A Method for Energy Balance and Data Transmission Optimal Routing in Wireless Sensor Networks

Energy Aware Software Defined Network Model for Communication of Sensors Deployed in Precision Agriculture

A significant technological transformation has recently occurred in the agriculture sector. Precision agriculture is one among those transformations that largely focus on the acquisition of the sensor data, identifying the insights, and summarizing the information for better decision-making that would enhance the resource usage efficiency, crop yield, and substantial quality of the yield resulting in better profitability, and sustainability of agricultural output. For continuous crop monitoring, the farmlands are connected with various sensors that must be robust in data acquisition and processing. The legibility of such sensors is an exceptionally challenging task, which needs energy-efficient models for handling the lifetime of the sensors. In the current study, the energy-aware software-defined network for precisely selecting the cluster head for communication with the base station and the neighboring low-energy sensors. The cluster head is initially chosen according to energy consumption, data transmission consumption, proximity measures, and latency measures. In the subsequent rounds, the node indexes are updated to select the optimal cluster head. The cluster fitness is assessed in each round to retain the cluster in the subsequent rounds. The network model's performance is assessed against network lifetime, throughput, and network processing latency. The experimental findings presented here show that the model outperforms the alternatives presented in this study.

Research and Application of Energy-Efficient Management Approach for Wireless Sensor Networks

Wireless sensor networks (WSNs) are widely used in industrial applications. However, many of them have limited lifetimes, which has been a considerable constraint on their widespread use. As a typical application of WSNs, distributed measurement of the electric field under high-voltage direct-current (HVDC) transmission lines also suffers from this issue. This paper first introduces the composition of the electric-field measurement system (EFMS) and its working principle. Considering the actual power supply of the system, this paper mainly introduces the composition of the wireless sensor node (WSND) and analyzes the power consumption and potential working state transformation of the WSND, together with a comprehensive study on parameters affecting the power consumption of the wireless communication unit. Moreover, an energy-efficient scheduling approach is proposed after specially designing a working sequence and the study on system parameters. The proposed approach is verified by experiments on not only the experimental line of the national HVDC test base, but also a commercial operation HVDC transmission line with the challenge of long endurance, which is considered in this paper with a new strategy. The results show that the proposed method can greatly extend the lifetime of the WSND.

An efficient quality of services based wireless sensor network for anomaly detection using soft computing approaches

Wireless sensor network (WSN) is widely acceptable communication network where human-intervention is less. Another prominent factors are cheap in cost and covers huge area of field for communication. WSN as name suggests sensor nodes are present which communicate to the neighboring node to form a network. These nodes are communicate via radio signals and equipped with battery which is one of most challenge in these networks. The battery consumption is depend on weather where sensors are deployed, routing protocols etc. To reduce the battery at routing level various quality of services (QoS) parameters are available to measure the performance of the network. To overcome this problem, many routing protocol has been proposed. In this paper, we considered two energy efficient protocols i.e. LEACH and Sub-cluster LEACH protocols. For provision of better performance of network Levenberg-Marquardt neural network (LMNN) and Moth-Flame optimisation both are implemented one by one. QoS parameters considered to measure the performance are energy efficiency, end-to-end delay, Throughput and Packet delivery ratio (PDR). After implementation, simulation results show that Sub-cluster LEACH with MFO is outperforms among other algorithms.Along with this, second part of paper considered to anomaly detection based on machine learning algorithms such as SVM, KNN and LR. NSLKDD dataset is considered and than proposed the anomaly detection method.Simulation results shows that proposed method with SVM provide better results among others.

Sensor-System-Based Network with Low-Power Communication Using Multi-Hop Routing Protocol Integrated with a Data Transmission Model

Wireless sensor networks (WSNs) comprise several cooperating sensor nodes capable of sensing, computing, and transmitting sensed signals to a central server. This research proposes a sensor system-based network with low power communication using swarm intelligence integrated with multi-hop communication (SIMHC). This routing protocol selects the optimal route based on link distance, transmission power, and residual energy to optimize the network lifetime and node energy efficiency. Moreover, adaptive clustering-based locative data transmission (ACLDT) is applied for optimizing data transmission. The proposed approach combines clustering with data transfer via location-based routing and low-power communication in two phases to calculate the ideal cluster heads (CHs). First, a CH seeks the next hop from the nearest CH. Then, a path to the base station is formed by developing CH chains. The results reveal that the proposed sensor system based on data transmission and low-power consumption achieved a network lifetime of 96%, an average delay of 53 ms, a coverage rate (CR) of 83%, a throughput of 97%, and energy efficiency of 95%.

