Removal of Patent Blue (V) Dye Using Indian Bael Shell Biochar: Characterization, Application and Kinetic Studies

Low-temperature oxidative removal of benzene from the air using titanium carbide (MXene)-Supported platinum catalysts

MXenes are an emerging class of two-dimensional (2D) inorganic materials with great potential for versatile applications such as adsorption and catalysis. Here, we describe the synthesis of a platinized titanium carbide MXene (Pt@Ti3C2) catalyst with varying amounts of platinum (0.1%-2 wt.%) for the low-temperature oxidation of benzene, an aromatic volatile organic compound often found in industrial flue gas. A 1% formulation of Pt@Ti3C2-R allowed near-complete (97%) oxidation of benzene to CO2 at 225 °C with a steady-state reaction rate (r) of 0.119 mol g-1·h-1. This low-temperature catalytic oxidation reaction was promoted by an increase in the lattice oxygen (O*)/Pt2+ species (active sites) of 1%Pt@Ti3C2-R from 45.3/34.6% to 71.0/61.1% through pre-thermal reduction under H2 flow, as revealed by X-ray photoelectron spectroscopy, temperature-programmed reduction, and in situ diffuse reflectance infrared Fourier transform spectroscopy analyses. The cataltyic activity of 1% Pt@Ti3C2-R against benzene was assessed under the control of the key process variables (e.g., catalyst mass, flow rate, benzene concentration, relative humidity, and time-on-stream) to help optimize the oxidation reaction process. The results provide new insights into the use of platinum-based 2D MXene catalysts for low-temperature oxidative removal of benzene from the air.

Application of a manganese dioxide/amine-functionalized metal-organic framework nanocomposite as a bifunctional adsorbent-catalyst for the room-temperature removal of gaseous aromatic hydrocarbons

A high surface area (883 m2·g-1) nanocomposite composed of an amine-functionalized metal-organic framework (NH2-UiO-66 (U6N)) and manganese dioxide (MnO2@U6N) was prepared as bifunctional adsorbent-catalyst for the purification of multiple aromatic volatile organic compounds (VOCs) such as benzene (B), toluene (T), m-xylene (X), and styrene (S), i.e., BTXS. The performance of MnO2@U6N was assessed for BTXS removal both as single- and multi-component systems at room temperature (RT (20 °C)) under dark conditions. MnO2@U6N exhibited superior catalytic-adsorption activity for the RT removal of BTXS. The removal performance of MnO2@U6N against BTXS was then assessed across varying levels of flow rate, VOC concentration, adsorbent/catalyst mass, and relative humidity. To better understand the catalytic-adsorption activity, two types of non-linear kinetic models (pseudo-first-order and pseudo-second-order) were utilized to simulate the experimentally obtained data. In-situ diffuse reflectance infrared Fourier-transform spectroscopy (DRIFTS) analysis was also conducted to interpret the removal mechanism of BTXS. Their adsorption capacity (mg·g-1) values are estimated to increase in the order of B (21.1) < T (66.0) < X (79.1) < S (129.7). It is suggested that the adsorbed aromatic VOC molecules on the surface of MnO2@U6N should react with active oxygen species (lattice and adsorbed oxygen) to yield the environmentally benigh end products (i.e., carbon dioxide and water) along with various intermediates (e.g., alkoxides, aldehydes, phenolates, carboxylates, and anhydrides). Accordingly, the VOC removal potential of MnO2@U6N has been validated through the synergistic combination between adsorption (primary process) and catalysis (subordinate process) at RT.

Magnetic ZnFe2O4 composite advances SERS assay for Patent blue V

BACKGROUND

Patent blue V (PbV) an Azo colorant because of its high toxicity to children has been severely limited in food industry. However, frequently the abuse of PbV in some artificial foods is still exposed by media. Current methods for the detection of PbV have to perform tedious pre-processing and the detection sensitivity and speed are required to be further improved.

RESULTS

In this work, we immobilize gold nanoparticles (Au NPs) on the surface of ZnFe2O4 with aid of Inositol hexaphosphate (IP6) to prepare a novel magnetic surface-enhanced Raman scattering (SERS) substrate (designated as ZnFe2O4-IP6-Au NPs) for rapid detection of PbV in beverages. Synergistic effect of magnetic enrichment, magnetic inducing improvement effect (MIIE) and efficient charge transfer (CT) enables ZnFe2O4-IP6-Au NPs-based SERS assay to achieve limit of detection of PbV down to 1.31 × 10-8 mol/L and a concentration linear relationship ranging from 8.6 × 10-4 to 8.6 × 10-8 mol/L. The detection recoveries for PbV in beverages locate in the range from 98.1 to 102.5 %, meaning the feasibility of method. In addition, the presence of IP6 protection greatly improves the storage stability of ZnFe2O4-IP6-Au NPs.

