An Optical Fiber Chemical Sensor for the Detection of Copper(II) in Drinking Water

Experimental and DFT study of Cu(II) removed by Na-montmorillonite

The experimental and theoretical studies on the adsorption of Cu(II) on the surface of Na-montmorillonite (Na-Mt) were reported. Effects of batch adsorption experimental parameters were studied. Density functional theory and molecular dynamics simulations were used to study the adsorption of Cu(II) on montmorillonite (001) surface. The adsorption reached equilibrium within 80 min and the adsorption capacity was 35.23 mg·g^-1 at 25 °C. The adsorption data of Cu(II) were consistent with pseudo-second-order kinetics and Langmuir isotherm models. The adsorption process was dominated by physical adsorption (E_a was 37.08 kJ·mol^-1) with spontaneous endothermic behavior. The influence of coexisting cations on the adsorption capacity of Cu(II) was Mg(II) > Co(II) > Ca(II) > Na(I). The simulation results demonstrated that there were no significant differences in the adsorption energy of Cu(II) at the four adsorption sites on the montmorillonite (001) surface. Cu(II) had more electron transfer than Na(I). The diffusion coefficient of Cu(II) in the aqueous solution system containing montmorillonite was 0.85×10^-10 m²·s^-1. Considerable amounts of Cu(II) ions were adsorbed at a distance of 0.26 and 2.25 Å from the montmorillonite (001) surface. The simulation results provided strong supporting evidence for experimental conclusions.

Cu2+-imprinted optical fiber SPR sensor for intelligent recognition

An optical fiber surface plasma resonance (SPR) sensor with MMF-TCF-MMF structure was designed to realize intelligent recognition of copper ions (Cu²⁺), and the selective adsorption sensitization was achieved by plating a layer of Cu²⁺-imprinted film on the surface of gold film excitation layer. Combining the principle of optical fiber interference and SPR, the proposed sensor realized the detection of the copper ions concentration through measuring the refractive index changes caused by ions adsorption on imprinted film. The Cu²⁺-imprinted optical fiber SPR sensor can realize the intelligent recognition and detection of copper ions in the complex environment and exhibits a detection sensitivity of -10.05 pm/ppm. The proposed sensor has tremendous development potential in practical application, and provides new ideas for the field of metal ions detection.

A New Sensing Material Based on Tetraaza/SBA15 for Rapid Detection of Copper(II) Ion in Water

A novel rapid and sensitive optical sensor for Cu2+ ion detection based on 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradeca-7,14-dienium dibromide (TL) immobilized on Santa Barbara Amorphous (SBA-15) has been successfully developed. The inner and outer space of SBA15 allowed a high capacity of TL compound to immobilize onto it. FESEM (Field Emission Scanning Electron Microscopy) analysis was performed to confirm the morphology of TL-SBA15, while FTIR (Fourier Transform Infrared Spectroscopy) was utilized to confirm the interaction of TL−SBA15. A binding study of TL compound towards Cu2+ ion was performed via UV-vis solution study and binding titration. The stoichiometric binding ratio and binding constant value Kb of TL towards Cu2+ ion was 1:1 and 2.33 × 103 M−1, respectively. The optical reflectance sensor based on the TL compound is selective to Cu2+ ion and demonstrated a linear response over a Cu2+ ion concentration range of 1 × 10−7 M to 2 × 10−5 M, with a detection limit (LOD) of 1.02 × 10−7 M (R2 = 0.99) and fast response time of < 1 min. It showed high reproducibility, with a relative standard deviation (RSD) obtained at 0.47%. This optical sensor is reusable up to five consecutive times on Cu2+ ion by using 0.1 M EDTA with a pH of 6 as a regeneration solution, with a reversibility RSD value of 0.79%. The developed optical sensor provides a rapid and sensitive tool for Cu2+ ion detection in teabag samples, and the results align with those obtained by the ICP-MS standard method.

Novel Optical Fiber-Based Structures for Plasmonics Sensors

Optical fiber sensors based on surface plasma technology have many unique advantages in specific applications such as extreme environmental monitoring, physical parameter determination, and biomedical indicators testing. In recent decades, various kinds of fiber probes with special structures were developed according to special processing such as tapering, splicing, etching, fiber balls, grating etc. In this paper, the fabrication technology, characteristics, development status and application scenarios of different special optical fiber structures are briefly reviewed, including common processing equipment. Furthermore, many special novel optical fiber structures reported in recent years are summarized, which have been used in various kinds of plasmonic sensing work. Then, the fiber-plasmonic sensors for practical applications are also introduced and examined in detail. The main aim of this review is to provide guidance and inspiration for researchers to design and fabricate special optical fiber structures, thus facilitating their further research.

