Magnetostrictive Microcantilever as an Advanced Transducer for Biosensors

Phage Display's Prospects for Early Diagnosis of Prostate Cancer

Prostate cancer (PC) is the second most diagnosed cancer among men. It was observed that early diagnosis of disease is highly beneficial for the survival of cancer patients. Therefore, the extension and increasing quality of life of PC patients can be achieved by broadening the cancer screening programs that are aimed at the identification of cancer manifestation in patients at earlier stages, before they demonstrate well-understood signs of the disease. Therefore, there is an urgent need for standard, sensitive, robust, and commonly available screening and diagnosis tools for the identification of early signs of cancer pathologies. In this respect, the "Holy Grail" of cancer researchers and bioengineers for decades has been molecular sensing probes that would allow for the diagnosis, prognosis, and monitoring of cancer diseases via their interaction with cell-secreted and cell-associated PC biomarkers, e.g., PSA and PSMA, respectively. At present, most PSA tests are performed at centralized laboratories using high-throughput total PSA immune analyzers, which are suitable for dedicated laboratories and are not readily available for broad health screenings. Therefore, the current trend in the detection of PC is the development of portable biosensors for mobile laboratories and individual use. Phage display, since its conception by George Smith in 1985, has emerged as a premier tool in molecular biology with widespread application. This review describes the role of the molecular evolution and phage display paradigm in revolutionizing the methods for the early diagnosis and monitoring of PC.

Strategies for Surface Immobilization of Whole Bacteriophages: A Review

Bacteriophage immobilization is a key unit operation in emerging biotechnologies, enabling new possibilities for biodetection of pathogenic microbes at low concentration, production of materials with novel antimicrobial properties, and fundamental research on bacteriophages themselves. Wild type bacteriophages exhibit extreme binding specificity for a single species, and often for a particular subspecies, of bacteria. Since their specificity originates in epitope recognition by capsid proteins, which can be altered by chemical or genetic modification, their binding specificity may also be redirected toward arbitrary substrates and/or a variety of analytes in addition to bacteria. The immobilization of bacteriophages on planar and particulate substrates is thus an area of active and increasing scientific interest. This review assembles the knowledge gained so far in the immobilization of whole phage particles, summarizing the main chemistries, and presenting the current state-of-the-art both for an audience well-versed in bioconjugation methods as well as for those who are new to the field.

A Review of Piezoelectric and Magnetostrictive Biosensor Materials for Detection of COVID-19 and Other Viruses

The spread of the severe acute respiratory syndrome coronavirus has changed the lives of people around the world with a huge impact on economies and societies. The development of wearable sensors that can continuously monitor the environment for viruses may become an important research area. Here, the state of the art of research on biosensor materials for virus detection is reviewed. A general description of the principles for virus detection is included, along with a critique of the experimental work dedicated to various virus sensors, and a summary of their detection limitations. The piezoelectric sensors used for the detection of human papilloma, vaccinia, dengue, Ebola, influenza A, human immunodeficiency, and hepatitis B viruses are examined in the first section; then the second part deals with magnetostrictive sensors for the detection of bacterial spores, proteins, and classical swine fever. In addition, progress related to early detection of COVID-19 (coronavirus disease 2019) is discussed in the final section, where remaining challenges in the field are also identified. It is believed that this review will guide material researchers in their future work of developing smart biosensors, which can further improve detection sensitivity in monitoring currently known and future virus threats.

Development of a High-Density Piezoelectric Micromachined Ultrasonic Transducer Array Based on Patterned Aluminum Nitride Thin Film

This study presents the fabrication and characterization of a piezoelectric micromachined ultrasonic transducer (pMUT; radius: 40 µm) using a patterned aluminum nitride (AlN) thin film as the active piezoelectric material. A 20 × 20 array of pMUTs using a 1 µm thick AlN thin film was designed and fabricated on a 2 × 2 mm² footprint for a high fill factor. Based on the electrical impedance and phase of the pMUT array, the electromechanical coefficient was ~1.7% at the average resonant frequency of 2.82 MHz in air. Dynamic displacement of the pMUT surface was characterized by scanning laser Doppler vibrometry. The pressure output while immersed in water was 19.79 kPa when calculated based on the peak displacement at the resonant frequency. The proposed AlN pMUT array has potential applications in biomedical sensing for healthcare, medical imaging, and biometrics.

