Field Evaluation and Calibration of Low-Cost Air Pollution Sensors for Environmental Exposure Research

Assessing the impact of socioeconomic and environmental factors on mental health during the COVID-19 pandemic based on GPS-enabled mobile sensing and survey data

This study examines the impact of individual socioeconomic factors, living environment factors (e.g., housing conditions), and environmental exposures (e.g., greenspace) on people's mental health during the COVID-19 pandemic in Hong Kong. We measured the environmental exposures to greenspace, noise and air pollution using GPS tracking and mobile sensing data collected from survey participants, in addition to obtaining socioeconomic and living environment data from them using conventional survey questionnaires. We used an ordinal logistic regression model to determine the socioeconomic and environmental factors that are significantly associated with mental health outcomes. The results show that increased greenspace exposure is associated with a higher likelihood of better mental health outcomes, while both lower income level and home ownership with a mortgage are linked to lower odds of better mental health outcomes during the COVID-19 pandemic in Hong Kong. This research contributes to the existing literature by identifying the specific socioeconomic and environmental factors that significantly affect mental health outcomes during the COVID-19 pandemic.

Unveiling the potential of a novel portable air quality platform for assessment of fine and coarse particulate matter: in-field testing, calibration, and machine learning insights

Although low-cost air quality sensors facilitate the implementation of denser air quality monitoring networks, enabling a more realistic assessment of individual exposure to airborne pollutants, their sensitivity to multifaceted field conditions is often overlooked in laboratory testing. This gap was addressed by introducing an in-field calibration and validation of three PAQMON 1.0 mobile sensing low-cost platforms developed at the Mining and Metallurgy Institute in Bor, Republic of Serbia. A configuration tailored for monitoring PM2.5 and PM10 mass concentrations along with meteorological parameters was employed for outdoor measurement campaigns in Bor, spanning heating (HS) and non-heating (NHS) seasons. A statistically significant positive linear correlation between raw PM2.5 and PM10 measurements during both campaigns (R > 0.90, p ≤ 0.001) was observed. Measurements obtained from the uncalibrated NOVA SDS011 sensors integrated into the PAQMON 1.0 platforms exhibited a substantial and statistically significant correlation with the GRIMM EDM180 monitor (R > 0.60, p ≤ 0.001). The calibration models based on linear and Random Forest (RF) regression were compared. RF models provided more accurate descriptions of air quality, with average adjR2 values for air quality variables in the range of 0.70 to 0.80 and average NRMSE values between 0.35 and 0.77. RF-calibrated PAQMON 1.0 platforms displayed divergent levels of accuracy across different pollutant concentration ranges, achieving a data quality objective of 50% during both measurement campaigns. For PM2.5, uncertainty ( U r ) was below 50% for concentrations between 9.06 and 34.99 μg/m3 in HS and 5.75 and 17.58 μg/m3 in NHS, while for PM10, it stayed below 50% from 19.11 to 51.13 μg/m3 in HS and 11.72 to 38.86 μg/m3 in NHS.

Innovative Air-Preconditioning Method for Accurate Particulate Matter Sensing in Humid Environments

Smart cities rely on a network of sensors to gather real-time data on various environmental factors, including air quality. This paper addresses the challenges of improving the accuracy of low-cost particulate matter sensors (LCPMSs) which can be compromised by environmental conditions, such as high humidity, which is common in many urban areas. Such weather conditions often lead to the overestimation of particle counts due to hygroscopic particle growth, resulting in a potential public concern, although most of the detected particles consist of just water. The paper presents an innovative design for an indicative air-quality measuring station that integrates the particulate matter sensor with a preconditioning subsystem designed to mitigate the impact of humidity. The preconditioning subsystem works by heating the incoming air, effectively reducing the relative humidity and preventing the hygroscopic growth of particles before they reach the sensor. To validate the effectiveness of this approach, parallel measurements were conducted using both preconditioned and non-preconditioned sensors over a period of 19 weeks. The data were analyzed to compare the performance of the sensors in terms of accuracy for PM1, PM2.5, and PM10 particles. The results demonstrated a significant improvement in measurement accuracy for the preconditioned sensor, especially in environments with high relative humidity. When the conditions were too severe and both sensors started measuring incorrect values, the preconditioned sensor-measured values were closer to the actual values. Also, the period of measuring incorrect values was shorter with the preconditioned sensor. The results suggest that the implementation of air preconditioning subsystems in LCPMSs deployed in smart cities can provide a cost-effective solution to overcome humidity-related inaccuracies, thereby improving the overall quality of measured air pollution data.