Towards Hybrid Energy-Efficient Power Management in Wireless Sensor Networks

Wireless Sensor Networks (WSNs) are prone to highly constrained resources, as a result ensuring the proper functioning of the network is a requirement. Therefore, an effective WSN management system has to be integrated for the network efficiency. Our objective is to model, design, and propose a homogeneous WSN hybrid architecture. This work features a dedicated power utilization optimization strategy specifically for WSNs application. It is entitled Hybrid Energy-Efficient Power manager Scheduling (HEEPS). The pillars of this strategy are based on the one hand on time-out Dynamic Power Management (DPM) Intertask and on the other hand on Dynamic Voltage and Frequency Scaling (DVFS). All tasks are scheduled under Global Earliest Deadline First (GEDF) with new scheduling tests to overcome the Dhall effect. To minimize the energy consumption, the HEEPS predicts, defines and models the behavior adapted to each sensor node, as well as the associated energy management mechanism. HEEPS’s performance evaluation and analysis are performed using the STORM simulator. A comparison to the results obtained with the various state of the art approaches is presented. Results show that the power manager proposed effectively schedules tasks to use dynamically the available energy estimated gain up to 50%.

Energy Efficient Routing Protocol in Sensor Networks Using Genetic Algorithm

In this paper, we examine routing protocols with the shortest path in sensor networks. In doing this, we propose a genetic algorithm (GA)-based Ad Hoc On-Demand Multipath Distance Vector routing protocol (GA-AOMDV). We utilize a fitness function that optimizes routes based on the energy consumption in their nodes. We compare this algorithm with other existing ad hoc routing protocols including LEACH-GA, GA-AODV, AODV, DSR, EPAR, EBAR_BFS. Results prove that our protocol enhances the network performance in terms of packet delivery ratio, throughput, round trip time and energy consumption. GA-AOMDV protocol achieves average gain that is 7 to 22% over other protocols. Therefore, our protocol extends the network lifetime for data communications.

A Method to Increase the Frequency Stability of a TCXO by Compensating Thermal Hysteresis

Due to the rapid growth of electronic information technology, the need for the higher stability of crystal oscillators has increased. The temperature-compensated X'tal (crystal) oscillator (TCXO), a type of crystal oscillator with high frequency stability, has been widely used in communications, sensor networks, automotive electronics, industrial control, measuring devices, and other equipment. The traditional TCXO only performs frequency compensation based on the current temperature, without considering the error caused by thermal hysteresis. As the frequency stability of the TCXO improves, the thermal hysteresis of the crystal oscillator has a negligible influence on the frequency stability of the crystal oscillator. This study measured different compensation tables for hysteresis curves at different temperatures and used a microprocessor to store the historical information of crystal temperature changes. Furthermore, corresponding algorithms were designed to select the correct values, according to the temperature change history, to compensate for the thermal hysteresis of the crystal oscillator error. Experiments show that this method can reduce the hysteresis error of the crystal oscillator from 700 to 150 ppb (-40 to 80 °C).

Energy-Efficient and Fast MAC Protocol in UAV-Aided Wireless Sensor Networks for Time-Critical Applications

Unmanned aerial vehicle (UAV)-aided wireless sensor networks (UWSNs) can be effectively used for time-critical sensing applications. UAVs can be used to collect the sensed data from sensors and transfer them to a base station. The real-time transfer of data is highly desired in the time-critical applications. However, the medium access control (MAC) protocols designed for UWSNs so far are primarily focused on the efficient use of UAVs to collect data in the sensing areas. In this paper, we propose an energy-efficient and fast MAC (EF-MAC) protocol in UWSNs for time-critical sensing applications. EF-MAC adopts carrier sense multiple access (CSMA) for the registration of sensor nodes with a UAV and time division multiple access (TDMA) with variable slot time for the transmission of collected data. The UAV is equipped with two transceivers to minimize both energy consumption and delay in air-to-ground communication. The energy consumption and delay are formally analyzed and the performance of EF-MAC is evaluated via extensive simulation. The simulation results show that the proposed EF-MAC outperforms the conventional MAC protocols in terms of energy efficiency and communication delay.