Magnetostrictive Performance of Electrodeposited TbxDy(1-x)Fey Thin Film with Microcantilever Structures

The microfabrication with a magnetostrictive Tb_xDy_(1−x)Fe_y thin film for magnetic microactuators is developed, and the magnetic and magnetostrictive actuation performances of the deposited thin film are evaluated. The magnetostrictive thin film of Tb_xDy_(1−x)Fe_y is deposited on a metal seed layer by electrodeposition using a potentiostat in an aqueous solution. Bi-material cantilever structures with the Tb_0.36Dy_0.64Fe_1.9 thin-film are fabricated using microfabrication, and the magnetic actuation performances are evaluated under the application of a magnetic field. The actuators show large magnetostriction coefficients of approximately 1250 ppm at a magnetic field of 11000 Oe.

Magnetostriction in Amorphous Co66Fe34 Microcantilevers Fabricated with Hydrogenated Amorphous Silicon

To study the magnetostriction of Co66Fe34 thin films, amorphous silicon microcantilevers were prepared by surface micromachining, and the 136 nm-thick magnetostrictive film was deposited by electron beam physical vapor deposition and patterned on top of the microcantilever structure. The magnetostriction of the Co66Fe34 films was confirmed by measuring the deflection of the cantilevers under a varying magnetic field, reaching displacements up to 8 nm. The configuration was simulated using COMSOL software, yielding a similar deflection behavior as a function of the magnetic field, with a film with a magneto strictive coefficient of λ S ~ 55 p.p.m. The experimental configuration uses a laser and a position sensitive detector to measure the displacement, based on an optical lever configuration, and a piezoelectric stage to calibrate the system.

Landscape Phage: Evolution from Phage Display to Nanobiotechnology

The development of phage engineering technology has led to the construction of a novel type of phage display library-a collection of nanofiber materials with diverse molecular landscapes accommodated on the surface of phage particles. These new nanomaterials, called the "landscape phage", serve as a huge resource of diagnostic/detection probes and versatile construction materials for the preparation of phage-functionalized biosensors and phage-targeted nanomedicines. Landscape-phage-derived probes interact with biological threat agents and generate detectable signals as a part of robust and inexpensive molecular recognition interfaces introduced in mobile detection devices. The use of landscape-phage-based interfaces may greatly improve the sensitivity, selectivity, robustness, and longevity of these devices. In another area of bioengineering, landscape-phage technology has facilitated the development and testing of targeted nanomedicines. The development of high-throughput phage selection methods resulted in the discovery of a variety of cancer cell-associated phages and phage proteins demonstrating natural proficiency to self-assemble into various drug- and gene-targeting nanovehicles. The application of this new "phage-programmed-nanomedicines" concept led to the development of a number of cancer cell-targeting nanomedicine platforms, which demonstrated anticancer efficacy in both in vitro and in vivo experiments. This review was prepared to attract the attention of chemical scientists and bioengineers seeking to develop functionalized nanomaterials and use them in different areas of bioscience, medicine, and engineering.

A magnetoelastic biosensor based on E2 glycoprotein for wireless detection of classical swine fever virus E2 antibody

