Detection of Glaze Icing Load and Temperature of Composite Insulators Using Fiber Bragg Grating

Feature extraction and classification of surface discharges on an ice-covered insulator string during AC flashover using gray-level co-occurrence matrix

This study focuses on the feature extraction and classification of surface discharges of ice-covered insulator strings during process of alternating current flashover. The test specimen was the five units suspension ceramic insulators, which was artificially accreted with wet-grown ice in the cold-climate room of CIGELE. Based on the IEEE Standard 1783/2009, flashover experiments were conducted on iced insulators to measure the minimum flashover voltage (VMF) and record the propagating process of surface discharges to flashover by using a high-speed video camera. The gray-level co-occurrence matrix (GLCM) method has been used to extract four parameters of arc discharge images features that characterize different stages of flashover process. The parameters are angular second moment (ASM), contrast (CON), inverse difference moment (IDM) and entropy (ENT). These statistical parameters of GLCM can be extracted to reveal the underlying properties of ice flashover on the insulator surface from the quantitative perspective. The different values of these indicators are representative of the different stages in the process of arc discharge. Once the value of quantitative indicators (ASM, CON, IDM, ENT) of surface discharges exceeds the threshold value, the higher flashover risk of iced insulators will appear. Hence, the proposed methods are helpful to understand and monitor surface discharge on iced outdoor insulator strings for preventing flashover accidents.

Experimental Study on Glaze Icing Detection of 110 kV Composite Insulators Using Fiber Bragg Gratings

Icing detection of composite insulators is essential for the security and stability of power grids. As conventional methods have met difficulties in harsh weather, a 110 kV composite insulator with embedded Fiber Bragg Gratings (FBGs) was proposed for detecting glaze icing in this paper. FBG temperature compensation sensors in ceramic tubes were adopted for simultaneous measurement of icicle loads and temperature. Then, temperature calibration experiments and simulated icicle load experiments were carried out to obtain temperature and icicle load characteristics of FBGs. The results showed that temperature sensitivities of FBG strain sensors and FBG temperature compensation sensors were 18.16 pm/°C, and 13.18 pm/°C, respectively. Besides, wavelength shifts were linearly related to icicle loads within the polar angle range of -60° to 60°, and the load coefficient of FBG facing the icicle was -34.6 pm/N. In addition, the wavelength shift generated by several icicles was equal to the sum of wavelength shifts generated by each icicle within the polar angle range of -15° to 15°. Finally, icicles can cause wavelength shifts of FBGs within a big shed spacing. The paper provides a novel icing detection technology for composite insulators in transmission lines.