Gas Sensor Array and Classifiers as a Means of Varroosis Detection

Beekeeping breakthrough: unveiling hive health with a portable membrane inlet mass spectrometry detection method

Supporting bee populations is essential considering threats posed by human activities like pesticide usage and habitat destruction. However, the current methods for monitoring and analyzing beehives and their surrounding environments are invasive, complex, and time-consuming. These methods often rely heavily on laboratory analyses, making them difficult to implement independently in the field. This study explores the application of portable membrane inlet mass spectrometer (MIMS) for noninvasive hive analysis, demonstrating its ability to detect various compounds indicative of hive conditions and environmental stressors. In addition to the expected compounds found in beehives, such as α-bergamotene, hexadecanoic acid, heptadecane, hexadecanamide, α-bisabolol-, 9-octadecenamide, (Z) - , and benzaldehyde, unexpected compounds, pollutants, like indane (polycyclic aromatic hydrocarbon) and carbofuran (pesticide), were also detected. The MIMS detection method provides rapid, accurate, and real-time results, making it suitable for preventive measures against bee diseases and integral to environmental biomonitoring. This integration of technology represents a significant advancement in bee conservation efforts, offering hope for the future of both bees and ecosystems.

The Identification of Bee Comb Cell Contents Using Semiconductor Gas Sensors

Beekeeping is an extremely difficult field of agriculture. It requires efficient management of the bee nest so that the bee colony can develop efficiently and produce as much honey and other bee products as possible. The beekeeper, therefore, must constantly monitor the contents of the bee comb. At the University of Warmia and Mazury in Olsztyn, research is being carried out to develop methods for efficient management of the apiary. One of our research goals was to test whether a gas detector (MCA-8) based on six semiconductor sensors-TGS823, TGS826, TGS832, TGS2600, TGS2602, and TGS2603 from the company FIGARO-is able to recognize the contents of bee comb cells. For this purpose, polystyrene and wooden test chambers were created, in which fragments of bee comb with different contents were placed. Gas samples were analyzed from an empty comb, a comb with sealed brood, a comb with open brood, a comb with carbohydrate food in the form of sugar syrup, and a comb with bee bread. In addition, a sample of gas from an empty chamber was tested. The results in two variants were analyzed: (1) Variant 1, the value of 270 s of sensor readings from the sample measurement (exposure phase), and (2) Variant 2, the value of 270 s of sensor readings from the sample measurement (measurement phase) with baseline correction by subtracting the last 600 s of surrounding air measurements (flushing phase). A five-time cross-validation 2 (5xCV2) test and the Monte Carlo cross-validation 25 (trained and tested 25 times) were performed. Fourteen classifiers were tested. The naive Bayes classifier (NB) proved to be the most effective method for distinguishing individual classes from others. The MCA-8 device brilliantly differentiates an empty comb from a comb with contents. It differentiates better between an empty comb and a comb with brood, with results of more than 83%. Lower class accuracy was obtained when distinguishing an empty comb from a comb with food and a comb with bee bread, with results of less than 73%. The matrix of six TGS sensors in the device shows promising versatility in distinguishing between various types of brood and food found in bee comb cells. This capability, though still developing, positions the MCA-8 device as a potentially invaluable tool for enhancing the efficiency and effectiveness of beekeepers in the future.

Advancements in Improving Selectivity of Metal Oxide Semiconductor Gas Sensors Opening New Perspectives for Their Application in Food Industry

Volatile compounds not only contribute to the distinct flavors and aromas found in foods and beverages, but can also serve as indicators for spoilage, contamination, or the presence of potentially harmful substances. As the odor of food raw materials and products carries valuable information about their state, gas sensors play a pivotal role in ensuring food safety and quality at various stages of its production and distribution. Among gas detection devices that are widely used in the food industry, metal oxide semiconductor (MOS) gas sensors are of the greatest importance. Ongoing research and development efforts have led to significant improvements in their performance, rendering them immensely useful tools for monitoring and ensuring food product quality; however, aspects related to their limited selectivity still remain a challenge. This review explores various strategies and technologies that have been employed to enhance the selectivity of MOS gas sensors, encompassing the innovative sensor designs, integration of advanced materials, and improvement of measurement methodology and pattern recognize algorithms. The discussed advances in MOS gas sensors, such as reducing cross-sensitivity to interfering gases, improving detection limits, and providing more accurate assessment of volatile organic compounds (VOCs) could lead to further expansion of their applications in a variety of areas, including food processing and storage, ultimately benefiting both industry and consumers.