SIGNIFICANCE

ZnFe2O4-IP6-Au NPs substrates with excellent SERS performance could on-site, rapidly and sensitively detect PbV. As a perspective, magnetic-composite-based SERS assay has great scenario in food safety by using portable Raman spectrometer.

Agrowaste-generated biochar for the sustainable remediation of refractory pollutants

The rapid growth of various industries has led to a significant, alarming increase in recalcitrant pollutants in the environment. Hazardous dyes, heavy metals, pesticides, pharmaceutical products, and other associated polycyclic aromatic hydrocarbons (such as acenaphthene, fluorene, fluoranthene, phenanthrene, and pyrene) have posed a significant threat to the surroundings due to their refractory nature. Although activated carbon has been reported to be an adsorbent for removing contaminants from wastewater, it has its limitations. Hence, this review provides an elaborate account of converting agricultural waste into biochar with nanotextured surfaces that can serve as low-cost adsorbents with promising pollutant-removing properties. A detailed mechanism rationalized that this strategy involves the conversion of agrowaste to promising adsorbents that can be reduced, reused, and recycled. The potential of biowaste-derived biochar can be exploited for developing biofuel for renewable energy and also for improving soil fertility. This strategy can provide a solution to control greenhouse gas emissions by preventing the open burning of agricultural residues in fields. Furthermore, this serves a dual purpose for environmental remediation as well as effective management of agricultural waste rich in both organic and inorganic components that are generated during various agricultural operations. In this manner, this review provides recent advances in the use of agrowaste-generated biochar for cleaning the environment.

Enhanced artificial intelligence for electrochemical sensors in monitoring and removing of azo dyes and food colorant substances

It is necessary to determine whether synthetic dyes are present in food since their excessive use has detrimental effects on human health. For the simultaneous assessment of tartrazine and Patent Blue V, a novel electrochemical sensing platform was developed. As a result, two artificial azo colorants (Tartrazine and Patent Blue V) with toxic azo groups (-NN-) and other carcinogenic aromatic ring structures were examined. With a low limit of detection of 0.06 μM, a broad linear concentration range 0.09μM to 950μM, and a respectable recovery, scanning electron microscopy (SEM) was able to reveal the excellent sensing performance of the suggested electrode for patent blue V. The electrochemical performance of an electrode can be characterized using cyclic and differential pulse voltammetry, and electrochemical impedance spectroscopy. Moreover, the classification model was created by applying binary classification assessment using enhanced artificial intelligence comprises of support vector machine (SVM) and Genetic Algorithm (GA), respectively, a support vector machine and a genetic algorithm, which was then validated using the 50 dyes test set. The best binary logistic regression model has an accuracy of 83.2% and 81.1%, respectively, while the best SVM model has an accuracy of 90.3% for the training group of samples and 81.1% for the test group (RMSE = 0.644, R2 = 0.873, C = 205.41, and = 5.992). According to the findings, Cu-BTC MOF (copper (II)-benzene-1,3,5-tricarboxylate) has a crystal structure and is tightly packed with hierarchically porous nanomaterials, with each particle's edge measuring between 20 and 37 nm. The suggested electrochemical sensor's analytical performance is suitable for foods like jellies, condiments, soft drinks and candies.

Effective Removal of Acid Dye in Synthetic and Silk Dyeing Effluent: Isotherm and Kinetic Studies

