Cocrystal of Ibuprofen⁻Nicotinamide: Solid-State Characterization and In Vivo Analgesic Activity Evaluation

Trimethoprim-Based multicomponent solid Systems: Mechanochemical Screening, characterization and antibacterial activity assessment

In this work, multicomponent trimethoprim-based pharmaceutical solid systems were developed by mechanochemistry, using coformers from the GRAS list and other active pharmaceutical ingredients. The choice of coformers took into account their potential to increase the aqueous solubility/dissolution rate of TMP or its antibacterial activity. All the binary systems were characterized by thermal analysis, powder X-ray diffraction and infrared spectroscopy, and 3 equimolar systems with FTIR pointing to salts, and 4 eutectic mixtures were identified. The intrinsic dissolution rate of TMP in combination with nicotinic acid (a salt) and with paracetamol (eutectic mixture) were 25% and 5% higher than for pure TMP, respectively. For both Gram-positive and -negative strains, the antibacterial activity of TMP with some of the coformers was improved, since the dosage used was lower than the TMP control. A significant increase in antibacterial activity against E. coli was found for the eutectic mixture with curcumin, with the best results being obtained for the eutectic and equimolar mixtures with ciprofloxacin. Combining trimethoprim with coformers offers an interesting alternative to using trimethoprim alone: multicomponent forms with enhanced TMP dissolution rates were identified, as well as combinations showing enhanced antibacterial activity relatively to the pure drug.

Optimizing Drug Development: Harnessing the Sustainability of Pharmaceutical Cocrystals

Environmental impacts of the industrial revolution necessitate adoption of sustainable practices in all areas of development. The pharmaceutical industry faces increasing pressure to minimize its ecological footprint due to its significant contribution to environmental pollution. Over the past two decades, pharmaceutical cocrystals have received immense popularity due to their ability to optimize the critical attributes of active pharmaceutical ingredients and presented an avenue to bring improved drug products to the market. This review explores the potential of pharmaceutical cocrystals as an ecofriendly alternative to traditional solid forms, offering a sustainable approach to drug development. From reducing the number of required doses to improving the stability of actives, from eliminating synthetic operations to using pharmaceutically approved chemicals, from the use of continuous and solvent-free manufacturing methods to leveraging published data on the safety and toxicology, the cocrystallization approach contributes to sustainability of drug development. The latest trends suggest a promising role of pharmaceutical cocrystals in bringing novel and improved medicines to the market, which has been further fuelled by the recent guidance from the major regulatory agencies.

The bioavailability enhancement and insight into the action mechanism of poorly soluble natural compounds from co-crystals preparation: Oridonin as an example

BACKGROUND

Natural bioactive molecules are important sources for the development of new drugs. However, most of them were limited in clinical applications due to their low aqueous solubility and bioavailability. Oridonin (ORI) is a powerful anticancer compound with above characteristics.

OBJECTIVE

This study aimed to find an effective method to improve the bioavailability of poorly soluble natural compounds, and explore the action mechanisms of them to promote their application.

RESULTS

In this study, ORI-nicotinamide (NCT) cocrystal was successfully prepared for the first time to overcome the defects of ORI. The solubility and oral bioavailability of cocrystal (COC) increased 1.34 and 1.18 times compared with ORI. Moreover, MTT assay was applied to compare the cytotoxicity of positive control drug sorafenib with ORI and COC. The IC50 values of sorafenib, ORI and COC on HepG2 cells were 7.61, 8.79 and 7.36 nmol·mL-1, which indicated that the cytotoxicity of ORI could be enhanced by cocrystal preparation. The cellular metabolomics was innovatively introduced to gain insight into the difference of cytotoxicity mechanism between ORI and COC. The results showed that there were 78 metabolites with significant differences in content between the two groups, while these differential metabolites were related to 11 metabolic pathways. Among these, glycerophospholipid metabolism and cysteine and methionine metabolism were the significant differential pathways, and the downregulation of PC(14:0/16:1(9z)) and upregulation of homocysteine were the likely main reasons for higher cytotoxicity of COC.

CONCLUSIONS

This study has presented novel approaches for enhancing the bioavailability and drug efficacy of natural compounds, while also offering fresh insights into the underlying action mechanisms of pharmaceutical cocrystals.

Complexation: An Interesting Pathway for Combining Two APIs at the Solid State

Combining different drugs into a single crystal form is one of the current challenges in crystal engineering, with the number of reported multi-drug solid forms remaining limited. This paper builds upon an efficient approach to combining Active Pharmaceutical Ingredients (APIs) containing carboxylic groups in their structure with APIs containing pyridine moieties. By transforming the former into their zinc salts, they can be successfully combined with the pyridine-containing APIs. This work highlights the successfulness of this approach, as well as the improvement in the physical properties of the obtained solid forms.