An Optical Fiber Sensor for Uranium Detection in Water

An optical sensor for uranyl has been prepared based on a gold-plated D-shaped plastic optical fiber (POF) combined with a receptor consisting of a bifunctional synthetic molecule, 11-mercaptoundecylphosphonic acid (MUPA), with a phosphonic group for complexing the considered ion, and a sulfide moiety through which the molecule is fixed at the gold resonant surface as a molecular layer in an easy and reproducible way. The sensor is characterized by evaluating the response in function of the uranyl concentration in aqueous solutions of different compositions and real-life samples, such as tap water and seawater. The mechanism of the uranyl/MUPA interaction was investigated. Two different kinds of interactions of uranyl with the MUPA layer on gold from water are observed: a strong one and a weak one. In the presence of competing metal ions as Ca²⁺ and Mg²⁺, only the strong interaction takes place, with a high affinity constant (around 10⁷ M⁻¹), while a somewhat lower constant (i.e., around 10⁶ M⁻¹) is obtained in the presence of Mg²⁺ which forms stronger complexes with MUPA than Ca²⁺. Due to the high affinity and the good selectivity of the recognition element MUPA, a detection limit of a few μg L⁻¹ is reached directly in natural water samples without any time-consuming sample pretreatment, making it possible for rapid, in situ controls of uranyl by the proposed sensor.

Cost-Effective Fiber Optic Solutions for Biosensing

In the last years, optical fiber sensors have proven to be a reliable and versatile biosensing tool. Optical fiber biosensors (OFBs) are analytical devices that use optical fibers as transducers, with the advantages of being easily coated and biofunctionalized, allowing the monitorization of all functionalization and detection in real-time, as well as being small in size and geometrically flexible, thus allowing device miniaturization and portability for point-of-care (POC) testing. Knowing the potential of such biosensing tools, this paper reviews the reported OFBs which are, at the moment, the most cost-effective. Different fiber configurations are highlighted, namely, end-face reflected, unclad, D- and U-shaped, tips, ball resonators, tapered, light-diffusing, and specialty fibers. Packaging techniques to enhance OFBs' application in the medical field, namely for implementing in subcutaneous, percutaneous, and endoscopic operations as well as in wearable structures, are presented and discussed. Interrogation approaches of OFBs using smartphones' hardware are a great way to obtain cost-effective sensing approaches. In this review paper, different architectures of such interrogation methods and their respective applications are presented. Finally, the application of OFBs in monitoring three crucial fields of human life and wellbeing are reported: detection of cancer biomarkers, detection of cardiovascular biomarkers, and environmental monitoring.

Anti-aquaporin-4 immunoglobulin G colorimetric detection by silver nanoparticles

Neuromyelitis optica spectrum disorder (NMOSD) is an inflammatory and autoimmune disease whose biomarker is the anti-AQP4-IgG autoantibody that binds to aquaporin-4 (AQP4) protein. We introduced a nanosensor with a sensitivity of 84.6%, higher than the CBA's 76.5%. Using silver nanoparticles (AgNPs), we detected not only seropositive but also some false-negative patients previously classified with CBA. It consisted of AgNPs coated with one of a panel of 5 AQP4 epitopes. The ability in detecting the anti-AQP4-IgG in NMOSD patients depended on the epitope and synergy could be obtained by combining different epitopes. We demonstrated that NMOSD patients could easily be distinguished from healthy subjects and patients with multiple sclerosis. Using the most sensitive AQP4_61-70 peptide, we established a calibration curve to estimate the concentration of anti-AQP4-IgG in seropositive NMOSD patients. The ability to enhance the accuracy of the diagnosis may improve the prognosis of 10-27% of anti-AQP4-IgG seronegative patients worldwide.

An appraisal of data collection, analysis, and reporting adopted for water quality assessment: A case of Nigeria water quality research

The appropriate acquisition and processing of water quality data are crucial for water resource management. As such, published articles on water quality monitoring and assessment are meant to convey essential and reliable information to water quality experts, decision-makers, researchers, students, and the public. The implication is that such information must emanate from data obtained and analysed in an up-to-date, scientifically sound manner. Thus, inappropriate data analysis and reporting techniques could yield misleading results and mar the endeavours of achieving error-free conclusions. This study utilises the findings on water quality assessment in Nigeria over the last 20 years to reveal the likely trends in water quality research regarding data collection, data analysis, and reporting for physicochemical, bacteriological parameters, and trace organics. A total of 123 Web of Science and quartile ranked (Q1-Q4) published articles involving water quality assessment in Nigeria were analysed. Results indicated shortcomings in various aspects of data analysis and reporting. Consequently, we use simulated heatmaps and graphs to illustrate preferred ways of analysing, reporting, and visualising some regularly used descriptive and inferential statistics of water quality variables. Finally, we highlight alternative approaches to the customarily applied water quality assessment methods in Nigeria and emphasise other areas of deficiency that need attention for improved water quality research.