Here, we propose a low-cost, sustainable, and viable adsorbent (pine tree-derived biochar) to remove acid dyes such as acid violet 17 (AV), which is used in the silk dyeing industry. As a case study, the AV removal process was demonstrated using synthetic effluent and further as a proof of concept using real dye effluent produced from the Sirumugai textile unit in India. The pine tree-derived biochar was selected for removal of aqueous AV dye in batch and fixed-bed column studies. The adsorbent material was characterized for crystallinity (XRD), surface area (BET), surface morphology and elemental compositions (SEM-EDX), thermal stability (TGA), weight loss (DGA), and functional groups (FTIR). Batch sorption studies were performed to evaluate (i) adsorption at various pH values (at pH 2 to 7), (ii) isotherms (at 10, 25, and 35 °C) to assess the temperature effect on the sorption efficiency, and (iii) kinetics to reveal the effect of time, adsorbent dose, and initial concentration on the reaction rate. After systematic evaluation, 2 g/L biochar, 25 mg/L AV, pH 3, 40 °C, and 40 and 360 min in a completely mixed batch study resulted in 50 and 90% dye removal, respectively. The isoelectric point at pH 3.7 ± 0.2 results in maximum dye removal, therefore suggesting that monitoring the ratio of different effluent (acid/wash/dye) can improve the colorant removal efficiency. The Langmuir isotherm best fits with the sorption of AV to biochar, provided a maximal dye uptake of 29 mg/g at 40 °C, showing that adsorption was endothermic. Fixed-bed studies were conducted at room temperature with an initial dye concentration of 25 and 50 mg/L. The glass columns were packed with biochar (bed depth 20 cm, pore volume = 14 mL) at an initial pH of 5.0 and a 10 mL/min flow rate for 120 min. Finally, the regeneration of the adsorbent was achieved using desorption studies conducted under the proposed experimental conditions resulted in 90-93% removal of AV even after five cycles of regeneration.

Highly efficient bio-adsorption of Malachite green using Chinese Fan-Palm Biochar (Livistona chinensis)

The discharge of effluents from the textile industry is a multidimensional problem that affects the ecosystem in many ways. Though many new technologies are being developed, it remains to be seen which of those can be practiced in a real scenario. The current investigation attempts to absorb the Malachite Green, an effluent from textile dye using Chinese Fan Palm Seed Biochar. Accordingly, biochar was prepared using fruits of Chinese Fan Palm (Livistona chinensis) tree. The fruit also yielded a significant amount of biochar and bio-oil. 1.346 kg of fresh and cleaned fruit was fast pyrolyzed at 500 °C in a laboratory-scale Pyrolyzer resulting in 0.487 kg of biochar and 0.803 L of bio-oil. The remaining fruit matter was converted to gaseous products. The kinetics of dye removal were studied and the parameters were determined. The study advocates that the Langmuir isotherm model simulates the adsorption experiment, to a good extent. From the plot, the maximum (monolayer) adsorption capacity, Q_m was determined to be 21.4 mg/g. The suitability of the Langmuir isotherm model onto biochar was established by the high correlation coefficient, R² that was higher than 0.97.

Glutaraldehyde-cross-linked chitosan-alginate composite for organic dyes removal from aqueous solutions

We present an approach for synthesis of a micro-porous composite of two well-known biopolymers, namely chitosan and alginate, using glutaraldehyde as the cross-linking agent. Alginate and chitosan were pre-treated before being mixed, and the two biopolymers' proportions were also monitored. Chitosan was modified using aniline with the help of formaldehyde crosslinker and then the twizer was further crosslinked with alginate using glutaraldehyde. The synthesized composite, glutaraldehyde cross-linked chitosan-alginate composite [(Cs-F-An)-G-Al] was characterized using spectral techniques and employed as a potential adsorbent for three dyes namely Brilliant green, Methyl orange and Patent Blue V. The pH_PZC of the material was 7.5 and the maximum monolayer adsorption capacity (Q_max) was found to be 235.82, 198.09 and 117.34 mg g^-1 for BG (at pH 8.0), MO (at pH 6.0) and PBV (at pH 3.0) respectively. It was found that the adsorption process follows a Freundlich adsorption isotherm and pseudo second order kinetics. A thermodynamic study revealed that the process of adsorption was enthalpy-driven and spontaneous in nature. Interestingly, the values of the adsorption capacity obtained in column adsorption method are in close agreement with those obtained in batch adsorption experiments, which shows the potential of the synthesized composite for uptake of dyes.