Preparation and Physicochemical Characterizations of p-Methoxycinnamic acid – Succinic Acid Cocrystal by Solvent Evaporation Technique

Background: PMCA (p-Methoxycinnamic acid) is an active pharmaceutical ingredient derived from Kaempheria galanga L (known as kencur in Indonesia), which is poorly soluble in water. It can cause problems in the development of pharmaceutical dosage forms. Several methods have been carried out to increase the solubility of PMCA such as complex formation with β-cyclodextrin, or solid dispersion. The cocrystal formation method is a solubility enhancement method that has been developed recently. Aim: The aim of the study was the preparation and physicochemical characterization of PMCA co-crystal with succinic acid (SA) as its conformer by solvent evaporation technique. Methods: PMCA-SA cocrystal was made by the solvent evaporation method with a 1:1 molar ratio. Physicochemical characterization of PMCA and SA cocrystal was performed by differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and scanning electron microscope (SEM). Results: The DSC thermogram showed a decrease in the melting point of cocrystal compared to PMCA (173.55˚C), SA (187.55˚C), and its physical mixture (159.53˚C). The cocrystal thermogram displayed an endothermic peak at 158.46 ° C. Diffractogram of PMCA- SA cocrystal exhibited new diffraction peaks at an angle of 2θ = 21.92; 25.91 and 39.25˚ which was not found in the diffractogram of every single component nor its physical mixture. SEM photomicrograph showed PMCA-SA cocrystal as a rod-shaped crystal that had a different surface morphology and smaller size than the constituent materials. Conclusions: Based on the physicochemical characterization data above, it could be ascertained that PMCA-SA cocrystals had formed, these cocrystals were expected to increase the solubility of PMCA in water.

A molecularly enhanced proof of concept for targeting cocrystals at molecular scale in continuous pharmaceuticals cocrystallization

It is impossible to optimize a process for a target drug product with the desired profile without a proper understanding of the interplay among the material attributes, the process parameters, and the attributes of the drug product. There is a particular need to bridge the micro- and mesoscale events that occur during this process. Here, we propose а molecular engineering methodology for the continuous cocrystallization process, based on Raman spectra measured experimentally with a probe and from quantum mechanical calculations. Using molecular dynamics simulations, the theoretical Raman spectra were calculated from first principles for local mixture structures under an external shear force at various temperatures. A proof of concept is developed to build the process design space from the computed data. We show that the determined process design space provides valuable insight for optimizing the cocrystallization process at the nanoscale, where experimental measurements are difficult and/or inapplicable. The results suggest that our method may be used to target cocrystallization processes at the molecular scale for improved pharmaceutical synthesis.

Challenges and Progress in Nonsteroidal Anti-Inflammatory Drugs Co-Crystal Development

Co-crystal innovation is an opportunity in drug development for both scientists and industry. In line with the “green pharmacy” concept for obtaining safer methods and advanced pharmaceutical products, co-crystallization is one of the most promising approaches to find novel patent drugs, including non-steroidal anti-inflammatory drugs (NSAID). This kind of multi-component system improves previously poor physicochemical and mechanical properties through non-covalent interactions. Practically, there are many challenges to find commercially viable co-crystal drugs. The difficulty in selecting co-formers becomes the primary problem, followed by unexpected results, such as decreased solubility and dissolution, spring and parachute effect, microenvironment pH effects, changes in instability, and polymorphisms, which can occur during the co-crystal development. However, over time, NSAID co-crystals have been continuously updated regarding co-formers selection and methods development.

Challenges and opportunities of pharmaceutical cocrystals: a focused review on non-steroidal anti-inflammatory drugs

The focus of the review is to discuss the relevant and essential aspects of pharmaceutical cocrystals in both academia and industry with an emphasis on non-steroidal anti-inflammatory drugs (NSAIDs). Although cocrystals have been prepared for a plethora of drugs, NSAID cocrystals are focused due to their humongous application in different fields of medication such as antipyretic, anti-inflammatory, analgesic, antiplatelet, antitumor, and anti-carcinogenic drugs. The highlights of the review are (a) background of cocrystals and other solid forms of an active pharmaceutical ingredient (API) based on the principles of crystal engineering, (b) why cocrystals are an excellent opportunity in the pharma industry, (c) common methods of preparation of cocrystals from the lab scale to bulk quantity, (d) some latest case studies of NSAIDs which have shown better physicochemical properties for example; mechanical properties (tabletability), hydration, solubility, bioavailability, and permeability, and (e) latest guidelines of the US FDA and EMA opening new opportunities and challenges.