Minimizing the Energy Hole Problem in Wireless Sensor Networks: A Wedge Merging Approach

The Energy hole problem, a common phenomenon in wireless sensor networks, significantly decreases the lifetime of any deployed network. Some of the popular techniques to minimize such problems are using mobile sinks instead of static sinks, extending the transmission range dynamically, and deploying redundant sensor nodes near the base station/sink. The major drawback to these techniques are that energy holes may still be created at some point due to their static nature of deployment, despite having the overall residual energy very high. In this research work, we adopt a new approach by dividing the whole network into equiangular wedges and merging a wedge with its neighboring wedge dynamically whenever individual residual energy of all member nodes of a wedge fall below a threshold value. We also propose an efficient Head Node (HN) selection scheme to reduce the transmission energy needed for forwarding data packets among Head Nodes. Simulation results show that WEMER, our proposed WEdge MERging based scheme, provides significantly higher lifetime and better energy efficiency compared to state-of-the-art Power-Efficient Gathering in Sensor Information Systems (PEGASIS) and contemporary Concentric Clustering Scheme (CCS), and Multilayer Cluster Designing Algorithm (MCDA).

Modified Echo State Network Enabled Dynamic Duty Cycle for Optimal Opportunistic Routing in EH-WSNs

Minimizing energy consumption is one of the major challenges in wireless sensor networks (WSNs) due to the limited size of batteries and the resource constrained tiny sensor nodes. Energy harvesting in wireless sensor networks (EH-WSNs) is one of the promising solutions to minimize the energy consumption in wireless sensor networks for prolonging the overall network lifetime. However, static energy harvesting in individual sensor nodes is normally limited and unbalanced among the network nodes. In this context, this paper proposes a modified echo state network (MESN) based dynamic duty cycle with optimal opportunistic routing (OOR) for EH-WSNs. The proposed model is used to act as a predictor for finding the expected energy consumption of the next slot in dynamic duty cycle. The model has adapted a whale optimization algorithm (WOA) for optimally selecting the weights of the neurons in the reservoir layer of the echo state network towards minimizing energy consumption at each node as well as at the network level. The adapted WOA enabled energy harvesting model provides stable output from the MESN relying on optimal weight selection in the reservoir layer. The dynamic duty cycle is updated based on energy consumption and optimal threshold energy for transmission and reception at bit level. The proposed OOR scheme uses multiple energy centric parameters for selecting the relay set oriented forwarding paths for each neighbor nodes. The performance analysis of the proposed model in realistic environments attests the benefits in terms of energy centric metrics such as energy consumption, network lifetime, delay, packet delivery ratio and throughput as compared to the state-of-the-art-techniques.

Extending the Battery Life of the ZigBee Routers and Coordinator by Modifying Their Mode of Operation

Wireless sensor networks proliferate more and more in all social scopes and sectors. Such networks are implemented in smart homes, smart cities, security systems, medical resources, agriculture, automotive industry, etc. Communication devices and sensors of such networks are powered with batteries: the enlarging of battery life is a hot research topic. We focus on wireless sensor networks based on ZigBee technology. While sleep standard operation mode is defined for end devices, it is not the case for the rest of devices (routers and Coordinator), which usually always remain in active mode. We designed a formal optimization model for maximizing the enlarging of the battery life of routers and Coordinator, allowing us to delimit practical successful conditions. It was successfully tested with a standard ZigBee datasheet comprising technical data for sensors, routers, and coordinators. It was tested in a practical wireless sensor network assembly with XBee S2C devices. We derived, from the previous model, a novel but simple protocol of communication among routers and coordinators. It was tested in different use cases. We showed that when end devices generate traffic at regular intervals, the enlarging of the battery life of routers and Coordinator was possible only under certain use cases.