The enhancement of reactive red 24 adsorption from aqueous solution using agricultural waste-derived biochar modified with ZnO nanoparticles

In this study, two types of agricultural wastes, sugarcane bagasse (SB) and cassava root husks (CRHs), were used to fabricate biochars. The pristine biochars derived from SB and CRHs (SBB and CRHB, respectively) were modified using ZnO nanoparticles to generate modified biochars (SBB-ZnO and CRHB-ZnO, respectively) for the removal of Reactive Red 24 (RR24) from stimulated wastewater. Batch experiments were performed to evaluate the effects of ZnO nanoparticles' loading ratio, solution pH, contact time, and initial RR24 concentration on the RR24 adsorption capacity of biochars. The RR24 adsorption isotherm and kinetic data on SBB, SBB-ZnO3, CRHB, and CRHB-ZnO3 were analyzed. Results indicate that SB- and CRH-derived biochars with a ZnO nanoparticle loading ratio of 3 wt% could generate maximum adsorption capacities of RR24 thanks to the double growth on the BET surface of modified biochars. The RR24 adsorption capacities of CRHB-ZnO3 and SBB-ZnO3 reached 81.04 and 105.24 mg g-1, respectively, which were much higher than those of pristine CRHB and SBB (66.19 and 76.14, respectively) at an initial RR24 concentration of 250 mg L-1, pH 3, and contact time of 60 min. The adsorption of RR24 onto biochars agreed well with the pseudo-first-order model and the Langmuir isotherm. The RR24 adsorption capacity on modified biochars, which were reused after five adsorption-desorption cycles showed no insignificant drop. The main adsorption mechanisms of RR24 onto biochars were controlled by electrostatic interactions between biochars' surface positively charged functional groups with azo dye anions, pore filling, hydrogen bonding formation, and π-π interaction.

A comprehensive review on the integration of advanced oxidation processes with biodegradation for the treatment of textile wastewater containing azo dyes

The threat of dye contamination has achieved an unsurpassed abnormal state lately due to their massive consumption in several enterprises including textile, leather, cosmetic, plastic, and paper industries. This review focuses on the integrations of various advanced oxidation processes (AOPs), such as Fenton, photocatalysis, and ozonation, with biodegradation for the treatment of textile azo dyes. Such integrations have been explored lately by researchers to bring down the processing cost and improve the degree of mineralization of the treated dyeing wastewater. The review refers to the basic mechanisms, the influence of various process parameters, outcomes of recent works, and future research directions. All the three AOPs, independently, demonstrated substantial color reduction of 54–100%. The ozonation process, stand-alone, showed the most efficient decolorization (of 88–100%) consistently in all reviewed research works. In contrast, all three AOPs independently offered varied and inadequate COD reduction in the range of 16–80%. The AOPs, after getting integrated with biodegradation, yielded an additional reduction (of 11–70%) in the COD-levels and (of 16–80%) in the TOC-levels. Further, the integration of AOPs with biodegradation has potential to significantly reduce the treatment costs. The review suggests further research efforts in the direction of sequencing chemical and biological routes such that their synergistic utilization yield complete detoxification of the textile azo dyes economically at large-scale.

Decolorization of dyes from textile wastewater using biochar: a review

The textile industry is one of the largest in many low and middle-income countries, especially in Asia, second only to agriculture. Textile wastewater is discharged into the environment due to the lack of affordable and sustainable solutions to adsorb or remove the dye from the water. Biochar is generated by pyrolysis of organic material from plant waste in low-oxygen conditions, and is considered carbon-negative. Biochar for dye adsorption in textile wastewater effluent was proven to be highly effective. However, adsorption efficiency varies with experimental parameters, therefore there is a gap in application especially in small dye houses. Efforts should be made to find innovative and affordable solution to make the textile industry more sustainable, by developing methods for collection and reuse, recycle and upcycle of textile waste, by reducing the consumption of water, energy and chemicals and by developing methods for treatment of the textile wastewater.

An efficient strategy for the enhancement of adsorptivity of microporous carbons against gaseous formaldehyde: Surface modification with aminosilane adducts

