximum sensitivity is 11,300 nm/RIU, FOM of 740, and quality factor of 670.
Collapse
|
11
|
Numerical Study on a Bound State in the Continuum Assisted Plasmonic Refractive Index Sensor. PHOTONICS 2022. [DOI: 10.3390/photonics9040224] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Abstract
Plasmonic sensors have attracted intensive attention due to their high sensitivity. However, due to intrinsic metallic loss, plasmonic sensors usually have a large full width at half maximum (FWHM) that limits the wavelength resolution. In this paper, we numerically investigate and propose a dielectric grating-assisted plasmonic device, leveraging the bound states in the continuum (BIC) effect to suppress the FWHM of the resonance. We initiate quasi-SP-BIC modes at 1559 nm and 1905 nm wavelengths by slightly tilting the incident angle at 2° to break the symmetry, featuring a narrow linewidth of 1.8 nm and 0.18 nm at these two wavelengths, respectively. Refractive index sensing has also been investigated, showing high sensitivity of 938 nm/RIU and figure of merit (FOM) of 521/RIU at 1559 nm and even higher sensitivity of 1264 nm/RIU and FOM of 7022/RIU at 1905 nm.
Collapse
|
12
|
Chai Y, Li F, Wang J, Karvinen P, Kuittinen M, Kang G. Enhanced sensing performance from trapezoidal metallic gratings fabricated by laser interference lithography. OPTICS LETTERS 2022; 47:1009-1012. [PMID: 35167581 DOI: 10.1364/ol.450151] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/30/2021] [Accepted: 01/13/2022] [Indexed: 06/14/2023]
Abstract
Nanograting-based plasmonic sensors are widely regarded as promising platforms due to their real-time label-free detection and ease of integration. However, many reported grating structures are too complicated to fabricate, which limits their application. We propose a 1D bilayer metallic grating with trapezoidal profile as a near-infrared plasmonic sensor in the spectral interrogation. Trapezoidal gratings tend to perform better than rectangular gratings as sensors, particularly as they can detect at oblique incidence to obtain higher performance. Furthermore, we have successfully fabricated such a grating with a period of 633 nm over a 2.25 cm2 area using a two-step approach based on laser interference lithography. Glucose detection has been conducted to experimentally validate the sensing performance of the as-prepared grating. The measured sensitivity and figure-of-merit can reach up to 786 nm/RIU and 30, respectively. Our research sheds new light on the development of cost-effective sensing devices.
Collapse
|
13
|
Verma SK, Srivastava SK. Giant Extra-Ordinary Near Infrared Transmission from Seemingly Opaque Plasmonic Metasurface: Sensing Applications. PLASMONICS (NORWELL, MASS.) 2021; 17:653-663. [PMID: 34690613 PMCID: PMC8526055 DOI: 10.1007/s11468-021-01551-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/03/2021] [Accepted: 09/27/2021] [Indexed: 06/13/2023]
Abstract
In the present study, we report giant extra-ordinary transmission of near infrared (NIR) light, more than 90%, through a seemingly opaque plasmonic metasurface, which consists of two metal nano-slits arrays (MNSAs) with alternate opening arrangements. By using perfect coupling of the plasmonic modes formed between the sharp edges of the upper and lower MNSAs of silver, a giant, wavelength selective transmission could be obtained. The study is accompanied by optimization of electromagnetic (EM) field coupling for different interlayer spacings and lateral overlap between the two MNSAs to understand their significance in light transmission through the metasurface. The interlayer spacing between the MNSAs works as the transmitting channel for light. The optimization of performance with different fill factors and plasmonic metals was performed as well. Because of the excitation of extended surface plasmons (ESPs) generated at both the MNSAs, the metasurface can be used for refractive index (RI) sensing as one of its applications by using a transparent and flexible polymer, such as polydimethylsiloxane (PDMS), as substrate. The maximum sensitivity which could be achieved for the optimal configuration of the metasurface was 1435.71 nm/RIU, with a figure of merit (FOM) of 80 RIU-1 for 90.45% optical transmission of light for the refractive index variation of analyte medium from 1.33 to 1.38 RIU. The present study strengthens the concept of light funneling through subwavelength structures due to plasmons, which are responsible for light transmission through this seemingly opaque metasurface and finds use in highly sensitive, flexible, and cost-effective EOT-based sensors.