Methodology for Quantifying Volatile Compounds in a Liquid Mixture Using an Algorithm Combining B-Splines and Artificial Neural Networks to Process Responses of a Thermally Modulated Metal-Oxide Semiconductor Gas Sensor

Metal oxide semiconductor (MOS) gas sensors have many advantages, but the main obstacle to their widespread use is the cross-sensitivity observed when using this type of detector to analyze gas mixtures. Thermal modulation of the heater integrated with a MOS gas sensor reduced this problem and is a promising solution for applications requiring the selective detection of volatile compounds. Nevertheless, the interpretation of the sensor output signals, which take the form of complex, unique patterns, is difficult and requires advanced signal processing techniques. The study focuses on the development of a methodology to measure and process the output signal of a thermally modulated MOS gas sensor based on a B-spline curve and artificial neural networks (ANNs), which enable the quantitative analysis of volatile components (ethanol and acetone) coexisting in mixtures. B-spline approximation applied in the first stage allowed for the extraction of relevant information from the gas sensor output voltage and reduced the size of the measurement dataset while maintaining the most vital features contained in it. Then, the determined parameters of the curve were used as the input vector for the ANN model based on the multilayer perceptron structure. The results show great usefulness of the combination of B-spline and ANN modeling techniques to improve response selectivity of a thermally modulated MOS gas sensor.

In-Field Detection of American Foulbrood (AFB) by Electric Nose Using Classical Classification Techniques and Sequential Neural Networks

American foulbrood is a dangerous bee disease that attacks the sealed brood. It quickly leads to the death of bee colonies. Efficient diagnosis of this disease is essential. As specific odours are produced when larvae rot, it was investigated whether an electronic nose can distinguish between colonies affected by American foulbrood and healthy ones. The experiment was conducted in an apiary with 18 bee families, 9 of which showed symptoms of the disease confirmed by laboratory diagnostics. Three units of the Beesensor V.2 device based on an array of six semiconductor TGS gas sensors, manufactured by Figaro, were tested. Each copy of the device was tested in all bee colonies: sick and healthy. The measurement session per bee colony lasted 40 min and yielded results from four 10 min measurements. One 10-min measurement consisted of a 5 min regeneration phase and a 5 min object-measurement phase. For the experiments, we used both classical classification methods such as k-nearest neighbour, Naive Bayes, Support Vector Machine, discretized logistic regression, random forests, and committee of classifiers, that is, methods based on extracted representative data fragments. We also used methods based on the entire 600 s series, in this study of sequential neural networks. We considered, in this study, six options for data preparation as part of the transformation of data series into representative results. Among others, we used single stabilised sensor readings as well as average values from stable areas. For verifying the quality of the classical classifiers, we used the 25-fold train-and-test method. The effectiveness of the tested methods reached a threshold of 75 per cent, with results stable between 65 and 70 per cent. As an element to confirm the possibility of class separation using an artificial nose, we used applied visualisations of classes. It is clear from the experiments conducted that the artificial nose tested has practical potential. Our experiments show that the approach to the problem under study by sequential network learning on a sequence of data is comparable to the best classical methods based on discrete data samples. The results of the experiment showed that the Beesensor V.2 along with properly selected classification techniques can become a tool to facilitate rapid diagnosis of American foulbrood under field conditions.

Recording the Presence of Peanibacillus larvae larvae Colonies on MYPGP Substrates Using a Multi-Sensor Array Based on Solid-State Gas Sensors