In an effort to develop a cost-effective mitigation tool for volatile organic compounds, particularly formaldehyde (FA), microporous activated carbon (AC) was modified into three different forms of AC-1, AC-2, and AC-3 using a raw commercial AC product (AC-0). First, AC-1 and AC-2 were produced by the modification of AC-0 with N/S heteroatoms using identical mixture of dicyandiamide and thiourea precursors through either solvothermal (AC-1) or microwave-assisted calcination (AC-2) synthesis. Second, aminosilane-functionalized AC (AC-3) was prepared solvothermally using N-[3-(Trimethoxysilyl)propyl]ethylenediamine reagent. The relative adsorption performances for gaseous FA (1 ppm) in terms of 10% breakthrough volume (BTV10: L atm g^-1) at near-ambient conditions (25 °C and 1 atm) were AC-3 (132) > AC-2 (66.5) > AC-1 (14.2) > AC-0 (10.4). In a comparison based on partition coefficients (mole kg^-1 Pa^-1) at BTV10, AC-3 outperformed AC-0 by a factor of 214, while the adsorption performance of AC-2 was 36-times higher than AC-1. The enhanced performance of AC-2 over AC-1 reflected the effect of the microwave synthesis protocol on the improvement of surface chemistry (e.g., N/S doping) and texture (e.g., surface area and pore volume) of AC-based adsorbents as compared to conventional solvothermal method. Further, the prominent role of surface chemistry (e.g., relative to textural properties), as observed with the increases in the amount of doped functional elements (including N:C and silicon:C ratios), is supported by the apparent dependence of performance on the selected modification procedures. Based on kinetic and X-ray photoelectron spectroscopy analyses, the superiority of aminosilylated AC-3 can be attributed to a synergistic effect between physisorption (e.g., pore diffusion) and chemical interactions of the FA carbonyl (C=O) group with amine and silica functionalities (via Mannich coupling [Schiff base] and cycloaddition reaction mechanisms, respectively). This confirms the significance of surface chemistry, relative to pore diffusion, in achieving maximum adsorption of gaseous FA molecules.

Hydrothermal liquefaction of rice husk and cow dung in Mixed-Bed-Rotating Pyrolyzer and application of biochar for dye removal

This work studied the hydrothermal liquefaction of rice husk (RH) and cow dung (CD) for the production of biochar from RH and CD and use of that biochar for the removal of dye from textile industry effluent. These biomasses were subjected to fast pyrolysis (500 °C), which yielded biochar (22.8 and 29.8%) and bio-oil (60.4 and 57.3%) from RH and CD, respectively. Biochar was characterized based on spectroscopy Fourier Transform Infrared Spectroscopy (FTIR) and morphological studies like Scanning Electron Microscope (SEM) and SEM-EDS. Further, bio-oil samples were characterized by GC-MS into saturated and polyunsaturated fatty acids, carboxylic acids, phenolics and aromatic hydrocarbons. The removal efficiencies of the Congo red dye from prepared biochar in a batch experiment were 66.8-96.9%(RH) and 68.9-98.8%(CD). The adsorption isotherms for Langmuir (R² = 0.977 and 0.902) and Freundlich (R² 0.842 and 0.883) were calculated for RH and CD biochar, respectively.

Adsorption of Patent Blue V from Textile Industry Wastewater Using Sterculia alata Fruit Shell Biochar: Evaluation of Efficiency and Mechanisms

Biochar prepared from Sterculia alata fruit shell showed a better performance for dye removal than the biomass from Sterculia alata fruit shell. The important process parameters—namely the pH, the amount of biochar, the initial dye concentration and the contact time—were optimized in order to maximize dye removal using biochar of Sterculia alata fruit shell as the bio-sorbent. The results from this study showed that the maximum adsorption of dye on the biochar was obtained at a biochar dosage of 40 g/L, at a contact time of 5 h, and an initial dye concentration of 500 mg/L (pH 2.0; temperature 30 ± 5 °C). The increase in the rate adsorption with temperature and the scanning electron microscopic (SEM) images indicated the possibility of multilayer type adsorption which was confirmed by better fit of the Freundlich adsorption isotherm with the experimental data as compared to the Langmuir isotherm. The values n and R2 in the Freundlich isotherm were found to be 4.55 and 0.97, respectively. The maximum adsorption capacity was found to be 11.36 mg/g. The value of n > 1 indicated physical nature of the adsorption process. The first and second order kinetics were tested, and it was observed that the adsorption process followed the first-order kinetics (R2 = 0.911).

Reusability of brilliant green dye contaminated wastewater using corncob biochar and Brevibacillus parabrevis: hybrid treatment and kinetic studies

This work highlights the potential of corncob biochar (CCBC) and Brevibacillus parabrevis for the decolorization of brilliant green (BG) dye from synthetically prepared contaminated wastewater. The CCBC was characterized by proximate, Fourier-transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, and Brunauer-Emmett-Teller analysis, respectively. Different parameters affecting the adsorption process were evaluated. The experimental results were analyzed by the Langmuir and Freundlich isotherm models. Kinetic results were examined by different models; pseudo-second-order model has shown the best fit to the experimental data. Anew positive values of ΔH^o (172.58 kJ/mol) and ΔS^o (569.97 J/K/mol) in the temperature range of 303-318 K revealed that the adsorption process was spontaneous and endothermic. The present investigation showed that the bacteria immobilized with CCBC showed better BG dye degradation. The kinetic parameters, μ_max, Ks, and μ _max, were found to be 0.5 per day, 39.4 mg/day, and 0.012 L/mg/day using Monod model, respectively. The adsorbent with bacteria showed good potential for the removal of cationic BG dye and can be considered for the remediation of industrial effluent.

