Lamb Wave Detection for Structural Health Monitoring Using a ϕ-OTDR System

An SNR Enhancement Method for Φ-OTDR Vibration Signals Based on the PCA-VSS-NLMS Algorithm

To improve the signal-to-noise ratio (SNR) of vibration signals in a phase-sensitive optical time-domain reflectometer (Φ-OTDR) system, a principal component analysis variable step-size normalized least mean square (PCA-VSS-NLMS) denoising method was proposed in this study. First, the mathematical principle of the PCA-VSS-NLMS algorithm was constructed. This algorithm can adjust the input signal to achieve the best filter effect. Second, the effectiveness of the algorithm was verified via simulation, and the simulation results show that compared with the wavelet denoising (WD), Wiener filtering, variational mode decomposition (VMD), and variable step-size normalized least mean square (VSS-NLMS) algorithms, the PCA-VSS-NLMS algorithm can improve the SNR to 30.68 dB when the initial SNR is -1.23 dB. Finally, the PCA-VSS-NLMS algorithm was embedded into the built Φ-OTDR system, an 11.22 km fiber was measured, and PZT was added at 10.19-10.24 km to impose multiple sets of fixed-frequency disturbances. The experimental results show that the SNR of the vibration signal is 8.77 dB at 100 Hz and 0.07 s, and the SNR is improved to 26.17 dB after PCA-VSS-NLMS filtering; thus, the SNR is improved by 17.40 dB. This method can improve the SNR of the system's position information without the need to change the existing hardware conditions, and it provides a new scheme for the detection and recognition of long-distance vibration signals.

Health-Monitoring Systems for Marine Structures: A Review

This paper presents a comprehensive review of the state-of-the-art developments in health monitoring of marine structures. Monitoring the health of marine structures plays a key role in reducing the risk of structural failure. The authors establish the different sensors with their theoretical foundations and applications in order to determine the optimal position of the sensors on board. Once the data were collected, it was necessary to use for subsequent treatment; thus, the authors identified the different methodologies related to the treatment of data collected by the sensors. The authors provide a historical review of the location of different sensors depending on the type of ship and offshore platform. Finally, this review paper states the conclusions and future trends of this technology.

Automated Damage Detection Using Lamb Wave-Based Phase-Sensitive OTDR and Support Vector Machines

In this paper, we propose and demonstrate a damage detection technique based on the automatic classification of the Lamb wave signals acquired on a metallic plate. In the reported experiments, Lamb waves are excited in an aluminum plate through a piezoelectric transducer glued onto the monitored structure. The response of the monitored structure is detected through a high-resolution phase-sensitive optical time-domain reflectometer (ϕ-OTDR). The presence and location of a small perturbation, induced by placing a lumped mass of 5 g on the plate, are determined by processing the optical fiber sensor data through support vector machine (SVM) classifiers trained with experimental data. The results show that the proposed method takes full advantage of the multipoint sensing nature of the ϕ-OTDR technology, resulting in accurate damage detection and localization.