1
|
Khalili M, GholamHosseini H, Lowe A, Kuo MMY. Motion artifacts in capacitive ECG monitoring systems: a review of existing models and reduction techniques. Med Biol Eng Comput 2024:10.1007/s11517-024-03165-1. [PMID: 39031328 DOI: 10.1007/s11517-024-03165-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/14/2024] [Accepted: 06/27/2024] [Indexed: 07/22/2024]
Abstract
Current research focuses on improving electrocardiogram (ECG) monitoring systems to enable real-time and long-term usage, with a specific focus on facilitating remote monitoring of ECG data. This advancement is crucial for improving cardiovascular health by facilitating early detection and management of cardiovascular disease (CVD). To efficiently meet these demands, user-friendly and comfortable ECG sensors that surpass wet electrodes are essential. This has led to increased interest in ECG capacitive electrodes, which facilitate signal detection without requiring gel preparation or direct conductive contact with the body. This feature makes them suitable for wearables or integrated measurement devices. However, ongoing research is essential as the signals they measure often lack sufficient clinical accuracy due to susceptibility to interferences, particularly Motion Artifacts (MAs). While our primary focus is on studying MAs, we also address other limitations crucial for designing a high Signal-to-Noise Ratio (SNR) circuit and effectively mitigating MAs. The literature on the origins and models of MAs in capacitive electrodes is insufficient, which we aim to address alongside discussing mitigation methods. We bring attention to digital signal processing approaches, especially those using reference signals like Electrode-Tissue Impedance (ETI), as highly promising. Finally, we discuss its challenges, proposed solutions, and offer insights into future research directions.
Collapse
Affiliation(s)
- Matin Khalili
- Institute of Biomedical Technologies, Auckland University of Technology, 6 St Paul St, Auckland, 1010, New Zealand.
- Department of Electrical and Electronic Engineering, Auckland University of Technology, 6 St Paul St, Auckland, 1010, New Zealand.
| | - Hamid GholamHosseini
- Institute of Biomedical Technologies, Auckland University of Technology, 6 St Paul St, Auckland, 1010, New Zealand
- Department of Electrical and Electronic Engineering, Auckland University of Technology, 6 St Paul St, Auckland, 1010, New Zealand
| | - Andrew Lowe
- Institute of Biomedical Technologies, Auckland University of Technology, 6 St Paul St, Auckland, 1010, New Zealand
| | - Matthew M Y Kuo
- Department of Computer Science and Software Engineering, Auckland University of Technology, 6 St Paul St, Auckland, 1010, New Zealand
| |
Collapse
|
2
|
Abu-Saude M, Morshed BI. Inductive Coupling of Bipolar Signals with a Conjugate Coil Pair for an Analog Passive ECG Sensor Using a PPy-Coated pvCNT Dry Electrodes. SENSORS (BASEL, SWITZERLAND) 2023; 23:s23115283. [PMID: 37300009 DOI: 10.3390/s23115283] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/18/2023] [Revised: 05/27/2023] [Accepted: 05/30/2023] [Indexed: 06/12/2023]
Abstract
The wireless capture of analog differential signals from fully passive (battery-less) sensors is technically challenging but it can allow for the seamless capture of differential biosignals such as an electrocardiogram (ECG). This paper presents a novel design for the wireless capture of analog differential signals using a novel conjugate coil pair for a wireless resistive analog passive (WRAP) ECG sensor. Furthermore, we integrate this sensor with a new type of dry electrode, namely conductive polymer polypyrrole (PPy)-coated patterned vertical carbon nanotube (pvCNT) electrodes. The proposed circuit uses dual-gate depletion-mode MOSFETs to convert the differential biopotential signals to correlated drain-source resistance changes and the conjugate coil wirelessly transmits the differences of the two input signals. The circuit rejects (17.24 dB) common mode signals and passing only differential signals. We have integrated this novel design with our previously reported PPy-coated pvCNT dry ECG electrodes, fabricated on a stainless steel substrate with a diameter of 10 mm, which provided a zero-power (battery-less) ECG capture system for long duration monitoring. The scanner transmits an RF carrier signal at 8.37 MHz. The proposed ECG WRAP sensor uses only two complementary biopotential amplifier circuits, each of which has a single-depletion MOSFET. The amplitude-modulated RF signal is envelope-detected, filtered, amplified, and transmitted to a computer for signal processing. ECG signals are collected using this WRAP sensor and compared with a commercial counterpart. Due to the battery-less nature of the ECG WRAP sensor, it has the potential to be a body-worn electronic circuit patch with dry pvCNT electrodes that stably operate for a long period of time.