Application of Arjuna (Terminalia arjuna) seed biochar in hybrid treatment system for the bioremediation of Congo red dye

In the present study, a hybrid treatment system (biological and ozonation) was developed and used in the decolorization of Congo red (CR) dye. The biological treatment was performed in packed bed bioreactor (PBBR) containing Arjuna (Terminalia Arjuna) seeds biochar immobilized with Providencia stuartii, whereas ozonation was carried out in an ozone reactor. The process variables such as temperature, process time, and inoculum size were optimized and found to be 30 °C, 2 48 h, and 3 × 10⁵ CFU/mL, respectively with 92.0 ± 5.0% of dye decolorization. Furthermore, biologically treated effluent was subject to ozone treatment for the decolorization of the remaining CR dye. The hybrid approach reveals almost complete decolorization of Congo red (CR) dye. The kinetic study of microbial growth was examined by Monod model. In addition, the cost analysis estimation for the removal of CR dye was done, and removal per liter was found to be economic.

Removal of methylene blue dye using rice husk, cow dung and sludge biochar: Characterization, application, and kinetic studies

The present studies aimed for the removal of Methylene blue (MB) dye using the rice husk biochar (RHB), cow dung biochar (CDB) and domestic sludge biochar (SB) synthesized through slow pyrolysis at 500 °C. The biochar was used for the adsorption of synthetic aqueous MB dye. The removal efficiencies of MB by CDB, RHB and SB in a batch experiment were 97.0-99.0; 71.0-99.0 and 73.0-98.9% at conditions, pH (2.0-11.0); Biochar dosage (0.5-6.0 g/100 mL) for 5 days. Adsorption isotherm of Langmuir constant (K_L) were obtained 0.101, 0.583 and 0.128 for RHB, CDB and SB respectively. Further, adsorption kinetics of pseudo first order for RHB, CDB and SB were 0.068, 0.018, and 0.066 while it was 0.031, 0.023 and 0.273 for pseudo second order kinetics. Thus, CDB was more effective adsorbent for the dye removal. The pHz values were 7.8, 6.3 and 6.0 for the CDB, RHB, and SB, respectively.

Application of Zr-Cluster-Based MOFs for the Adsorptive Removal of Aliphatic Aldehydes (C1 to C5) from an Industrial Solvent

Metal-organic frameworks (MOFs) are recognized as advanced sorbents for the effective removal and recovery of various hazardous pollutants in liquid and gaseous environments. In this research, the potential applicability of two Zr-based MOFs (UiO-66 (U6) and its amine counterpart UiO-66-NH₂ (U6N)) was investigated relative to activated carbon (AC, tested as a reference adsorbent) for the purification of industrial organic solvents (e.g., methanol) from six different carbonyl impurities (CCs (C₁ to C₅): formaldehyde (FA, CH₂O), acetaldehyde (AA, CH₃CHO), propionaldehyde (PA, C₃H₆O), butyraldehyde (BA, C₄H₈O), isovaleraldehyde (IA, C₅H₁₀O), and valeraldehyde (VA, C₅H₁₀O)). In the sorptive removal of these CCs (both individually and in binary mixtures with FA), U6N showed higher efficacy in capturing all of the target CCs than U6 and AC. The adsorption selectivity of U6N toward single CC compounds was in the order of PA (165.1 mg g^-1) > BA (158.9 mg g^-1) > IA (154 mg g^-1) > AA (136 mg g^-1) > VA (131.5 mg g^-1) > FA (120 mg g^-1). In all binary mixtures, U6N selectively captured FA over the heavier CCs (C₂-C₅) by 1.5-3.3 times due to the steric hindrance of the C₂-C₅ aliphatic tails in the pore diffusion mechanism. The preferential adsorption of FA onto U6N can also be accounted for by the contribution of chemical bonding (Schiff base interaction) between the -NH₂ groups in U6N and the C═O functionalities (aldehyde molecules) and physisorption, as confirmed by density functional theory (DFT) calculations. Theoretical DFT simulations also revealed that the competition between aldehyde molecules for Brønsted acidic sites (μ₃-OH of Zr-clusters) created minor distortions in the U6/U6N frameworks.