Multicomponent crystalline solid forms of aripiprazole produced via hot melt extrusion techniques: An exploratory study

Multicomponent crystalline solid forms (salts, cocrystals and eutectics) are a promising means of enhancing the dissolution behavior of poorly soluble drugs. The present study demonstrates the development of multicomponent solid forms of aripiprazole (ARP) prepared with succinic acid (SA) and nicotinamide (NA) as coformers using the hot melt extrusion (HME) technique. The HME-processed samples were characterized and analyzed using differential scanning calorimetry (DSC), hot stage microscopy (HSM), Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM). The DSC and HSM analyses revealed a characteristic single melting temperature in the solid forms, which differed from the melting points of the individual components. The discernible changes in the FTIR (amide C=O stretching) and PXRD results for ARP-SA confirm the formation of new crystalline solid forms. In the case of ARP-NA, these changes were less prominent, without the appearance or disappearance of peaks, suggesting no change in the crystal lattice. The SEM images demonstrated morphological differences between the HME-processed samples and the individual parent components. The in vitro dissolution and microenvironment pH measurement studies revealed that ARP-SA showed a higher dissolution rate, which could be due to the acidic microenvironment pH imparted by the coformer. The observations of the present study demonstrate the applicability of the HME technique for the development of ARP multicomponent solid forms.

Molecular engineering of cocrystallization process in holt melt extrusion based on kinetics of elementary molecular processes

Continuous co-crystallization in a twin-screw granulator is a promising technology. In order to fundamentally optimize the process flow, it is necessary to investigate the kinetics of molecular interactions within the mixture and the effect of these interactions on co-crystal formation. In this study, the processes governing the co-crystallization of ibuprofen and nicotinamide were considered. Density functional theory calculations employing the Hirshfeld partitioning scheme were used to identify donor-acceptor sites on each molecule. A total of twenty-one different molecular interactions was identified (nine of ibuprofen and nicotinamide (resembling co-crystals), three of ibuprofen and itself (resembling the ibuprofen dimer), and nine of nicotinamide and itself (resembling the nicotinamide dimer)). Each interaction was defined as an artificial reversible reaction and the kinetics were calculated using the transition state theory of chemical reactions, where linear and quadratic synchronous transition methods were utilized to identify transition-state structures; the minimum energy path was determined using the nudged elastic band method. A kinetic Monte Carlo framework was used to study the collective/coupled effect of reactions on the progress of the co-crystallization process. it was found that operating at low temperatures (especially lower or very close to the melting temperature of ibuprofen) for longer residency times creates a safe route for maximizing the presence of ibuprofen and nicotinamide co-crystals. If the proposed route is applied, the purity and properties of the produced co-crystal would be significant, especially its desirable availability within the body.

Amelioration of physicochemical, pharmaceutical, and pharmacokinetic properties of lornoxicam by cocrystallization with a novel coformer

OBJECTIVE

The present study was aimed to prepare and characterize new cocrystals of lornoxicam (LORX), a BCS class II drug employing 1,3-dimethyl urea (DMU) as a coformer to improve physicochemical, pharmaceutical, and pharmacokinetic performance.

METHODS

A screening study was conducted by employing three techniques viz. neat grinding, liquid-assisted grinding (LAG), and solvent evaporation (SE) using different drug-coformer molar ratios (1:1, 1:2, and 1:3). Samples were characterized by DSC, PXRD, ATR-FTIR, SEM, intrinsic dissolution rate (IDR) studies, compressional studies, and pharmacokinetic studies. In vitro dissolution and stability studies (25 °C/60%RH and 40 °C/75%RH for three months) were carried out for cocrystal tablets.

RESULTS

LAG and SE were found successful in ratio 1:3 and IDR showed approximately 28- and 19-fold increase, respectively in 0.1 N HCl (pH 1.2) and buffer (pH 7.4) as compared to pure LORX. The cocrystal exhibited good tabletability and was ∼2.5 times that of LORX at 6000 Psi. Dissolution profiles of tablets of cocrystal increased (56% and 100% at pH 1.2 and 7.4, respectively in contrast to those of physical mixture (PhyMix) (∼35% and ∼10%) and pure LORX (∼17% and ∼7%) within 60 min. The C_max and AUC_0-∞ for the selected cocrystal were significantly increased (p < 0.05) which was 2.4 and 2.5 times, respectively, that of LORX in a single dose oral pharmacokinetic study executed in rabbits. Tablets of cocrystal were found stable at both conditions.