Collapse
Affiliation(s)
- Mohammad Abu-Saude
- Department of Electrical and Computer Engineering, University of Memphis, Memphis, TN 38152, USA
| | - Bashir I Morshed
- Department of Computer Science, Texas Tech University, Lubbock, TX 79409, USA
| |
Collapse
|
3
|
Heaney J, Buick J, Hadi MU, Soin N. Internet of Things-Based ECG and Vitals Healthcare Monitoring System. MICROMACHINES 2022; 13:2153. [PMID: 36557452 PMCID: PMC9780965 DOI: 10.3390/mi13122153] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/15/2022] [Revised: 11/29/2022] [Accepted: 11/30/2022] [Indexed: 06/17/2023]
Abstract
Health monitoring and its associated technologies have gained enormous importance over the past few years. The electrocardiogram (ECG) has long been a popular tool for assessing and diagnosing cardiovascular diseases (CVDs). Since the literature on ECG monitoring devices is growing at an exponential rate, it is becoming difficult for researchers and healthcare professionals to select, compare, and assess the systems that meet their demands while also meeting the monitoring standards. This emphasizes the necessity for a reliable reference to guide the design, categorization, and analysis of ECG monitoring systems, which will benefit both academics and practitioners. We present a complete ECG monitoring system in this work, describing the design stages and implementation of an end-to-end solution for capturing and displaying the patient's heart signals, heart rate, blood oxygen levels, and body temperature. The data will be presented on an OLED display, a developed Android application as well as in MATLAB via serial communication. The Internet of Things (IoT) approaches have a clear advantage in tackling the problem of heart disease patient care as they can transform the service mode into a widespread one and alert the healthcare services based on the patient's physical condition. Keeping this in mind, there is also the addition of a web server for monitoring the patient's status via WiFi. The prototype, which is compliant with the electrical safety regulations and medical equipment design, was further benchmarked against a commercially available off-the-shelf device, and showed an excellent accuracy of 99.56%.
Collapse
|
4
|
Size Constraint to Limit Interference in DRL-Free Single-Ended Biopotential Measurements. J Med Biol Eng 2022. [DOI: 10.1007/s40846-022-00720-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
5
|
Abstract
Digital phenotyping (DP) provides opportunities to study child and adolescent psychiatry from a novel perspective. DP combines objective data obtained from digital sensors with participant-generated "active data," in order to understand better an individual's behavior and environmental interactions. Although this new method has led to advances in adult psychiatry, its use in child psychiatry has been more limited. This review aims to demonstrate potential benefits of DP methodology and passive data collection by reviewing studies specifically in child and adolescent psychiatry. Twenty-six studies were identified that collected passive data from four different categories: accelerometer/actigraph data, physiological data, GPS data, and step count. Study topics ranged from the associations between manic symptomology and cardiac parameters to the role of daily emotions, sleep, and social interactions in treatment for pediatric anxiety. Reviewed studies highlighted the diverse ways in which objective data can augment naturalistic self-report methods in child and adolescent psychiatry to allow for more objective, ecologically valid, and temporally resolved conclusions. Though limitations exist-including a lack of participant adherence and device failure and misuse-DP technology may represent a new and effective method for understanding pediatric cognition, behavior, disease etiology, and treatment efficacy.