Collapse
Affiliation(s)
- Sagar Kumar Verma
- Department of Physics, Indian Institute of Technology Roorkee, Roorkee, Haridwar, Uttarakhand 247667 India
| | - Sachin K. Srivastava
- Department of Physics, Indian Institute of Technology Roorkee, Roorkee, Haridwar, Uttarakhand 247667 India
| |
Collapse
|
14
|
Urbancova P, Pudis D, Goraus M, Kovac J. IP-Dip-Based SPR Structure for Refractive Index Sensing of Liquid Analytes. NANOMATERIALS (BASEL, SWITZERLAND) 2021; 11:1163. [PMID: 33946890 PMCID: PMC8146640 DOI: 10.3390/nano11051163] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/04/2021] [Revised: 04/25/2021] [Accepted: 04/26/2021] [Indexed: 11/18/2022]
Abstract
In this paper, we present a two-dimensional surface plasmon resonance structure for refractive index sensing of liquid analytes. The polymer structure was designed with a period of 500 nm and prepared in a novel IP-Dip polymer by direct laser writing lithography based on a mechanism of two-photon absorption. The sample with a set of prepared IP-Dip structures was coated by 40 nm thin gold layer. The sample was encapsulated into a prototyped chip with inlet and outlet. The sensing properties were investigated by angular measurement using the prepared solutions of isopropyl alcohol in deionized water of different concentrations. Sensitivity of 478-617 nm per refractive index unit was achieved in angular arrangement at external angle of incidence of 20°.
Collapse
Affiliation(s)
- Petra Urbancova
- Department of Physics, Faculty of Electrical Engineering and Information Technology, University of Zilina, Univerzitna 1, 01026 Zilina, Slovakia; (D.P.); (M.G.)
| | - Dusan Pudis
- Department of Physics, Faculty of Electrical Engineering and Information Technology, University of Zilina, Univerzitna 1, 01026 Zilina, Slovakia; (D.P.); (M.G.)
| | - Matej Goraus
- Department of Physics, Faculty of Electrical Engineering and Information Technology, University of Zilina, Univerzitna 1, 01026 Zilina, Slovakia; (D.P.); (M.G.)
| | - Jaroslav Kovac
- Institute of Electronics and Photonics, Faculty of Electrical Engineering and Information Technology, Slovak University of Technology in Bratislava, Ilkovicova 3, 81219 Bratislava, Slovakia;
| |
Collapse
|
15
|
González-Colsa J, Serrera G, Saiz JM, González F, Moreno F, Albella P. On the performance of a tunable grating-based high sensitivity unidirectional plasmonic sensor. OPTICS EXPRESS 2021; 29:13733-13745. [PMID: 33985103 DOI: 10.1364/oe.422026] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/11/2021] [Accepted: 03/18/2021] [Indexed: 06/12/2023]
Abstract
Optical biosensing is currently an intensively active research area, with an increasing demand of highly selective, sensitivity-enhanced and low-cost devices where different plasmonic approaches have been developed. In this work we propose a tunable optimized grating-based gold metasurface that can act both as a high sensitivity sensor device (up to 1500 nm/RIU) and as an unidirectional plasmon source. The theory behind surface plasmon polariton generation is recalled to thoroughly understand the influence that every parameter of the grating source has on the performance of the proposed device. The results and conclusions discussed here offer a key step toward the design of biosensors based on excitation of surface plasmons polaritons by grating-based structures or in the process of creating new nanophotonic circuit devices.
Collapse
|
16
|
Nurrohman DT, Chiu NF. A Review of Graphene-Based Surface Plasmon Resonance and Surface-Enhanced Raman Scattering Biosensors: Current Status and Future Prospects. NANOMATERIALS (BASEL, SWITZERLAND) 2021; 11:216. [PMID: 33467669 PMCID: PMC7830205 DOI: 10.3390/nano11010216] [Citation(s) in RCA: 42] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/30/2020] [Revised: 01/07/2021] [Accepted: 01/12/2021] [Indexed: 12/12/2022]
Abstract
The surface plasmon resonance (SPR) biosensor has become a powerful analytical tool for investigating biomolecular interactions. There are several methods to excite surface plasmon, such as coupling with prisms, fiber optics, grating, nanoparticles, etc. The challenge in developing this type of biosensor is to increase its sensitivity. In relation to this, graphene is one of the materials that is widely studied because of its unique properties. In several studies, this material has been proven theoretically and experimentally to increase the sensitivity of SPR. This paper discusses the current development of a graphene-based SPR biosensor for various excitation methods. The discussion begins with a discussion regarding the properties of graphene in general and its use in biosensors. Simulation and experimental results of several excitation methods are presented. Furthermore, the discussion regarding the SPR biosensor is expanded by providing a review regarding graphene-based Surface-Enhanced Raman Scattering (SERS) biosensor to provide an overview of the development of materials in the biosensor in the future.
