Performance Assessment of a Laboratory Scale Prototype Biofiltration System in Tropical Region

A review of compaction effect on subsurface processes in soil: Implications on stormwater treatment in roadside compacted soil

Sustainable cities require spacious infrastructures such as roadways to serve multiple functions, including transportation and water treatment. This can be achieved by installing stormwater control measures (SCM) such as biofilters and swales on the roadside compacted soil, but compacted soil limits infiltration and other functions of SCM. Understanding the effect of compaction on subsurface processes could help design SCM that could alleviate the negative impacts of compaction. Therefore, we synthesize reported data on compaction effects on subsurface processes, including infiltration rate, plant health, root microbiome, and biochemical processes. The results show that compaction could reduce runoff infiltration rate, but adding sand to roadside soil could alleviate the negative impact of compaction. Compaction could decrease the oxygen diffusion rate in the root zone, thereby affecting plant root activities, vegetation establishment, and microbial functions in SCM. The impacts of compaction on carbon mineralization rate and root biomass vary widely based on soil type, aeration status, plant species, and inherent soil compaction level. As these processes are critical in maintaining the long-term functions of SCM, the analysis would help develop strategies to alleviate the negative impacts of compaction and turn road infrastructure into a water solution in sustainable cities.

Exploring the Potential in LID Technologies for Remediating Heavy Metals in Carwash Wastewater

Carwash wastewater (CWW) can be a significant source of environmental pollution due to the diversity and high concentrations of contaminants it contains. This toxic wastewater can contain several different heavy metals that if left untreated, can enter surface and sub-surface waters. Innovative, nature-based solutions such as low-impact development (LID) technologies may provide an eco-friendly CWW treatment process that is both effective and affordable. This research reviews the available literature to provide definitive values of flowrate and contaminant concentrations found in CWW around the globe. Dividing LID technologies into two groups, vegetated and unvegetated systems, the authors explored the literature for the general performance of these technologies to sustainably treat heavy metals in CWW. Depending on the car wash’s size and intended purpose, whether cleaning vehicles in agriculture-based rural communities, mining, or in high-density urban environments, volumetric flowrates requiring treatment found in six different countries ranged from 35–400 L/car. CWW also contains a wide range of contaminants at various levels, including COD, turbidity, TDS and TSS, surfactants, oils and greases, and heavy metals such as lead, cadmium, zinc, copper, chromium, and iron. Heavy metal removal by both vegetated and unvegetated LIDs shows mixed results in the literature, but given the different processes involved in both types, the authors propose a system that combines these types in order to provide all the necessary removal processes, including mechanical filtration, adsorption, sedimentation, chemical and biological treatment processes.

Pilot and Field Studies of Modular Bioretention Tree System with Talipariti tiliaceum and Engineered Soil Filter Media in the Tropics

Stormwater runoff management is challenging in a highly urbanised tropical environment due to the unique space constraints and tropical climate conditions. A modular bioretention tree (MBT) with a small footprint and a reduced on-site installation time was explored for application in a tropical environment. Tree species used in the pilot studies were Talipariti tiliaceum (TT1) and Sterculia macrophylla (TT2). Both of the MBTs could effectively remove total suspended solids (TSS), total phosphorus (TP), zinc, copper, cadmium, and lead with removal efficiencies of greater than 90%. Total nitrogen (TN) removal was noted to be significantly higher in the wet period compared to the dry period (p < 0.05). Variation in TN removal between TT1 and TT2 were attributed to the nitrogen uptake and the root formation of the trees species. A field study MBT using Talipariti tiliaceum had a very clean effluent quality, with average TSS, TP, and TN effluent EMC of 4.8 mg/L, 0.04 mg/L, and 0.27 mg/L, respectively. Key environmental factors were also investigated to study their impact on the performance of BMT. It was found that the initial pollutant concentration, the dissolved fraction of influent pollutants, and soil moisture affect the performance of the MBT. Based on the results from this study, the MBT demonstrates good capability in the improvement of stormwater runoff quality.

Urban stormwater characterization, control, and treatment

This review summarizes over 280 studies published in 2019 related to the characterization, control, and management of urban stormwater runoff. A summary of quantity and quality concerns is provided in the first section of the review, serving as the foundation for the following sections which focus on the control and treatment of stormwater runoff. Finally, the impact of stormwater control devices at the watershed scale is discussed. Each section provides a self-contained overview of the 2019 literature, common themes, and future work. Several themes emerged from the 2019 literature including exploration of substrate amendments for improved water quality effluent from stormwater controls, the continued study of the role of vegetation in green infrastructure practices, and a call to action for the development of new models which generate reliable, computationally efficient results under the physical, chemical, biological, and social complexity of stormwater management. PRACTITIONER POINTS: Over 280 studies were published in 2019 related to the characterization, control, and treatment of urban stormwater. Studies on bioretention and general stormwater characteristics represented the two most common subtopics in 2019. Trends in 2019 included novel substrate amendments, studies on the role of vegetation, and advancements in computational models.