Mode Sensitivity Exploration of Silica-Titania Waveguide for Refractive Index Sensing Applications

Numerical scrutiny of a silica-titania-based reverse rib waveguide with vertical and rounded sidewalls

In this work, a modal analysis of reverse rib waveguide (RRW) structures based on a silica-titania platform is carried out. The silica-titania waveguide films can be deposited via the sol-gel method and dip-coating technique. To combine this low-cost deposition technique with the economical fabrication method, we propose to structure the samples via wet-chemical etching. Due to the isotropic nature of wet etching, the waveguide architecture with rounded sidewalls is considered to model the RRW. Additionally, the modal conditions and bending loss are compared with the RRW with vertical sidewalls. It is assumed that this study will be beneficial for comprehending the modal conditions of waveguide structures with perfectly vertical and rounded sidewalls.

Thin-Film Coating Methods: A Successful Marriage of High-Quality and Cost-Effectiveness—A Brief Exploration

In this review, several cost-effective thin-film coating methods, which include dip-coating, spin-coating, spray-coating, blade-coating, and roll-coating, are presented. Each method has its own set of advantages and disadvantages depending on the proposed application. Not all of them are appropriate for large-scale production due to their certain limitations. That is why the coating method should be selected based on the type and size of the substrate, including the thickness and surface roughness of the required thin films. The sol–gel method offers several benefits, such as simplicity in fabrication, excellent film uniformity, the capacity to cover surfaces of any size and over vast areas, and a low processing temperature. Nevertheless, these coating methods are somewhat economical and well managed in low-budget laboratories. Moreover, these methods offer thin films with good homogeneity and low-surface roughness. Furthermore, some other thin-film deposition methods, for instance, physical vapor deposition (PVD) and chemical vapor deposition (CVD), are also discussed. Since CVD is not restricted to line-of-sight deposition, a characteristic shared by sputtering, evaporation, and other PVD methods, many manufacturing methods favor it. However, these techniques require sophisticated equipment and cleanroom facilities. We aim to provide the pros and cons of thin-film coating methods and let the readers decide the suitable coating technique for their specific application.

Advances in Waveguide Bragg Grating Structures, Platforms, and Applications: An Up-to-Date Appraisal

A Bragg grating (BG) is a one-dimensional optical device that may reflect a specific wavelength of light while transmitting all others. It is created by the periodic fluctuation of the refractive index in the waveguide (WG). The reflectivity of a BG is specified by the index modulation profile. A Bragg grating is a flexible optical filter that has found broad use in several scientific and industrial domains due to its straightforward construction and distinctive filtering capacity. WG BGs are also widely utilized in sensing applications due to their easy integration and high sensitivity. Sensors that utilize optical signals for sensing have several benefits over conventional sensors that use electric signals to achieve detection, including being lighter, having a strong ability to resist electromagnetic interference, consuming less power, operating over a wider frequency range, performing consistently, operating at a high speed, and experiencing less loss and crosstalk. WG BGs are simple to include in chips and are compatible with complementary metal-oxide-semiconductor (CMOS) manufacturing processes. In this review, WG BG structures based on three major optical platforms including semiconductors, polymers, and plasmonics are discussed for filtering and sensing applications. Based on the desired application and available fabrication facilities, the optical platform is selected, which mainly regulates the device performance and footprint.

Optical Thin Films Fabrication Techniques-Towards a Low-Cost Solution for the Integrated Photonic Platform: A Review of the Current Status

In the past few decades, several methods concerning optical thin films have been established to facilitate the development of integrated optics. This paper provides a brief depiction of different techniques for implementing optical waveguide thin films that involve chemical, physical, and refractive index modification methods. Recent advances in these fabrication methods are also been presented. Most of the methods developed for the realization of the thin-films are quite efficient, but they are expensive and require sophisticated equipment. The major interest of the scientists is to develop simple and cost-effective methods for mass production of optical thin films resulting in the effective commercialization of the waveguide technology. Our research group is focused on developing a silica-titania optical waveguide platform via the sol-gel dip-coating method and implementing active and passive optical elements via the wet etching method. We are also exploring the possibility of using nanoimprint lithography (NIL) for patterning these films so that the fabrication process is efficient and economical. The recent developments of this platform are discussed. We believe that silica-titania waveguide technology developed via the sol-gel dip-coating method is highly attractive and economical, such that it can be commercialized for applications such as sensing and optical interconnects.

Subwavelength Grating Waveguide Structures Proposed on the Low-Cost Silica-Titania Platform for Optical Filtering and Refractive Index Sensing Applications

The sol−gel dip-coating method is a cost-efficient way for the realization of thin films on a planar substrate. In this work, high-quality, low-loss, and low-surface roughness silica−titania thin films are deposited on a glass substrate with the sol−gel dip-coating method. This platform works in the visible to near-IR wavelength ranges and can be useful for several eye-catching photonic components. The paper is comprised of two parts: the first part deals with the development of a low-cost silica−titania waveguide system, whereas the second part provides detail on the numerical modeling of the SWG waveguide filter and SWG waveguide FP-sensor design. The SWG waveguide NIR-stopband filter can achieve an ER of >40 dB and 3-dB bandwidth of 110 nm designed at optimized parameters. The SWG waveguide-FP structure proposed in this work act as a refractive index sensor where the sensitivity is ~120 nm/RIU by reducing the width of the waveguide. This sensitivity can be further enhanced by reducing the waveguide height. We believe that this work is quite important for the realization of low-cost integrated photonic devices based on the silica−titania platform developed via the sol−gel dip-coating method.