Collapse
Affiliation(s)
- Devi Taufiq Nurrohman
- Laboratory of Nano-Photonics and Biosensors, Institute of Electro-Optical Engineering, National Taiwan Normal University, Taipei 11677, Taiwan;
- Department of Electronics Engineering, State Polytechnic of Cilacap, Cilacap 53211, Indonesia
| | - Nan-Fu Chiu
- Laboratory of Nano-Photonics and Biosensors, Institute of Electro-Optical Engineering, National Taiwan Normal University, Taipei 11677, Taiwan;
- Department of Life Science, National Taiwan Normal University, Taipei 11677, Taiwan
| |
Collapse
|
17
|
Joseph S, Sarkar S, Joseph J. Grating-Coupled Surface Plasmon-Polariton Sensing at a Flat Metal-Analyte Interface in a Hybrid-Configuration. ACS APPLIED MATERIALS & INTERFACES 2020; 12:46519-46529. [PMID: 32962344 DOI: 10.1021/acsami.0c12525] [Citation(s) in RCA: 21] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/09/2023]
Abstract
Surface plasmon resonance-based sensors have emerged as commercially fostering portable biodetectors. The scientific community is engaged in extensive research to improve their performance in terms of sensitivity, selectivity, and reproducibility for the recognition of specific biomolecules. Essentially, there is a need for miniaturizing the size of existing sensors with innovative designs without compromising their bioaffinity and sensitivity performance. In this work, we propose and demonstrate a grating-coupled surface plasmon polariton (SPP) sensor on a thin flat gold layer using a hybrid configuration. The proof of concept of the grating architecture has been realized through an innovative fabrication procedure, with experimental verification of its bulk sensitivity. The geometry is identical to the prism-coupling configuration, yet with miniaturization and compactness. Characteristics of the excited modes in the spectral regime of interest are investigated using the finite-difference time-domain simulations. The effective index calculation of the resonance conditions and the accompanying field distribution can identify the excited SPP and metal-assisted guided-mode resonance modes. Detailed probing of the electric field distribution of the desired SPP mode reveals an extended evanescent decay length of 1284 nm, close to the theoretical limit, and an extended propagation length of 270 μm. The experimental demonstration of the reflectance dip with two different analyte media perceived an increased bulk sensitivity of 1133 nm/RIU. Remarkably, this resonant mode exhibits sensing capabilities for a wide range of analyte refractive indexes. We believe that the fabricated configuration with observed high sensitivity and calculated ultradeep evanescent field penetration depth along with extended propagation length can lead to the designing of a hands-on biochip for detecting large biomolecules.
Collapse
Affiliation(s)
- Shereena Joseph
- Photonics Research Lab, Department of Physics, Indian Institute of Technology Delhi, New Delhi 110016, India
| | - Swagato Sarkar
- Photonics Research Lab, Department of Physics, Indian Institute of Technology Delhi, New Delhi 110016, India
| | - Joby Joseph
- Photonics Research Lab, Department of Physics, Indian Institute of Technology Delhi, New Delhi 110016, India
| |
Collapse
|
18
|
An Ensemble Filter for Indoor Positioning in a Retail Store Using Bluetooth Low Energy Beacons. SENSORS 2019; 19:s19204550. [PMID: 31635097 PMCID: PMC6832989 DOI: 10.3390/s19204550] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/06/2019] [Revised: 10/09/2019] [Accepted: 10/18/2019] [Indexed: 11/19/2022]
Abstract
This paper has developed and deployed a Bluetooth Low Energy (BLE) beacon-based indoor positioning system in a two-floor retail store. The ultimate purpose of this study was to compare the different indoor positioning techniques towards achieving efficient position determination of moving customers in the retail store. The innovation of this research lies in its context (the retail store) and the fact that this is not a laboratory, controlled experiment. Retail stores are challenging environments with multiple sources of noise (e.g., shoppers’ moving) that impede indoor localization. To the best of the authors’ knowledge, this is the first work concerning indoor localization of consumers in a real retail store. This study proposes an ensemble filter with lower absolute mean and root mean squared errors than the random forest. Moreover, the localization error is approximately 2 m, while for the random forest, it is 2.5 m. In retail environments, even a 0.5 m deviation is significant because consumers may be positioned in front of different store shelves and, thus, different product categories. The more accurate the consumer localization, the more accurate and rich insights on the customers’ shopping behavior. Consequently, retailers can offer more effective customer location-based services (e.g., personalized offers) and, overall, better consumer localization can improve decision making in retailing.
Collapse
|
19
|
Sensitivity of Safe Trajectory in a Game Environment to Determine Inaccuracy of Radar Data in Autonomous Navigation. SENSORS 2019; 19:s19081816. [PMID: 30995777 PMCID: PMC6514738 DOI: 10.3390/s19081816] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/27/2019] [Revised: 04/09/2019] [Accepted: 04/15/2019] [Indexed: 01/03/2023]
Abstract
This article provides an analysis of the autonomous navigation of marine objects, such as ships, offshore vessels and unmanned vehicles, and an analysis of the accuracy of safe control in game conditions for the cooperation of objects during maneuvering decisions. A method for determining safe object strategies based on a cooperative multi-person positional modeling game is presented. The method was used to formulate a measure of the sensitivity of safe control in the form of a relative change in the payment of the final game; to determine the final deviation of the safe trajectory from the set trajectory of the autonomous vehicle movement; and to calculate the accuracy of information in terms of evaluating the state of the control process. The sensitivity of safe control was considered in terms of both the degree of the inaccuracy of radar information and changes in the kinematics and dynamics of the object itself. As a result of the simulation studies of the positional game algorithm, which used an example of a real situation at sea of passing one's own object with nine other encountered objects, the sensitivity characteristics of safe trajectories under conditions of both good and restricted visibility at sea are presented.
Collapse
|