Smart PZT-Embedded Sensors for Impedance Monitoring in Prestressed Concrete Anchorage

Capsule-Like Smart Aggregate with Pre-Determined Frequency Range for Impedance-Based Stress Monitoring

In this article, a new capsule-like smart aggregate (CSA) is developed and verified for impedance-based stress monitoring in a pre-determined frequency range of less than 100 kHz. The pros and cons of the existing smart aggregate models are discussed to define the requirement for the improved CSA model. The conceptual design and the impedance measurement model of the capsule-like smart aggregate (CSA) are demonstrated for concrete damage monitoring. In the model, the interaction between the CSA and the monitored structure is considered as the 2-degrees of freedom (2-DOF) impedance system. The mechanical and impedance responses of the CSA are described for two conditions: during concrete strength development and under compressive loadings. Next, the prototype of the CSA is designed for impedance-based monitoring in concrete structures. The local dynamic properties of the CSA are numerically simulated to pre-determine the sensitive frequency bands of the impedance signals. Numerical and experimental impedance analyses are performed to investigate the sensitivity of the CSA under compressive loadings. The changes in the impedance signals of the CSA induced by the compressive loadings are analyzed to assess the effect of loading directions on the performance of the CSA. Correlations between statistical impedance features and compressive stresses are also made to examine the feasibility of the CSA for stress quantification.

Efficacy and Damage Diagnosis of Reinforced Concrete Columns and Joints Strengthened with FRP Ropes Using Piezoelectric Transducers

Recent research has indicated that the implantation of a network of piezoelectric transducer patches in element regions of potential damage development, such as the beam-column joint (BCJ) area, substantially increases the efficacy and accuracy of the structural health monitoring (SHM) methods to identify damage level, providing a reliable diagnosis. The use of piezoelectric lead zirconate titanate (PZT) transducers for the examination of the efficiency of an innovative strengthening technique of reinforced concrete (RC) columns and BCJs is presented and commented on. Two real-scale RC BCJ subassemblages were constructed for this investigation. The columns and the joint panel of the second subassemblage were externally strengthened with carbon fiber-reinforced polymer (C-FRP) ropes. To examine the efficiency of this strengthening technique we used the following transducers: (a) PZT sensors on the ropes and the concrete; (b) tSring linear variable displacement transducers (SLVDTs), diagonally installed on the BCJ, to measure the shear deformations of the BCJ panel; (c) Strain gauges on the internal steel bars. From the experimental results, it became apparent that the PZT transducers successfully diagnosed the loading step at which the primary damage occurred in the first BCJ subassemblage and the damage state of the strengthened BCJ during the loading procedure. Further, data acquired from the diagonal SLVDTs and the strain gauges provided insight into the damage state of the two tested specimens at each step of the loading procedure and confirmed the diagnosis provided by the PZT transducers. Furthermore, data acquired by the PZT transducers, SLVDTs and strain gauges proved the effectiveness of the applied strengthening technique with C-FRP ropes externally mounted on the column and the conjunction area of the examined BCJ subassemblages.