Eco-Friendly and Sensitive HPLC and TLC Methods Validated for the Determination of Betahistine in the Presence of Its Process-Related Impurity

Potentiometric Sensor Arrays Based on Hybrid PFSA/CNTs Membranes for the Analysis of UV-Degraded Drugs

The degradation of drugs is a substantial problem since it affects the safety and effectiveness of pharmaceutical products, as well as their influence on the environment. A novel system of three potentiometric cross-sensitive sensors (using the Donnan potential (DP) as an analytical signal) and a reference electrode was developed for the analysis of UV-degraded sulfacetamide drugs. The membranes for DP-sensors were prepared by a casting procedure from a dispersion of perfluorosulfonic acid (PFSA) polymer, containing carbon nanotubes (CNTs), whose surface was preliminarily modified with carboxyl, sulfonic acid, or (3-aminopropyl)trimethoxysilanol groups. A correlation between the sorption and transport properties of the hybrid membranes and cross-sensitivity of the DP-sensor to sulfacetamide, its degradation product, and inorganic ions was revealed. The analysis of the UV-degraded sulfacetamide drugs using the multisensory system based on hybrid membranes with optimized properties did not require a pre-separation of the components. The limits of detection of sulfacetamide, sulfanilamide, and sodium were 1.8 × 10^-7, 5.8 × 10^-7, and 1.8 × 10^-7 M. The relative errors of the determination of the components of the UV-degraded sulfacetamide drugs were 2-3% (at 6-8% relative standard deviation). PFSA/CNT hybrid materials provided the stable work of the sensors for at least one year.

A Turn-On–Type Fluorescence Resonance Energy Transfer Eco-friendly Method for Nitazoxanide Quantification in Pharmaceutical Dosage Form and Spiked Plasma: Evaluation of Greenness Profile Using Different Assessment Tools

A brand-new class of anti-infective drugs that work against bacteria, viruses, and protozoan parasites is nitazoxanide and related thiazolides. Thiazolides have also been shown to cause cell cycle arrest and apoptotic cell death in cancer cells in recent years. In this study, an eco-friendly, spectrofluorimetric technique that is verified, easy, and sensitive has been proposed for quantifying nitazoxanide (NTZ), a broad-spectrum antiparasitic drug. When NTZ is reduced with zinc (Zn) powder in an acidic media, a highly fluorescent product is produced. To get the highest sensitivity, different experimental conditions impacting the response were examined and optimized. Following excitation at 299 nm, scanning of the fluorescent product was done at 440 nm. The intensity of the fluorescence was proportional to the drug concentration in the range of 0.1–0.6 μg/mL. The approach was validated according to International Conference on Harmonization (ICH) guidelines, and the outcome was satisfactory. The detection and quantitation limits were calculated to be 0.013 and 0.038 μg/mL, respectively. The suggested technique was successful in analyzing commercially available NTZ dosage forms. Furthermore, the proposed technique was used to assess NTZ levels in human plasma and it was bio-analytically validated according to European Medicines Agency (EMA) guidelines. The suggested method can be used in quality control laboratories as well as in pharmacokinetic studies. In order to picture the green profile of the developed method, four greenness assessment tools have been applied. National Environmental Methods Index (NEMI), analytical Eco-Scale Assessment (ESA), Green Analytical Procedure Index (GAPI) and Analytical Greenness metric (AGREE) are the relatively most widely used metrics. So, they were utilized to perform a detailed greenness comparison between the proposed method and some of the reported methods for the determination of NTZ. The developed method was found to be an excellent green method with the highest AGREE score.

Green Spectrophotometric Platforms for Resolving Overlapped Spectral Signals of Recently Approved Antiparkinsonian Drug (Safinamide) in the Presence of Its Synthetic Precursor (4-Hydroxybenzaldehyde): Applying Ecological Appraisal and Comparative Statistical Studies

BACKGROUND

Safinamide, a highly specific inhibitor of monoamine oxidase B, is a new approved prodigious therapy used to cure Parkinson's disease (PD).

OBJECTIVE

Before marketing and selling a medicine, manufacturers must guarantee that the manufacturing process is consistent by monitoring levels of process-related chemicals and drug contaminants. Therefore, five precise, fast, and accurate spectrophotometric techniques were employed and evaluated for the simultaneous measurement of safinamide and its synthetic precursor, 4-hydroxybenzaldehyde.