CONCLUSION

The study indicates that cocrystallization with DMU can concomitantly improve tabletability, dissolution rate, and in vivo performance of dissolution limited drug LORX.

Cosmeceutical Aptitudes of Niacinamide: A Review

BACKGROUND

The prevalence and scope of dermatological illness differ from region to region. Based upon type and severity, the conditions may vary from superficial to deep systemic skin infections. Niacinamide, an amide analog of vitamin B3 which was conventionally utilized as a food supplement, is now explored for the management of skin disorders. Being a powerhouse on its own, it is not stored inside the body naturally and has to be acquired from external sources. Areas Covered: This review is an attempt to disclose the physiology, pharmacology, and highlight the dermatological potentials of niacinamide, discussing its pharmacological mechanisms, varied commercially available treatments, and novel approaches, i.e., in research and patented formulations.

RESULTS

Niacinamide has been verified in treating almost every skin disorder, viz. aging, hyperpigmentation, acne, psoriasis, pruritus, dermatitis, fungal infections, epidermal melasma, non-melanoma skin cancer, etc. It has been reported to possess numerous properties, for instance, anti-inflammatory, antimicrobial, antioxidant, antipruritic, and anticancer, which makes it an ideal ingredient for varied dermal therapies. Long term use of niacinamide, regardless of the skin type, paves the way for new skin cells, making skin healthier, brighter, and hydrated.

CONCLUSION

Niacinamide possesses a variety of positive characteristics in the field of dermatology. Novel approaches are warranted over current treatments which could bypass the above shortcomings and form an effective and stable system. Hence, niacinamide has the potential to become an individual and a productive component with wide future scope.

Improved Solubility and Dissolution Rates in Novel Multicomponent Crystals of Piperine with Succinic Acid

The objectives of this study were to prepare and characterize a novel piperine–succinic acid multicomponent crystal phase and to evaluate the improvement in the solubility and dissolution rate of piperine when prepared in the multicomponent crystal formation. The solid-state characterization of the novel multicomponent crystal was performed by powder X-ray diffraction (XRD), differential scanning calorimetry (DSC), and Fourier transform-infrared (FT-IR) spectroscopy. Solubility and dissolution rate profiles were evaluated in distilled water. The physical stability was evaluated under high relative humidity (75% and 100% RH). The determination of the single crystal X-ray diffraction structure revealed that this novel multicomponent crystal was a cocrystalline phase of piperine–succinic acid (2:1 molar ratio). The differential scanning calorimetry thermogram of the cocrystal showed a single and sharp endothermic peak at 110.49 °C. The cocrystal resulted in greater solubility and a faster dissolution rate of piperine than intact piperine. This improvement was a result of the formation of a channel structure in the cocrystal. In addition, the cocrystal was stable under a humid condition.

Characterizations and Assays of α-Glucosidase Inhibition Activity on Gallic Acid Cocrystals: Can the Cocrystals be Defined as a New Chemical Entity During Binding with the α-Glucosidase?

Cocrystallization with co-former (CCF) has proved to be a powerful approach to improve the solubility and even bioavailability of poorly water-soluble active pharmaceutical ingredients (APIs). However, it is still uncertain whether a cocrystal would exert the pharmacological activity in the form of a new chemical entity, an API-CCF supramolecule. In the present study, gallic acid (GA)-glutaric acid and GA-succinimide cocrystals were screened. The solubility, dissolution rate and oral bioavailability of the two cocrystals were evaluated. As expected, AUCs of GA-glutaric acid and GA-succinimide cocrystals were 1.86-fold and 2.60-fold higher than that of single GA, respectively. Moreover, experimental evaluations on α-glucosidase inhibition activity in vitro and theoretical simulations were used to detect whether the two cocrystals would be recognized as a new chemical entity during binding with α-glucosidase, a target protein in hypoglycemic mechanisms. The enzyme activity evaluation results showed that both GA and glutaric acid displayed α-glucosidase inhibition activity, and GA-glutaric acid cocrystals showed strengthened α-glucosidase inhibition activity at a moderate concentration, which is attributed to synergism of the two components. Molecular docking displayed that the GA-glutaric acid complex deeply entered the active cavity of the α-glucosidase in the form of a supramolecule, which made the guest-enzyme binding configuration more stable. For the GA and succinimide system, succinimide showed no enzyme inhibition activity, however, the GA-succinimide complex presented slightly higher α-glucosidase inhibition activity than that of GA. Molecular docking simulation indicated that the guest molecules entering the active cavity of the α-glucosidase were free GA and succinimide, not the GA-succinimide supramolecule.