American foulbrood is a dangerous disease of bee broods found worldwide, caused by the Paenibacillus larvae larvae L. bacterium. In an experiment, the possibility of detecting colonies of this bacterium on MYPGP substrates (which contains yeast extract, Mueller-Hinton broth, glucose, K2HPO4, sodium pyruvate, and agar) was tested using a prototype of a multi-sensor recorder of the MCA-8 sensor signal with a matrix of six semiconductors: TGS 823, TGS 826, TGS 832, TGS 2600, TGS 2602, and TGS 2603 from Figaro. Two twin prototypes of the MCA-8 measurement device, M1 and M2, were used in the study. Each prototype was attached to two laboratory test chambers: a wooden one and a polystyrene one. For the experiment, the strain used was P. l. larvae ATCC 9545, ERIC I. On MYPGP medium, often used for laboratory diagnosis of American foulbrood, this bacterium produces small, transparent, smooth, and shiny colonies. Gas samples from over culture media of one- and two-day-old foulbrood P. l. larvae (with no colonies visible to the naked eye) and from over culture media older than 2 days (with visible bacterial colonies) were examined. In addition, the air from empty chambers was tested. The measurement time was 20 min, including a 10-min testing exposure phase and a 10-min sensor regeneration phase. The results were analyzed in two variants: without baseline correction and with baseline correction. We tested 14 classifiers and found that a prototype of a multi-sensor recorder of the MCA-8 sensor signal was capable of detecting colonies of P. l. larvae on MYPGP substrate with a 97% efficiency and could distinguish between MYPGP substrates with 1–2 days of culture, and substrates with older cultures. The efficacy of copies of the prototypes M1 and M2 was shown to differ slightly. The weighted method with Canberra metrics (Canberra.811) and kNN with Canberra and Manhattan metrics (Canberra. 1nn and manhattan.1nn) proved to be the most effective classifiers.

Beehive Air Sampling and Sensing Device Operation in Apicultural Applications-Methodological and Technical Aspects

The basis of effective beekeeping is the information about the state of the bee colony. A rich source of respective information is beehive air. This source may be explored by applying gas sensing. It allows for classifying bee colony states based on beehive air measurements. In this work, we discussed the essential aspects of beehive air sampling and sensing device operation in apicultural applications. They are the sampling method (diffusive vs. dynamic, temporal aspects), sampling system (sample probe, sampling point selection, sample conditioning unit and sample delivery system) and device operation mode ('exposure-cleaning' operation). It was demonstrated how factors associated with the beehive, bee colony and ambient environment define prerequisites for these elements of the measuring instrument. These requirements have to be respected in order to assure high accuracy of measurement and high-quality information. The presented results are primarily based on the field measurement study performed in summer 2020, in three apiaries, in various meteorological conditions. Two exemplars of a prototype gas sensing device were used. These sensor devices were constructed according to our original concept.

Classifying the Biological Status of Honeybee Workers Using Gas Sensors

Honeybee workers have a specific smell depending on the age of workers and the biological status of the colony. Laboratory tests were carried out at the Department of Apiculture at UWM Olsztyn, using gas sensors installed in two twin prototype multi-sensor detectors. The study aimed to compare the responses of sensors to the odor of old worker bees (3–6 weeks old), young ones (0–1 days old), and those from long-term queenless colonies. From the experimental colonies, 10 samples of 100 workers were taken for each group and placed successively in the research chambers for the duration of the study. Old workers came from outer nest combs, young workers from hatching out brood in an incubator, and laying worker bees from long-term queenless colonies from brood combs (with laying worker bee’s eggs, humped brood, and drones). Each probe was measured for 10 min, and then immediately for another 10 min ambient air was given to regenerate sensors. The results were analyzed using 10 different classifiers. Research has shown that the devices can distinguish between the biological status of bees. The effectiveness of distinguishing between classes, determined by the parameters of accuracy balanced and true positive rate, of 0.763 and 0.742 in the case of the best euclidean.1nn classifier, may be satisfactory in the context of practical beekeeping. Depending on the environment accompanying the tested objects (a type of insert in the test chamber), the introduction of other classifiers as well as baseline correction methods may be considered, while the selection of the appropriate classifier for the task may be of great importance for the effectiveness of the classification.

Varroa destructor: how does it harm Apis mellifera honey bees and what can be done about it?

Since its migration from the Asian honey bee (Apis cerana) to the European honey bee (Apis mellifera), the ectoparasitic mite Varroa destructor has emerged as a major issue for beekeeping worldwide. Due to a short history of coevolution, the host–parasite relationship between A. mellifera and V. destructor is unbalanced, with honey bees suffering infestation effects at the individual, colony and population levels. Several control solutions have been developed to tackle the colony and production losses due to Varroa, but the burden caused by the mite in combination with other biotic and abiotic factors continues to increase, weakening the beekeeping industry. In this synthetic review, we highlight the main advances made between 2015 and 2020 on V. destructor biology and its impact on the health of the honey bee, A. mellifera. We also describe the main control solutions that are currently available to fight the mite and place a special focus on new methodological developments, which point to integrated pest management strategies for the control of Varroa in honey bee colonies.