Assessment of air pollution and air quality perception mismatch using mobility-based real-time exposure

Air pollution poses a threat to human health. Public perceptions of air pollution are important for individual self-protection and policy-making. Given the uncertainty faced by residence-based exposure (RB) measurements, this study measures individuals' real-time mobility-based (MB) exposures and perceptions of air pollution by considering people's daily movement. It explores how contextual uncertainties may influence the disparities in perceived air quality by taking into account RB and MB environmental factors. In addition, we explore factors that are related to the mismatch between people's perceived air quality and actual air pollution exposure. Using K-means clustering to divide the PM2.5 values into two groups, a mismatch happens when the perceived air quality is poor but the air pollution level is lower than 15.536μg/m3 and when the perceived air quality is good but the air pollution level is higher than 15.608μg/m3. The results show that there is a mismatch between air pollution exposure and perception of air pollution. People with low income are exposed to higher air pollution. Unemployed people and people with more serious mental health symptoms (e.g., depression) have a higher chance of accurately assessing air pollution (e.g., perceiving air quality as poor when air pollution levels are high). Older people and those with a higher MB open space density tend to underestimate air pollution. Students tend to perceive air quality as good. People who are surrounded by higher MB transportation land-use density and green space density tend to perceive air quality as poor. The results can help policymakers to increase public awareness of high air pollution areas, and consider the health effects of landscapes during planning.

Aerial monitoring of atmospheric particulate matter produced by open-pit mining using low-cost airborne sensors

Mining is an economic activity that entails the production and displacement of significant amounts of atmospheric particulate matter (PM) during operations involving intense earthcrushing or earthmoving. As high concentrations of PM may have adverse effects on human health, it is necessary to monitor and control the fugitive emissions of this pollutant. This paper presents an innovative methodology for the online monitoring of PM10 concentrations in air using a low-cost sensor (LCS, <300 USD) onboard an unmanned aerial vehicle. After comprehensive calibration, the LCS was horizontally flown over seven different areas of the large Riotinto copper mine (Huelva, Spain) at different heights to study the PM10 distribution at different longitudes and altitudes. The flights covered areas of zero activity, intense mining, drilling, ore loading, waste discharge, open stockpiling, and mineral processing. In the zero-activity area, the resuspension of PM10 was very low, with a weak wind speed (3.6 m/s). In the intense-mining area, unhealthy concentrations of PM10 (>51 μgPM10/m3) could be released, and the PM10 can reach surrounding populations through long-distance transport driven by several processes being performed simultaneously. Strong dilution was also observed at high altitudes (> 50 m). Mean concentrations were found to be 22-89 μgPM10/m3, with peaks ranging from 86 to 284 μgPM10/m3. This study demonstrates the potential applicability of airborne LCSs in the high-resolution online monitoring of PM in mining, thus supporting environmental managers during decision-making against fugitive emissions in a cost-effective manner.

Air pollution perception bias: Mismatch between air pollution exposure and perception of air quality in real-time contexts

Air pollution perception biases hinder the public's awareness of actual air quality. Past studies that examined the association and mismatch between actual and perceived air quality neglected individuals' dynamic exposure and their activity, travel, spatial, temporal, and social contexts. Using data collected with real-time air pollutant sensors and ecological momentary assessment (EMA), this study investigated the association and mismatch between momentary air pollution exposure and perceived air quality. It also examined how activity type, travel mode, spatial and temporal contexts, and social factors contribute to this disparity. The results show that exposure to air pollution is significantly higher in residential areas (1.777 μg/m3) and transportation land-use areas (2.863 μg/m3) compared to commercial areas. Exposure in the evening is 1.308 μg/m3 higher than in the afternoon. Working or studying activities are associated with 2.863 μg/m3 lower exposure, and individuals perceive air quality as good when working or studying and in residential areas. Conversely, individuals assess air quality as poor in railway travel contexts and being accompanied by friends. This study also reveals the nonstationary association between air pollution exposure and perceived air quality. The odds of underestimating air pollution are 1.8-2.7 times as high as that in residential areas and 2.1 to 2.6 times that in transportation land-use areas when compared to commercial areas. Implementing targeted mitigation measures in these contexts can enhance public awareness of air pollution.

