Development of a Microwave Sensor for Solid and Liquid Substances Based on Closed Loop Resonator

Surrogate-Assisted Differential Evolution for the Design of Multimode Resonator Topology

The microstrip devices based on multimode resonators represent a class of electromagnetic microwave devices, promising use in tropospheric communication, radar, and navigation systems. The design of wideband bandpass filters, diplexers, and multiplexers with required frequency-selective properties, i.e., bandpass filters, is a complex problem, as electrodynamic modeling is a time-consuming and computationally intensive process. Various planar microstrip resonator topologies can be developed, differing in their topology type, and the search for high-quality structures with unique frequency-selective properties is an important research direction. In this study, we propose an approach for performing an automated search for multimode resonators' conductor topology parameters using a combination of evolutionary computation approach and surrogate modeling. In particular, a variant of differential evolution optimizer is applied, and the model of the target function landscape is built using Gaussian processes. At every iteration of the algorithm, the model is used to search for new high-quality solutions. In addition, a general approach for target function formulation is presented and applied in the proposed approach. The experiments with two microwave filters have demonstrated that the proposed algorithm is capable of solving the problem of tuning two types of topologies, namely three-mode resonators and six-mode resonators, to the required parameters, and the application of surrogated-assisted algorithm has significantly improved overall performance.

Microstrip Sensor Based on Ring Resonator Coupled with Double Square Split Ring Resonator for Solid Material Permittivity Characterization

This paper analyzes a microwave resonator sensor based on a square split-ring resonator operating at 5.122 GHz for permittivity characterization of a material under test (MUT). A single-ring square resonator edge (S-SRR) is coupled with several double-split square ring resonators to form the structure (D-SRR). The function of the S-SRR is to generate a resonant at the center frequency, whereas D-SRRs function as sensors, with their resonant frequency being very sensitive to changes in the MUT’s permittivity. In a traditional S-SRR, a gap emerges between the ring and the feed line to improve the Q-factor, but the loss increases as a result of the mismatched coupling of the feed lines. To provide adequate matching, the microstrip feed line is directly connected to the single-ring resonator in this article. The S-SRR’s operation switches from passband to stopband by generating edge coupling with dual D-SRRs located vertically on both sides of the S-SRR. The proposed sensor was designed, fabricated, and tested to effectively identify the dielectric properties of three MUTs (Taconic-TLY5, Rogers 4003C, and FR4) by measuring the microwave sensor’s resonant frequency. When the MUT is applied to the structure, the measured findings indicate a change in resonance frequency. The primary constraint of the sensor is that it can only be modeled for materials with a permittivity ranging from 1.0 to 5.0. The proposed sensors’ acceptable performance was achieved through simulation and measurement in this paper. Although the simulated and measured resonance frequencies have shifted, mathematical models have been developed to minimize the difference and obtain greater accuracy with a sensitivity of 3.27. Hence, resonance sensors offer a mechanism for characterizing the dielectric characteristics of varied permittivity of solid materials.

The Automatic Design of Multimode Resonator Topology with Evolutionary Algorithms

Microwave electromagnetic devices have been used for many applications in tropospheric communication, navigation, radar systems, and measurement. The development of the signal preprocessing units including frequency-selective devices (bandpass filters) determines the reliability and usability of such systems. In wireless sensor network nodes, filters with microstrip resonators are widely used to improve the out-of-band suppression and frequency selectivity. Filters based on multimode microstrip resonators have an order that determines their frequency-selective properties, which is a multiple of the number of resonators. That enables us to reduce the size of systems without deteriorating their selective properties. Various microstrip multimode resonator topologies can be used for both filters and microwave sensors, however, the quality criteria for them may differ. The development of every resonator topology is time consuming. We propose a technique for the automatic generation of the resonator topology with required frequency characteristics based on the use of evolutionary algorithms. The topology is encoded into a set of real valued parameters, which are varied to achieve the desired features. The differential evolution algorithm and the genetic algorithm with simulated binary crossover and polynomial mutation are applied to solve the formulated problem using the dynamic penalties method. The experimental results show that our technique enables us to find microstrip resonator topologies with desired amplitude-frequency characteristics automatically, and manufactured devices demonstrate characteristics very close to the results of the algorithm. The proposed algorithmic approach may be used for automatically exploring the new perspective topologies of resonators used in microwave filters, radar antennas or sensors, in accordance with the defined criteria and constraints.

Chipless RFID Sensing System for Precise Ethanol Determination in Alcoholic Solutions

The paper presents a new methodology to assess the ethanol content in water solutions. The system exploits a microwave resonator embedded in a polycarbonate sampling cell. The resonator frequency depends on the ethanol percentage and is monitored in real-time through a non-contacting probe. The method shows a precision better than 1% in ethanol percentage in the range of 1–30%, but can be applied also outside this range. Moreover, the methodology can be further improved or adapted for the analysis of other types of aqueous solutions or liquid mixtures upon evaluation of their dielectric properties.