Collapse
|
6
|
Polachan K, Chatterjee B, Weigand S, Sen S. Human Body-Electrode Interfaces for Wide-Frequency Sensing and Communication: A Review. NANOMATERIALS (BASEL, SWITZERLAND) 2021; 11:2152. [PMID: 34443980 PMCID: PMC8401560 DOI: 10.3390/nano11082152] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/21/2021] [Revised: 08/16/2021] [Accepted: 08/17/2021] [Indexed: 12/02/2022]
Abstract
Several on-body sensing and communication applications use electrodes in contact with the human body. Body-electrode interfaces in these cases act as a transducer, converting ionic current in the body to electronic current in the sensing and communication circuits and vice versa. An ideal body-electrode interface should have the characteristics of an electrical short, i.e., the transfer of ionic currents and electronic currents across the interface should happen without any hindrance. However, practical body-electrode interfaces often have definite impedances and potentials that hinder the free flow of currents, affecting the application's performance. Minimizing the impact of body-electrode interfaces on the application's performance requires one to understand the physics of such interfaces, how it distorts the signals passing through it, and how the interface-induced signal degradations affect the applications. Our work deals with reviewing these elements in the context of biopotential sensing and human body communication.
Collapse
Affiliation(s)
- Kurian Polachan
- School of Electrical and Computer Engineering, Purdue University, West Lafayette, IN 47906, USA; (B.C.); (S.S.)
| | - Baibhab Chatterjee
- School of Electrical and Computer Engineering, Purdue University, West Lafayette, IN 47906, USA; (B.C.); (S.S.)
| | | | - Shreyas Sen
- School of Electrical and Computer Engineering, Purdue University, West Lafayette, IN 47906, USA; (B.C.); (S.S.)
| |
Collapse
|
7
|
Babusiak B, Hajducik A, Medvecky S, Lukac M, Klarak J. Design of Smart Steering Wheel for Unobtrusive Health and Drowsiness Monitoring. SENSORS 2021; 21:s21165285. [PMID: 34450727 PMCID: PMC8399225 DOI: 10.3390/s21165285] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/07/2021] [Revised: 07/30/2021] [Accepted: 08/03/2021] [Indexed: 12/26/2022]
Abstract
This article describes the design of a smart steering wheel intended for use in unobtrusive health and drowsiness monitoring. The aging population, cardiovascular disease, personalized medicine, and driver fatigue were significant motivations for developing a monitoring platform in cars because people spent much time in cars. The purpose was to create a unique, comprehensive monitoring system for the driver. The crucial parameters in health or drowsiness monitoring, such as heart rate, heart rate variability, and blood oxygenation, are measured by an electrocardiograph and oximeter integrated into the steering wheel. In addition, an inertial unit was integrated into the steering wheel to record and analyze the movement patterns performed by the driver while driving. The developed steering wheel was tested under laboratory and real-life conditions. The measured signals were verified by commercial devices to confirm data correctness and accuracy. The resulting signals show the applicability of the developed platform in further detecting specific cardiovascular diseases (especially atrial fibrillation) and drowsiness.
Collapse
Affiliation(s)
- Branko Babusiak
- Department of Electromagnetic and Biomedical Engineering, University of Zilina, 01026 Zilina, Slovakia
- Correspondence:
| | - Adrian Hajducik
- Department of Design and Machine Elements, University of Zilina, 01026 Zilina, Slovakia; (A.H.); (M.L.)
| | - Stefan Medvecky
- Institute of Competitiveness and Innovation, University of Zilina, 01026 Zilina, Slovakia;
| | - Michal Lukac
- Department of Design and Machine Elements, University of Zilina, 01026 Zilina, Slovakia; (A.H.); (M.L.)
| | - Jaromir Klarak
- Department of Automated Production Systems, University of Zilina, 01026 Zilina, Slovakia;
| |
Collapse
|