Air pollution forecasting based on wireless communications: review

The development of contemporary artificial intelligence (AI) methods such as artificial neural networks (ANNs) has given researchers around the world new opportunities to address climate change and air quality issues. The small size, low cost, and low power consumption of sensors can facilitate obtaining the values of polluting gases in the atmosphere. However, several problems with using air pollution technique relate to various effects such as sensing accuracy, sensor drifts, and sluggish reactions to changes in pollution levels. Recently, machine learning has made it feasible to build a more intelligent, context-aware system that can anticipate events and monitor present conditions. This paper focuses on the use of environment sensors for detecting air pollution based on several types of wireless protocols, including Wi-Fi, Bluetooth, ZigBee, LoRa, Global Positioning System (GPS), and 4G/5G. Furthermore, it classifies previous published articles on the topic according to the wireless protocol and compared in terms of several performance metrics such as the adopted air pollution sensors, hardware platform, adopted algorithm, power consumption or power savings, and sensing accuracy. In addition, this work highlights the challenges and limitations facing drones during their mission for detecting air pollution. As a result, we suggest to build and implement at base station an intelligent system based on backpropagation (BP) neural networks, which provides flexibility to track and predict the true values of polluting gases in the atmosphere to overcome the above problems. Finally, this work addresses the advantages of using drones in the air pollution field.

Nonstationary relationships among individuals' concurrent exposures to noise, air pollution and greenspace: A mobility-based study using GPS and mobile sensing data

Individuals are often exposed to multiple environmental factors simultaneously. Understanding their joint effects is essential for developing effective public health policies. However, there has been a lack of research examining individuals' concurrent exposures to multiple environmental factors during people's daily mobility. To address this gap, this study investigated the relationships between and geographic patterns of individual exposures to air pollution (PM2.5), noise and greenspace using individual-level real-time GPS and mobile sensing data collected in outdoor environments. The findings indicate that the relationships between individual exposures to air pollution, noise and greenspace vary across different value ranges of exposures. The study also reveals that people's concurrent exposures to multiple environmental factors exhibit spatial nonstationary and strong clustering patterns. These results highlight the importance of considering spatial nonstationary and spatial heterogeneity of environmental exposures in understanding the relationships between multiple exposures in environmental health research.

How People's COVID-19 Induced-Worries and Multiple Environmental Exposures Are Associated with Their Depression, Anxiety, and Stress during the Pandemic

This study investigates how people's perceived COVID-19 risk, worries about financial hardship, job loss, and family conflicts, and exposures to greenspace, PM2.5, and noise (in people's residential neighborhoods and daily activity locations) are related to their depression, anxiety, and stress during the COVID-19 pandemic. Using a two-day activity-travel diary, a questionnaire, and real-time air pollutant and noise sensors, a survey was conducted to collect data from 221 participants living in two residential neighborhoods of Hong Kong during the COVID-19 pandemic. Linear regression was conducted to explore the relationships. Significant associations between people's COVID-19-related worries and exposures to grassland and PM2.5 with depression, anxiety, and stress were found in the results. These associations with depression, anxiety, and stress vary depending on people's demographic attributes. These results can help direct the public authorities' efforts in dealing with the public mental health crisis during the COVID-19 pandemic.

Examining individual-level tri-exposure to greenspace and air/noise pollution using individual-level GPS-based real-time sensing data

OBJECTIVE

Although exposure to air/noise pollution and greenspace has been found to significantly affect people's physical and mental health outcomes, there is still a lack of knowledge on what built-environment and socioeconomic factors are significantly associated with people's tri-exposure to air/noise pollution and greenspace. This study analyzes the associations between built-environment and socioeconomic factors and the tri-exposure to greenspace and air/noise pollution in Hong Kong.

METHOD

Based on individual-level activity data, real-time GPS trajectories, and exposure data collected by portable sensors as well as remote sensing satellite imagery, we employ multinomial logistic regression to determine the socioeconomic and built-environment factors that are significantly associated with the type of participants' tri-exposure at the grid cell level.

RESULTS

The results show that higher transit nodal accessibility, building density, building height and land-use mix are significantly associated with a higher likelihood of being disadvantaged in terms of tri-exposure to air/noise pollution and greenspace. While more advantageous tri-exposures are significantly related to higher median monthly household income and sky view factor.

CONCLUSION

Old high-rise high-density neighborhoods are more likely to be triply disadvantaged with low greenspace exposure but high air pollution and noise pollution exposure. The findings provide policymakers with critical reference in terms of addressing the inequalities in the tri-exposure outcomes.