A wireless magnetoelastic (ME) biosensor immobilized with E2 glycoprotein was first developed to detect classical swine fever virus (CSFV) E2 antibody. The detection principle is that a sandwich complex of CSFV E2 - rabbit anti-CSFV E2 antibody - alkaline phosphatase (AP) conjugated goat anti-rabbit IgG formed on the ME sensor surface, with biocatalytic precipitation used to amplify the mass change of antigen-antibody specific binding reaction, induces a significant change in resonance frequency of the biosensor. Due to its magnetostrictive feature, the resonance vibrations and resonance frequency can be actuated and wirelessly monitored through magnetic fields. The experimental results show that resonance frequency shift increases with the augmentation of the CSFV E2 antibody concentration. Scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS) and fluorescence microscopy analysis proved that the modification and detection process were successful. The biosensor shows a linear response to the logarithm of CSFV E2 antibody concentrations ranging from 5 ng/mL to 10 μg/mL, with a detection limit (LOD) of 2.466 ng/mL and the sensitivity of 56.2 Hz/μg·mL-1. The study provides a low-cost yet highly-sensitive and wireless method for selective detection of CSFV E2 antibody.

Effect of Distributed Mass on the Node, Frequency, and Sensitivity of Resonant-Mode Based Cantilevers

We derived an analytical expression for a resonant-mode based bi-layered cantilever with distributed mass load. The behavior of mode of vibration, nodal position, frequency shift, as well as sensitivity under different mass load distributions was theoretically studied. The theoretical results suggested that asymmetric mass load distribution leads to the shift of nodes as well as the sensitive regions of a resonant-mode based cantilever. n - 1 local maximal sensitivities and n - 1 local minimal sensitivities are observed when the cantilever vibrates in the nth-order resonance. The maximal sensitivity is found at the first local maximal sensitivity and the behavior of mass load length as a function of the maximal sensitivity follows the rule of an exponent decaying function. The sensitivity increases as the load mass increases for the same mass load distribution, but the corresponding slopes are different.

Bacteriophages: biosensing tools for multi-drug resistant pathogens

Pathogen detection is of utmost importance in many sectors, such as in the food industry, environmental quality control, clinical diagnostics, bio-defence and counter-terrorism. Failure to appropriately, and specifically, detect pathogenic bacteria can lead to serious consequences, and may ultimately be lethal. Public safety, new legislation, recent outbreaks in food contamination, and the ever-increasing prevalence of multidrug-resistant infections have fostered a worldwide research effort targeting novel biosensing strategies. This review concerns phage-based analytical and biosensing methods targeted towards theranostic applications. We discuss and review phage-based assays, notably phage amplification, reporter phage, phage lysis, and bioluminescence assays for the detection of bacterial species, as well as phage-based biosensors, including optical (comprising SPR sensors and fiber optic assays), electrochemical (comprising amperometric, potentiometric, and impedimetric sensors), acoustic wave and magnetoelastic sensors.

Comprehensive Performance Study of Magneto Cantilevers as a Candidate Model for Biological Sensors used in Lab-on-a-Chip Applications

In recent years, demand for biological sensors which are capable of fast and accurate detection of minor amounts of pathogens in real-time form has been intensified. Acoustic wave (AW) devices whose performance is determined by mass sensitivity parameters and quality factor are used in biological sensors as platforms with high quality. Yet, current AW devices are facing many challenges such as the low value of their quality factor in practical applications and also their difficulty to use in liquids. The main focus of this article is to study on the magnetostrictive sensors which include milli/microcantilever (MSMC) type. In comparison with AW devices, MSMC has a lot of advantages; (1) its actuation and sensing unit is wirelessly controlled. (2) Its fabrication process is easy. (3) It works well in liquids. (4) It has a high-quality factor (in the air > 500). Simulation results demonstrate that the amount of quality factor depends on environment properties (density and viscosity), MSMC geometry, and its resonant behavior of harmonic modes.

