Ultra-Sensitive Fiber Refractive Index Sensor with Intensity Modulation and Self-Temperature Compensation

Curcuma longa-Based Optical Sensor for Hydrochloric Acid and Ammonia Vapor Detection

In this research, we present a prototype optical system that offers significant advances in detecting hydrochloric acid (HCl) and ammonia (NH3) vapors. The system utilizes a natural pigment sensor based on Curcuma longa that is securely attached to a glass surface support. Through extensive development and testing with HCl (37% aqueous solution) and NH3 (29% aqueous solution) solutions, we have successfully demonstrated the effectiveness of our sensor. To facilitate the detection process, we have developed an injection system that exposes C. longa pigment films to the targeted vapors. The interaction between the vapors and the pigment films triggers a distinct color change, which is then analyzed by the detection system. By capturing the transmission spectra of the pigment film, our system allows a precise comparison of these spectra at different concentrations of the vapors. Our proposed sensor exhibits remarkable sensitivity, allowing the detection of HCl at a concentration of 0.009 ppm using only 100 µL (2.3 mg) of pigment film. In addition, it can detect NH3 at a concentration of 0.03 ppm with a 400 µL (9.2 mg) pigment film. Integrating C. longa as a natural pigment sensor in an optical system opens up new possibilities for detecting hazardous gases. The simplicity and efficiency of our system, combined with its sensitivity, make it an attractive tool in environmental monitoring and industrial safety applications.

PLC-Based Integrated Refractive Index Sensor Probe with Partially Exposed Waveguide

This paper proposes a simple, high-efficiency refractive index (RI) sensor, with a structure based on the planar lightwave circuit (PLC) probe type. The optical sensor has a 1 × 2 splitter structure with reference and sensing channels, each consisting of a U-shaped waveguide structure that is configured by connecting C bends. This design allows for the sensor device to have a probe structure wherein the surface interconnected with activity devices (i.e., an optical source and optical detector) is placed on one side. The reference channel is bent with a minimum optical loss, and the sensing channel has a bent structure, involving a C-bend waveguide with a maximum loss. The C-bend waveguide with a maximum loss is conformally aligned to have a trench structure with the same bending radius, designed to selectively expose the sidewall of the core layer. The local index contrast varies depending on the material in contact with the trench, resulting in a change in the optical output power of the waveguide. The sensitivity of the proposed sensor was 0 and 2070 μW/refractive index unit (RIU) for the reference and sensing channels, respectively, as the RI changed from 1.385 to 1.445 at a 1550 nm wavelength. These results suggest that the proposed structure enables efficient RI measurement through the use of a simple dip-type method.

Tapered-open-cavity-based in-line Mach-Zehnder interferometer for highly sensitive axial-strain measurement

An in-line Mach-Zehnder interferometer based on a multimode-fiber-assisted tapered open-cavity (TOC) is proposed. Light field distributions of the TOC were investigated using beam propagation method with different offsets and diameters of the taper waist. Bias and uniform taper (BT and UT)-based structures were fabricated and compared using one- and two-step arc-discharge methods, and comprehensive tests were then conducted considering axial-strain. The experimental results show that the UT structure has more than -45 pm/µɛ linear wavelength shift with the applied axial-strain. Owing to its compact size and low cost, the proposed sensor is promising for axial-strain-related high-precision engineering applications.

Polymer Microtip on a Multimode Optical Fiber as a Threshold Volatile Organic Compounds Sensor

Polymer microtips are 3D microstructures manufactured on the end face of an optical fiber by using the photopolymerization process. Such micro-optic elements made on a multi-mode optical fiber were previously tested as a transducer of refractive index sensor. These studies were an inspiration to investigate the possibility of using this type of transducer to measure the presence of volatile organic compounds in the air. The experimental results of microtips polymerized with UV and VIS were reported. It was possible to detect the presence of five different volatile compounds in the air due to the sensitivity of the transducer to the refractive indices changes. These changes were induced by the vapors condensed on the microtip surface. The measured time responses have shown that the return loss decreases rapidly as the microtip is inserted inside a glass vial filled with the tested compound. Moreover, correlations between calculated dynamic ranges and refractive indices and volumes of the volatile compounds inside the vials were negligible. Therefore, this type of sensor can be categorized as a condensed material threshold sensor. This sensor can be used in warning systems for monitoring leakages of pipelines carrying volatile chemicals.

Reflective Properties of a Polymer Micro-Transducer for an Optical Fiber Refractive Index Sensor

A polymer microtip manufactured at the end of a multi-mode optical fiber by using the photopolymerization process offers good reflective properties, therefore, it is applicable as an optical fiber sensor micro-transducer. The reflective properties of this microelement depend on the monomer mixture used, optical fiber type, and light source initiating polymerization. Experimental results have shown that a proper selection of these parameters has allowed the design of a new class of sensing structure which is sensitive to the refractive index (RI) changes of a liquid medium surrounding the microtip. An optical backscatter reflectometer was applied to test a group of micro-transducers. They were manufactured from two monomer mixtures on three different types of multi-mode optical fibers. They were polymerized by means of three optical light sources. Selected micro-transducers with optimal geometries were immersed in reference liquids with a known RI within the range of 1.3-1.7. For a few sensors, the linear dependences of return loss and RI have been found. The highest sensitivity was of around 208 dB/RIU with dynamic 32 dB within the range of 1.35-1.48. Sensing characteristics have minima close to RI of a polymer microelement, therefore, changing its RI can give the possibility to tune sensing properties of this type of sensor.