Diagnosis of Varroosis Based on Bee Brood Samples Testing with Use of Semiconductor Gas Sensors

Varroosis is a dangerous and difficult to diagnose disease decimating bee colonies. The studies conducted sought answers on whether the electronic nose could become an effective tool for the efficient detection of this disease by examining sealed brood samples. The prototype of a multi-sensor recorder of gaseous sensor signals with a matrix of six semiconductor gas sensors TGS 823, TGS 826, TGS 832, TGS 2600, TGS 2602, and TGS 2603 from FIGARO was tested in this area. There were 42 objects belonging to 3 classes tested: 1st class—empty chamber (13 objects), 2nd class—fragments of combs containing brood sick with varroosis (19 objects), and 3rd class—fragments of combs containing healthy sealed brood (10 objects). The examination of a single object lasted 20 min, consisting of the exposure phase (10 min) and the sensor regeneration phase (10 min). The k-th nearest neighbors algorithm (kNN)—with default settings in RSES tool—was successfully used as the basic classifier. The basis of the analysis was the sensor reading value in 270 s with baseline correction. The multi-sensor MCA-8 gas sensor signal recorder has proved to be an effective tool in distinguishing between brood suffering from varroosis and healthy brood. The five-time cross-validation 2 test (5 × CV2 test) showed a global accuracy of 0.832 and a balanced accuracy of 0.834. Positive rate of the sick brood class was 0.92. In order to check the overall effectiveness of baseline correction in the examined context, we have carried out additional series of experiments—in multiple Monte Carlo Cross Validation model—using a set of classifiers with different metrics. We have tested a few variants of the kNN method, the Naïve Bayes classifier, and the weighted voting classifier. We have verified with statistical tests the thesis that the baseline correction significantly improves the level of classification. We also confirmed that it is enough to use the TGS2603 sensor in the examined context.

Detecting varroosis using a gas sensor system as a way to face the environmental threat

Colony Collapse Disorder (CCD) is an environmental threat on a global scale due to the irreplaceable role of bees in crop pollination. Varroa destructor (V.d.), a parasite that attacks honeybee colonies, is one of the primary causes of honey bee population decline and the most serious threat to the beekeeping sector. This work demonstrates the possibility of quantitatively determining bee colony infestation by V.d. using gas sensing. The results are based on analysing the experimental data acquired for eighteen bee colonies in field conditions. Their infestation rate was in the 0 to 24.76% range. The experimental data consisted of measurements of beehive air with a semiconductor gas sensor array and the results of bee colony V.d. infestation assessment using a flotation method. The two kinds of data were collected in parallel. Partial Least Square regression was applied to identify the relationship between the highly multivariate measurement data provided by the gas sensor array and the V.d. infestation rate. The quality of the developed quantitative models was very high, as demonstrated by the coefficient of determination exceeding R² = 0.99. Moreover, the prediction error was <0.6% for V.d. infestation rate predictions based on the measurement data that was unknown to the model. The presented work has considerable novelty. To our knowledge, the ability to determine the V.d. infestation rate of bee colony quantitatively based on beehive air measurements using a semiconductor gas sensor array has not been previously demonstrated.

The Effectiveness of Varroa destructor Infestation Classification Using an E-Nose Depending on the Time of Day

Honey bees are subject to a number of stressors. In recent years, there has been a worldwide decline in the population of these insects. Losses raise a serious concern, because bees have an indispensable role in the food supply of humankind. This work is focused on the method of assessment of honey bee colony infestation by Varroa destructor. The approach allows to detect several categories of infestation: "Low", "Medium" and "High". The method of detection consists of two components: (1) the measurements of beehive air using a gas sensor array and (2) classification, which is based on the measurement data. In this work, we indicate the sensitivity of the bee colony infestation assessment to the timing of measurement data collection. It was observed that the semiconductor gas sensor responses to the atmosphere of a defined beehive, collected during 24 h, displayed temporal variation. We demonstrated that the success rate of the bee colony infestation assessment also altered depending on the time of day when the gas sensor array measurement was done. Moreover, it was found that different times of day were the most favorable to detect the particular infestation category. This result could indicate that the representation of the disease in the beehive air may be confounded during the day, due to some interferences. More studies are needed to explain this fact and determine the best measurement periods. The problem addressed in this work is very important for scheduling the beekeeping practices aimed at Varroa destructor infestation assessment, using the proposed method.