Fiber Optic-Based Durability Monitoring in Smart Concrete: A State-of-Art Review

Evaluation of Concrete Carbonation Based on a Fiber Bragg Grating Sensor

The carbonation of concrete greatly affects its service life. In this paper, fiber Bragg grating (FBG) sensors were used to investigate the relationship between concrete carbonation and its mechanical properties. A T130 High Sensitivity Strain Cable Sensor with a good linearity was used to monitor the internal strain in concrete, to investigate the variation in the elastic modulus of concrete with carbonation time. A mathematical model of elastic modulus and carbonation time of concrete based on FBG was established. At the same time, the authors explored the relationship between the carbonation depth and compressive strength of concrete and the carbonation time using a phenolphthalein solution test and a compressive strength test, respectively. The experimental results indicate that the carbonation depth, compressive strength, and elastic modulus of concrete increase with carbonation time. In the early stage of carbonation, these three parameters increase rapidly, while they grow slowly in the later stage of carbonation. The varying trend of the elastic modulus of concrete is consistent with the compressive strength, which shows a binomial relationship. Therefore, the elastic modulus, measured using FBG sensors, is used as an indicator of the characterization of the carbonation resistance of concrete. This work provides a new approach for concrete carbonation detection and assessment.

Assessment of the Influence of Protective Polymer Coating on Panda Fiber Performance Based on the Results of Multivariant Numerical Simulation

This article considers the deformation behavior of Panda optical fiber using different models of material behavior for the tasks of predicting residual stresses after drawing when cooling from 2000 °C to room temperature (23 °C) and indenting the fiber into an aluminum half-space at different parameters. These studies were conducted for single- and double-layer protective coatings (PCs), at different values of external load and thickness of single-layer PC. This paper determined the fields of residual stresses in the fiber formed during the drawing process. They are taken into account in modeling the fiber performance in the further process of this research. This article investigated two variants of PC behavior. The influence of behavior models and the number of covering layers on the deformation of the "fiber-half-space" system was analyzed. This paper establishes qualitative and quantitative regularities of the influence of the external load magnitude and relaxation properties of PCs on the deformation and optical characteristics of Panda optical fiber.