Smart Multi-Sensor Calibration of Low-Cost Particulate Matter Monitors

A variety of low-cost sensors have recently appeared to measure air quality, making it feasible to face the challenge of monitoring the air of large urban conglomerates at high spatial resolution. However, these sensors require a careful calibration process to ensure the quality of the data they provide, which frequently involves expensive and time-consuming field data collection campaigns with high-end instruments. In this paper, we propose machine-learning-based approaches to generate calibration models for new Particulate Matter (PM) sensors, leveraging available field data and models from existing sensors to facilitate rapid incorporation of the candidate sensor into the network and ensure the quality of its data. In a series of experiments with two sets of well-known PM sensor manufacturers, we found that one of our approaches can produce calibration models for new candidate PM sensors with as few as four days of field data, but with a performance close to the best calibration model adjusted with field data from periods ten times longer.

Associations between COVID-19 risk, multiple environmental exposures, and housing conditions: A study using individual-level GPS-based real-time sensing data

Few studies have used individual-level data to explore the association between COVID-19 risk with multiple environmental exposures and housing conditions. Using individual-level data collected with GPS-tracking smartphones, mobile air-pollutant and noise sensors, an activity-travel diary, and a questionnaire from two typical neighborhoods in a dense and well-developed city (i.e., Hong Kong), this study seeks to examine 1) the associations between multiple environmental exposures (i.e., different types of greenspace, PM_2.5, and noise) and housing conditions (i.e., housing types, ownership, and overcrowding) with individuals' COVID-19 risk both in residential neighborhoods and along daily mobility trajectories; 2) which social groups are disadvantaged in COVID-19 risk through the perspective of the neighborhood effect averaging problem (NEAP). Using separate multiple linear regression and logistical regression models, we found a significant negative association between COVID-19 risk with greenspace (i.e., NDVI) both in residential areas and along people's daily mobility trajectories. Meanwhile, we also found that high open space and recreational land exposure and poor housing conditions were positively associated with COVID-19 risk in high-risk neighborhoods, and noise exposure was positively associated with COVID-19 risk in low-risk neighborhoods. Further, people with work places in high-risk areas and poor housing conditions were disadvantaged in COVID-19 risk.

Smart and Portable Air-Quality Monitoring IoT Low-Cost Devices in Ibarra City, Ecuador

Nowadays, increasing air-pollution levels are a public health concern that affects all living beings, with the most polluting gases being present in urban environments. For this reason, this research presents portable Internet of Things (IoT) environmental monitoring devices that can be installed in vehicles and that send message queuing telemetry transport (MQTT) messages to a server, with a time series database allocated in edge computing. The visualization stage is performed in cloud computing to determine the city air-pollution concentration using three different labels: low, normal, and high. To determine the environmental conditions in Ibarra, Ecuador, a data analysis scheme is used with outlier detection and supervised classification stages. In terms of relevant results, the performance percentage of the IoT nodes used to infer air quality was greater than 90%. In addition, the memory consumption was 14 Kbytes in a flash and 3 Kbytes in a RAM, reducing the power consumption and bandwidth needed in traditional air-pollution measuring stations.

Comparative Study on the Use of Some Low-Cost Optical Particulate Sensors for Rapid Assessment of Local Air Quality Changes

Official air quality (AQ) stations are sporadically located in cities to monitor the anthropogenic pollutant levels. Consequently, their data cannot be used for further locations to estimate hidden changes in AQ and local emissions. Low-cost sensors (LCSs) of particulate matter (PM) in a network can help in solving this problem. However, the applicability of LCSs in terms of analytical performance requires careful evaluation. In this study, two types of pocket-size LCSs were tested at urban, suburban and background sites in Budapest, Hungary, to monitor PM1, PM2.5, PM10, and microclimatic parameters at high resolutions (1 s to 5 min). These devices utilize the method of laser irradiation and multi-angle light scattering on air-suspended particulates. A research-grade AQ monitor was applied as a reference. The LCSs showed acceptable accuracy for PM species in indoor/outdoor air even without calibration. Low PM readings (<10 μg/m3) were generally handicapped by higher bias, even between sensors of the same type. The relative humidity (RH) slightly affected the PM readings of LCSs at RHs higher than 85%, necessitating field calibration. The air quality index was calculated to classify the extent of air pollution and to make predictions for human health effects. The LCSs were useful for detecting peaks stemming from emissions of motor vehicular traffic and residential cooking/heating activities.