Non-Destructive Detection of Bone Fragments Embedded in Meat Using Hyperspectral Reflectance Imaging Technique

Compact imaging system and deep learning based segmentation for objective longissimus muscle area in Korean beef carcass

With growing consumer interest in meat quality, the need for accurate quality assessment becomes increasingly important. One crucial factor of Korean beef quality is the longissimus muscle area, which is closely associated with both quality and yield grade. Currently, the measurement is visually assessed, introducing subjectivity and placing a substantial burden on inspectors in terms of labor. To address these challenges, we have developed a compact image acquisition system designed to acquire accurate grading assessment images of beef carcasses. Several preprocessing steps after image acquisition were conducted, including radial distortion correction and color calibration. We have employed conventional image-processing techniques and four deep-learning models to segment the longissimus muscle area using the calibrated images. Among the segmentation models, DeepLab model based on ResNet50 achieved the highest accuracy. It demonstrated a Global Accuracy, Weighted IoU, and Mean BF Score of approximately 99.26%, 98.54%, and 95.70%, respectively. The results of our study are expected to contribute to the development of objective criteria for loin area assessment. By enabling precise and consistent determination of beef carcass quality, our research has the potential to reduce labor requirements for inspectors and provide a standardized approach to assessing loin area.

A Review of Recent Advances for the Detection of Biological, Chemical, and Physical Hazards in Foodstuffs Using Spectral Imaging Techniques

Traditional methods for detecting foodstuff hazards are time-consuming, inefficient, and destructive. Spectral imaging techniques have been proven to overcome these disadvantages in detecting foodstuff hazards. Compared with traditional methods, spectral imaging could also increase the throughput and frequency of detection. This study reviewed the techniques used to detect biological, chemical, and physical hazards in foodstuffs including ultraviolet, visible and near-infrared (UV-Vis-NIR) spectroscopy, terahertz (THz) spectroscopy, hyperspectral imaging, and Raman spectroscopy. The advantages and disadvantages of these techniques were discussed and compared. The latest studies regarding machine learning algorithms for detecting foodstuff hazards were also summarized. It can be found that spectral imaging techniques are useful in the detection of foodstuff hazards. Thus, this review provides updated information regarding the spectral imaging techniques that can be used by food industries and as a foundation for further studies.

Hyperspectral imaging and machine learning in food microbiology: Developments and challenges in detection of bacterial, fungal, and viral contaminants

Hyperspectral imaging (HSI) is a robust and nondestructive method that can detect foreign particles such as microbial, chemical, and physical contamination in food. This review summarizes the work done in the last two decades in this field with a highlight on challenges, risks, and research gaps. Considering the challenges of using HSI on complex matrices like food (e.g., the confounding and masking effects of background signals), application of machine learning and modeling approaches that have been successful in achieving better accuracy as well as increasing the detection limit have also been discussed here. Foodborne microbial contaminants such as bacteria, fungi, viruses, yeast, and protozoa are of interest and concern to food manufacturers due to the potential risk of either food poisoning or food spoilage. Detection of these contaminants using fast and efficient methods would not only prevent outbreaks and recalls but will also increase consumer acceptance and demand for shelf-stable food products. The conventional culture-based methods for microbial detection are time and labor-intensive, whereas hyperspectral imaging (HSI) is robust, nondestructive with minimum sample preparation, and has gained significant attention due to its rapid approach to detection of microbial contaminants. This review is a comprehensive summary of the detection of bacterial, viral, and fungal contaminants in food with detailed emphasis on the specific modeling and datamining approaches used to overcome the specific challenges associated with background and data complexity.

Detection of Foreign Materials on Broiler Breast Meat Using a Fusion of Visible Near-Infrared and Short-Wave Infrared Hyperspectral Imaging

Foreign material (FM) found on a poultry product lowers the quality and safety of the product. We developed a fusion method combining two hyperspectral imaging (HSI) modalities in the visible-near infrared (VNIR) range of 400–1000 nm and the short-wave infrared (SWIR) range of 1000–2500 nm for the detection of FMs on the surface of fresh raw broiler breast fillets. Thirty different types of FMs that could be commonly found in poultry processing plants were used as samples and prepared in two different sizes (5 × 5 mm2 and 2 × 2 mm2). The accuracies of the developed Fusion model for detecting 2 × 2 mm2 pieces of polymer, wood, and metal were 95%, 95%, and 81%, respectively, while the detection accuracies of the Fusion model for detecting 5 × 5 mm2 pieces of polymer, wood, and metal were all 100%. The performance of the Fusion model was higher than the VNIR- and SWIR-based detection models by 18% and 5%, respectively, when F1 scores were compared, and by 38% and 5%, when average detection rates were compared. The study results suggested that the fusion of two HSI modalities could detect FMs more effectively than a single HSI modality.