Magnetostrictive particle based biosensors for in situ and real-time detection of pathogens in water

Biosensors for in situ detection of pathogenic bacteria in liquid are developed using magnetostrictive particles (MSP) as the sensor platform. The sensing elements used are phage E2 against Salmonella typhimurium, monoclonal antibody against Listeria monocytogenes, polyclonal antibody against Escherichia coli, and polyclonal antibody against Staphylococcus aureus, respectively. These biosensors were characterized in cultures with different populations ranging from 5 × 10(1) to 5 × 10(8)  cfu/mL. It is found that the MSP-based biosensors work well in water and have a rapid response with a response time in minutes, which makes the MSP-based sensors suitable for in situ and real-time detection of pathogenic bacteria in liquid. The experimental results show that all MSP-phage and MSP-antibody biosensors in size of 1.0 mm × 0.3 mm × 15 µm exhibit a detection limit better than 100 cfu/mL. Based on the Hill plot, it is concluded that each bacterial cell is bound onto the sensor surface through about four-to-five sites. When the cultures with low population (<10(6)  cfu/mL) are tested, both MSP-phage and MSP-antibody sensors exhibit the similar response. However, the phage-MSP sensors exhibit a higher capability in the capture of target bacterial cell.

Biosensors in the small scale: methods and technology trends

This study presents a review on biosensors with an emphasis on recent developments in the field. A brief history accompanied by a detailed description of the biosensor concepts is followed by rising trends observed in contemporary micro- and nanoscale biosensors. Performance metrics to quantify and compare different detection mechanisms are presented. A comprehensive analysis on various types and subtypes of biosensors are given. The fields of interest within the scope of this review are label-free electrical, mechanical and optical biosensors as well as other emerging and popular technologies. Especially, the latter half of the last decade is reviewed for the types, methods and results of the most prominently researched detection mechanisms. Tables are provided for comparison of various competing technologies in the literature. The conclusion part summarises the noteworthy advantages and disadvantages of all biosensors reviewed in this study. Furthermore, future directions that the micro- and nanoscale biosensing technologies are expected to take are provided along with the immediate outlook.

ANALYSIS OF AUXETIC BEAMS AS RESONANT FREQUENCY BIOSENSORS

The mechanics of beam vibration is of fundamental importance in understanding the shift of resonant frequency of microcantilever and nanocantilever sensors. Unlike the simpler Euler–Bernoulli beam theory, the Timoshenko beam theory takes into consideration rotational inertia and shear deformation. For the case of microcantilevers and nanocantilevers, the minute size, and hence low mass, means that the topmost deviation from the Euler–Bernoulli beam theory to be expected is shear deformation. This paper considers the extent of shear deformation for varying Poisson's ratio of the beam material, with special emphasis on solids with negative Poisson's ratio, which are also known as auxetic materials. Here, it is shown that the Timoshenko beam theory approaches the Euler–Bernoulli beam theory if the beams are of solid cross-sections and the beam material possess high auxeticity. However, the Timoshenko beam theory is significantly different from the Euler–Bernoulli beam theory for beams in the form of thin-walled tubes regardless of the beam material's Poisson's ratio. It is herein proposed that calculations on beam vibration can be greatly simplified for highly auxetic beams with solid cross-sections due to the small shear correction term in the Timoshenko beam deflection equation.

Design of compensation coils for EMI suppression in magnetostrictive linear position sensors

This paper presents recent development on magnetostrictive linear position sensors (MLPS). A new compensation coil structure improves the EMI suppression and accuracy considerably. Furthermore, experimental results indicate that the new structure can improve the accuracy to ± 0.13 mm nearly double the ± 0.2 mm obtained with traditional structures. As another design continuation after the differential waveguide structure, this new structure is a practical and reliable implementation technique for the commercialization of MLPS.

Bacteriophage based probes for pathogen detection

Rapid and specific detection of pathogenic bacteria is important for the proper treatment, containment and prevention of human, animal and plant diseases. Identifying unique biological probes to achieve a high degree of specificity and minimize false positives has therefore garnered much interest in recent years. Bacteriophages are obligate intracellular parasites that subvert bacterial cell resources for their own multiplication and production of disseminative new virions, which repeat the cycle by binding specifically to the host surface receptors and injecting genetic material into the bacterial cells. The precision of host recognition in phages is imparted by the receptor binding proteins (RBPs) that are often located in the tail-spike or tail fiber protein assemblies of the virions. Phage host recognition specificity has been traditionally exploited for bacterial typing using laborious and time consuming bacterial growth assays. At the same time this feature makes phage virions or RBPs an excellent choice for the development of probes capable of selectively capturing bacteria on solid surfaces with subsequent quick and automatic detection of the binding event. This review focuses on the description of pathogen detection approaches based on immobilized phage virions as well as pure recombinant RBPs. Specific advantages of RBP-based molecular probes are also discussed.