METHODS

The first derivative, derivative ratio, ratio difference, dual wavelength, and Fourier self-deconvolution methods worked well to resolve spectral overlap of safinamide and its synthetic precursor, 4-hydroxybenzaldehyde.

RESULTS

Safinamide detection limits ranged from 0.598 to 1.315 µg/mL, whereas the 4-hydroxybenzaldehyde detection limit was found to be as low as 0.327 µg/mL.

CONCLUSION

According to International Council for Harmonisation (ICH) criteria, all procedures were verified and confirmed to be accurate, robust, repeatable, and precise within reasonable range. No considerable variation was found when comparing the outcomes of the suggested approaches to the findings of previously published methods. The ecological value of established methods was measured: the national environmental methods index (NEMI), the analytical eco-scale, the analytical greenness metric (AGREE), and the green analytical process index (GAPI) were used.

HIGHLIGHTS

This is the first spectrophotometric determination of safinamide drug in the presence of its synthetic precursor. Five simple and efficient spectrophotometric approaches were employed to determine a newly approved antiparkinsonian drug in the presence of its synthetic precursor simultaneously. Ecological appraisal was performed for the developed methods using four assessment tools.

Design of an Experimental Study for the Simultaneous Determination of Cefepime, Piperacillin and Tazobactam Using Micellar Organic Solvent-Free HPLC

Application of Sustainable analytical chemistry concepts has become crucial in order to remove the environmentally harmful impacts originating from the routine use of analytical techniques. Here, a new LC method is developed and its parameters are analyzed, depending on a mixed micellar mobile phase. This was primarily aimed at getting rid of the use of organic solvents in conventional routine analyses. Combinations of tazobactam (TZB) with piperacillin (PPC) or cefepime (CFM) are commonly used as effective antimicrobial therapies, especially for resistant strains. Therefore, the three drugs were separated and quantified using an organic solvent-free mobile phase. The mixed micellar mobile phase was comprised of 15 mM Brij-35 with 38 mM SDS, adjusted to pH 3.5. Separation was performed by HPLC on monolithic RP-C18 column Chromolith® Performance RP-18e (100 mm × 4.6 mm) at a rate of 1 mL per minute of flow in conjunction with a measurement wavelength 210 nm. The method was found valid and applicable in accordance of precision, and accuracy within ranges of 5–100 µg mL−1 for PPC and CFM and of 0.625–12.5 µg mL−1 for TZB. The quality-by-design technique was used to analyze the effect of modifying the mixed micellar ratios on separation efficiency and conclude their behavior. Finally, the suggested approach was assessed applying the green analytical procedure index against the greenest published methodology to show superiority.

Highly sensitive high-performance thin-layer chromatography method for the simultaneous determination of Molnupiravir, Favipiravir, and Ritonavir in pure forms and pharmaceutical formulations

Favipiravir, molnupiravir, and ritonavir have been recently approved as the first oral antivirals for treatment of SARS-CoV-2 viral infections. Their combination was reported in several clinical studies, alternatively, to enhance the viral eradication and improve patient's recovery times and rates. Being all orally administered, therefore, developing new sensitive and validated methodologies for their simultaneous determination is a necessitate. In the proposed research, a sensitive, selective and simple high-performance thin layer chromatography method was developed and validated for determination of favipiravir, molnupiravir, and ritonavir. Silica gel 60F254 thin layer chromatography plates were used as stationary phase for this separation using mobile phase composed of methylene chloride: ethyl acetate: methanol: 25% ammonia (6:3:4:1, v/v/v/v). Densitometric detection was performed at wavelength 289nm. Peaks of favipiravir, molnupiravir, and ritonavir were resolved at retention factors 0.22, 0.42 and 0.63, respectively. The proposed method was found linear within the specified ranges of 3.75-100.00 μg/mL for molnupiravir and favipiravir, and 2.75-100.00 μg/mL for ritonavir. Limits of detection were found to be 1.12, 1.21, and 0.89 μg/mL for favipiravir, molnupiravir, and ritonavir, respectively. This is the first method to be reported for the simultaneous determination of the cited three antiviral drugs. The method was assessed on novel greenness metrics. This article is protected by copyright. All rights reserved.