Rapid Foreign Object Detection System on Seaweed Using VNIR Hyperspectral Imaging

The consumption of seaweed is increasing year by year worldwide. Therefore, the foreign object inspection of seaweed is becoming increasingly important. Seaweed is mixed with various materials such as laver and sargassum fusiforme. So it has various colors even in the same seaweed. In addition, the surface is uneven and greasy, causing diffuse reflections frequently. For these reasons, it is difficult to detect foreign objects in seaweed, so the accuracy of conventional foreign object detectors used in real manufacturing sites is less than 80%. Supporting real-time inspection should also be considered when inspecting foreign objects. Since seaweed requires mass production, rapid inspection is essential. However, hyperspectral imaging techniques are generally not suitable for high-speed inspection. In this study, we overcome this limitation by using dimensionality reduction and using simplified operations. For accuracy improvement, the proposed algorithm is carried out in 2 stages. Firstly, the subtraction method is used to clearly distinguish seaweed and conveyor belts, and also detect some relatively easy to detect foreign objects. Secondly, a standardization inspection is performed based on the result of the subtraction method. During this process, the proposed scheme adopts simplified and burdenless calculations such as subtraction, division, and one-by-one matching, which achieves both accuracy and low latency performance. In the experiment to evaluate the performance, 60 normal seaweeds and 60 seaweeds containing foreign objects were used, and the accuracy of the proposed algorithm is 95%. Finally, by implementing the proposed algorithm as a foreign object detection platform, it was confirmed that real-time operation in rapid inspection was possible, and the possibility of deployment in real manufacturing sites was confirmed.

Emerging nondestructive approaches for meat quality and safety evaluation-A review

Meat is one of the most consumed agro-products because it contains proteins, minerals, and essential vitamins, all of which play critical roles in the human diet and health. Meat is a perishable food product because of its high moisture content, and as such there are concerns about its quality, stability, and safety. There are two widely used methods for monitoring meat quality attributes: subjective sensory evaluation and chemical/instrumentation tests. However, these methods are labor-intensive, time-consuming, and destructive. To overcome the shortfalls of these conventional approaches, several researchers have developed fast and nondestructive techniques. Recently, electronic nose (e-nose), computer vision (CV), spectroscopy, hyperspectral imaging (HSI), and multispectral imaging (MSI) technologies have been explored as nondestructive methods in meat quality and safety evaluation. However, most of the studies on the application of these novel technologies are still in the preliminary stages and are carried out in isolation, often without comprehensive information on the most suitable approach. This lack of cohesive information on the strength and shortcomings of each technique could impact their application and commercialization for the detection of important meat attributes such as pH, marbling, or microbial spoilage. Here, we provide a comprehensive review of recent nondestructive technologies (e-nose, CV, spectroscopy, HSI, and MSI), as well as their applications and limitations in the detection and evaluation of meat quality and safety issues, such as contamination, adulteration, and quality classification. A discussion is also included on the challenges and future outlooks of the respective technologies and their various applications.

Scaling-Based Two-Step Reconstruction in Full Polarization-Compressed Hyperspectral Imaging

Polarized hyperspectral images can reflect the rich physicochemical characteristics of targets. Meanwhile, the contained plentiful information also brings great challenges to signal processing. Although compressive sensing theory provides a good idea for image processing, the simplified compression imaging system has difficulty in reconstructing full polarization information. Focused on this problem, we propose a two-step reconstruction method to handle polarization characteristics of different scales progressively. This paper uses a quarter-wave plate and a liquid crystal tunable filter to achieve full polarization compression and hyperspectral imaging. According to their numerical features, the Stokes parameters and their modulation coefficients are simultaneously scaled. The first Stokes parameter is reconstructed in the first step based on compressive sensing. Then, the last three Stokes parameters with similar order of magnitude are reconstructed in the second step based on previous results. The simulation results show that the two-step reconstruction method improves the reconstruction accuracy by 7.6 dB for the parameters that failed to be reconstructed by the non-optimized method, and reduces the reconstruction time by 8.25 h without losing the high accuracy obtained by the current optimization method. This feature scaling method provides a reference for the fast and high-quality reconstruction of physical quantities with obvious numerical differences.