Design and analysis of a differential waveguide structure to improve magnetostrictive linear position sensors

Magnetostrictive linear position sensors (MLPS) are high-precision sensors used in the industrial field for measuring the propagation time of ultrasonic signals in a waveguide. To date, MLPS have attracted widespread attention for their accuracy, reliability, and cost-efficiency in performing non-contact, multiple measurements. However, the sensor, with its traditional structure, is susceptible to electromagnetic interference, which affects accuracy. In the present study, we propose a novel structure of MLPS that relies on two differential waveguides to improve the signal-to-noise ratio, common-mode rejection ratio, and accuracy of MLPS. The proposed sensor model can depict sensor performance and the relationship of sensor parameters. Experimental results with the new sensor indicate that the new structure can improve accuracy to ±0.1 mm higher than ±0.2 mm with a traditional structure. In addition, the proposed sensor shows a considerable improvement in temperature characteristics.

Recent advances in recognition elements of food and environmental biosensors: a review

A sensitive monitoring of contaminants in food and environment, such as chemical compounds, toxins and pathogens, is essential to assess and avoid risks for both, human and environmental health. To accomplish this, there is a high need for sensitive, robust and cost-effective biosensors that make real time and in situ monitoring possible. Due to their high sensitivity, selectivity and versatility, affinity-based biosensors are interesting for monitoring contaminants in food and environment. Antibodies have long been the most popular affinity-based recognition elements, however recently a lot of research effort has been dedicated to the development of novel recognition elements with improved characteristics, like specificity, stability and cost-efficiency. This review discusses three of these innovative affinity-based recognition elements, namely, phages, nucleic acids and molecular imprinted polymers and gives an overview of biosensors for food and environmental applications where these novel affinity-based recognition elements are applied.

Passive and self-powered autonomous sensors for remote measurements

Autonomous sensors play a very important role in the environmental, structural, and medical fields. The use of this kind of systems can be expanded for several applications, for example in implantable devices inside the human body where it is impossible to use wires. Furthermore, they enable measurements in harsh or hermetic environments, such as under extreme heat, cold, humidity or corrosive conditions. The use of batteries as a power supply for these devices represents one solution, but the size, and sometimes the cost and unwanted maintenance burdens of replacement are important drawbacks. In this paper passive and self-powered autonomous sensors for harsh or hermetical environments without batteries are discussed. Their general architectures are presented. Sensing strategies, communication techniques and power management are analyzed. Then, general building blocks of an autonomous sensor are presented and the design guidelines that such a system must follow are given. Furthermore, this paper reports different proposed applications of autonomous sensors applied in harsh or hermetic environments: two examples of passive autonomous sensors that use telemetric communication are proposed, the first one for humidity measurements and the second for high temperatures. Other examples of self-powered autonomous sensors that use a power harvesting system from electromagnetic fields are proposed for temperature measurements and for airflow speeds.

Evolution of phage display: from bioactive peptides to bioselective nanomaterials

BACKGROUND

New phage-derived biorecognition nanomaterials have emerged recently as a result of the in-depth study of the genetics and structure of filamentous phage and the evolution of phage display technology.

OBJECTIVE

This review focuses on the progress made in the development of these new nanomaterials and discusses the prospects of using phage as a bioselectable molecular recognition interface in medical and technical devices.

METHODS

The author used data obtained both in his research group and sourced using Science Citation Index (Web of Science) search resources.

RESULTS/CONCLUSION

The merging of phage display technologies with nanotechnology over the past few years has proved promising and has already shown its vitality and productivity by contributing vigorously to different areas of medicine and technology, such as medical diagnostics and monitoring, molecular imaging, targeted drug and gene delivery, vaccine development, as well as bone and tissue repair.