Ultra-sensitive optical fiber sensor based on intermodal interference and temperature calibration for trace detection of copper (II) ions

An ultrahigh sensitive optical fiber sensor for trace detection of Cu²⁺ concentration in aqueous solution with temperature calibration has been developed in this article. Based on the intermodal interference, the sensor is coated with a hydrogel sensing membrane with specific binding to Cu²⁺ on the no-core fiber/single mode fiber/no-core fiber structure by using our new spray coating method. The imidazole group in the sensing film combines with Cu²⁺ to produce chelation, which changes the refractive index of the sensing film. The Cu²⁺ at trace concentration can be detected by monitoring the displacement of the interference trough. The experimental limit of detection of 3.0×10^-12 mol/L can be achieved with the spectral resolution of 0.02 nm. The sensor has also long-term stability of the concentration measurement with the average standard deviation of 1.610×10^-12 mol/L over 2 hours observation time and can be compensated the influence of ambient temperature on concentration detection by conducting the temperature calibration. In addition, the sensor has the advantages of strong specificity, simple fabrication and low cost.

SPR-Optical Fiber-Molecularly Imprinted Polymer Sensor for the Detection of Furfural in Wine

A surface plasmon resonance (SPR) platform, based on a D-shaped plastic optical fiber (POF), combined with a biomimetic receptor, i.e., a molecularly imprinted polymer (MIP), is proposed to detect furfural (2-furaldheide, 2-FAL) in fermented beverages like wine. MIPs have been demonstrated to be a very convenient biomimetic receptor in the proposed sensing device, being easy and rapid to develop, suitable for on-site determinations at low concentrations, and cheap. Moreover, the MIP film thickness can be changed to modulate the sensing parameters. The possibility of performing single drop measurements is a further favorable aspect for practical applications. For example, the use of an SPR-MIP sensor for the analysis of 2-FAL in a real life matrix such as wine is proposed, obtaining a low detection limit of 0.004 mg L⁻¹. The determination of 2-FAL in fermented beverages is becoming a crucial task, mainly for the effects of the furanic compounds on the flavor of food and their toxic and carcinogenic effect on human beings.

Simply and cost-effectively fabricated AuNP-based fusion spliced transmissive optical fiber LSPR probes

The transmissive optical fiber localized surface plasmon resonance (LSPR) sensor has become an effective tool in refractive index sensing because of its compact structure, high sensitivity and strong designability. However, its special structure with the sensing region in the middle of the optical fiber leads to the shortcomings of difficult preparation and poor reproducibility, which greatly restricts its application scopes. In order to solve such problem, we design gold nanoparticle (AuNP)-based fusion spliced transmissive optical fiber LSPR probes, which are fabricated via the fusion splicing between the surface modified combination tapered optical fiber and another multimode quartz optical fiber but are totally different from other fabrications of the reported transmissive optical fiber LSPR probes. The fiber probe fabrication is rather simple and cost-effective, only relying on the procedures of combination tapered optical fiber preparation, surface modification and probe fusion splicing, and except for the probe fusion splicing, the other procedures can be mass prepared thus maintaining high efficiency and good reproducibility in fiber probe fabrications. Moreover, according to the experimental verifications, the proposed fiber probes can reach rather high sensitivity in refractive index sensing with high accuracy and good stability in both static and dynamic detecting modes. Therefore, the AuNP-based fusion spliced transmissive optical fiber LSPR probe is a preferred solution for refractive index sensing and can be widely used in various applications.

Raposo MM. Optical Fiber Sensors for Biocide Monitoring: Examples, Transduction Materials, and Prospects

Antifouling biocides are toxic to the marine environment impacting negatively on the aquatic ecosystems. These biocides, namely, tributyltin (TBT) and Cu(I) compounds, are used to avoid biofouling; however, their toxicity turns TBT and Cu(I) monitoring an important health issue. Current monitoring methods are expensive and time-consuming. This review provides an overview of the actual state of the art of antifouling paints' biocides, including their impact and toxicity, as well as the reported methods for TBT and Cu(I) detection over the past decade. The principles of optical fiber sensors (OFS) applications, with focus on environmental applications, and the use of organic chemosensors in this type of sensors are debated. The multiplexing ability of OFS and their application on aquatic environments are also discussed.