Pharmaceutical Co-Crystallization: Regulatory Aspects, Design, Characterization, and Applications

Pharmaceutical co-crystals are novel class of pharmaceutical substances, which possess an apparent probability of advancement of polished physical properties offering stable and patentable solid forms. These multi-component crystalline forms influence pertinent physicochemical parameters like solubility, dissolution rate, chemical stability, physical stability, etc. which in turn result in the materials with superior properties to those of the free drug. Co-crystallization is a process by which the molecular interactions can be altered to optimize the drug properties. Co-crystals comprise a multicomponent system of active pharmaceutical ingredient (API) with a stoichiometric amount of a pharmaceutically acceptable coformer incorporated in the crystal lattice. By manufacturing pharmaceutical co-crystals, the physicochemical properties of a drug can be improved thus multicomponent crystalline materials have received renewed interest in the current scenario due to the easy administration in the pharmaceutical industry. There is an immense amount of literature available on co-crystals. However, there is a lack of an exhaustive review on a selection of coformers and regulations on co-crystals. The review has made an attempt to bridge this gap. The review also describes the methods used to prepare co-crystals with their characterization. Brief description on the pharmaceutical applications of co-crystals has also been incorporated here. Efforts are made to include reported works on co-crystals, which further help to understand the concept of co-crystals in depth.

The first zwitterionic cocrystal of indomethacin with amino acid showing optimized physicochemical properties as well as accelerated absorption and slowed elimination in vivo

The first zwitterionic cocrystal of indomethacin (INC) with proline (PL) with optimized in vitro/in vivo properties was prepared and characterized.

Cocrystallization of 5-fluorouracil and l-phenylalanine: the first zwitterionic cocrystal of 5-fluorouracil with amino acid exhibiting perfect in vitro/vivo pharmaceutical properties

The first zwitterionic cocrystal of 5-fluorouracil with amino acid has been prepared and its structure and in vitro/vivo properties have been systematically studied.

Synthesis and characterization of a (+)-catechin and L-(+)-ascorbic acid cocrystal as a new functional ingredient for tea drinks

Tea (Camellia Sinensis) is one of the most popular drink, consumed as infusion or bottled ready to drink beverages. Although tea leaves contain many antioxidants compounds, after processing they can drastically decrease, sometimes up to a full degradation, as in the case of catechin, a very healthy flavan-3-ol. In this context, the synthesis of a cocrystal between (+)-catechin and L-(+)-ascorbic acid, was proved to be a useful strategy to make a new ingredient able to ameliorate the antioxidant profile of both infusions and bottled teas. The obtained cocrystal showed a three-fold higher solubility than (+)catechin and its formation was elucidated unambiguously by FT-IR, thermal (DSC) and diffraction (PXRD) analyses. Antioxidant characteristics of the samples were evaluated by colorimetric assays. As expected, infusions showed much better antioxidant features than ready-to-use lemon and peach teas. The same trend was confirmed after the addition of the cocrystal at two concentration levels. In particular, supplementation at concentration of 2 mg mL-1 improved the bottled tea antioxidant values to the level showed by the not-added infusion tea.

Impact of polymeric excipient on cocrystal formation via hot-melt extrusion and subsequent downstream processing

Pharmaceutical cocrystals have gained increasing interest due to their potential to modify the physicochemical properties of drugs. Herein, a 1:1 cocrystal of ibuprofen (IBU) as a BCS class II active pharmaceutical ingredient (API) and nicotinamide as coformer was produced using a hot-melt extrusion (HME) process. The effect of process parameters such as barrel temperature and screw speed were studied. It was shown that the addition of polymeric excipient such as soluplus (Sol) decreases the cocrystallization temperature by enhancing the interaction between API and coformer. In order to study the effect of cocrystallization on the tableting properties of IBU-NIC cocrystal, 5 different formulations of pure IBU, IBU-NIC cocrystal, IBU-NIC physical mixture, IBU-NIC-Sol physical mixture and IBU-NIC-Sol cocrystal were tableted by a compaction simulator. Tabletability, compactibility and compressibility were investigated. The sample with IBU-NIC-Sol cocrystal formulation outperformed all the other formulations in terms of tabletability, compactibility and compressibility. Interestingly, this sample was even superior to the IBU-NIC cocrystal sample which verified the advantageous effect of the presence of an excipient. Moreover, dissolution test confirmed a noticeable increase in the dissolution of not only the cocrystal samples but even the physical mixtures of IBU and NIC compared with pure IBU.