Assessment of the Possible Reuse of Extractive Waste Coming from Abandoned Mine Sites: Case Study in Gorno, Italy

Health and environmental impact assessment of landfill mining activities: A case study in Norfolk, UK

The release of fine particles during mechanical landfill mining (LFM) operations is a potential environmental pollution and human health risk. Previous studies demonstrate that a significant proportion (40–80% wt) of the content of fine soil-like materials within the size range <10 mm to <4 mm recovered from such operations originate from municipal solid waste (MSW) landfills. This study evaluates the potential health risks caused by emissions from LFM activities. MSW samples recovered from the drilling of four different wells of a closed UK landfill were analysed for physical, chemical, and biological properties to determine the extent of potential contaminant emissions during LFM activities. The results show that fine particles (approximately ≤1.5 mm) accounted for more than 50% of the total mass of excavated waste and contained predominantly soil-like materials. The concentrations of Zn, Cu, Pb, Cd, As, and Cr exceed the permissible limits set by the current UK Soil Guideline Values. The highest geoaccumulation index and contamination factor values for Cu were 2.51 and 12.51, respectively, indicating a moderate to very high degree of contamination. Unsurprisingly, the pollution load index was >1, indicating the extent of pollution within the study area. The hazard quotient values indicated high exposure-related risks for Pb (16.95), Zn (3.56), Cd (1.47), and As (1.46) for allotment land use and As (1.96) for residential land use. The cancer-related risk values were higher than the acceptable range of 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴. The cancer risk factor indicated that Cr and As were the major human health risk hazards.

•

Potentially toxic elements and organics associated with waste fine fractions.

•

Novel method for assessing potential human health risk of heavy metals achieved.

•

Landfill poses major risk to human health and environment if LFM occurs.

•

Pb highest contributor to the non-carcinogenic risk.

•

Cr most prominent metal with respect to carcinogenic effect.

Manufacture and Characterization of Fired Bricks from Gold Mine Waste Rocks

The purpose of this research was to evaluate the possibility of using gold mine waste rocks (GMWRs) as alternative raw material for the manufacturing of fired bricks. The feasibility study was assessed through (i) physical, chemical, mineralogical and environmental characteristics of GMWRs; (ii) determination of the natural clay (NC) substitution effect when using GMWRs; (iii) the effect of the firing temperature on the mechanical and physical properties of the fired bricks. Five mixtures of NC and GMWRs were studied. The percentages of substitution of NC with GMWRs varied from 0 to 100%. The brick specimens were fired at 900 °C, 1000 °C and 1050 °C. The results show that increasing the firing temperature improved the flexural strength and density of the bricks, while the substitution of NC with GMWRs caused a reduction in the mechanical resistance of the bricks and an increase in their porosity and, consequently, their water absorption rate. However, the properties of bricks that contained up to 80 wt% of GMWRs and fired at 1000 °C and 1050 °C satisfied the requirements set by the applicable civil engineering and environmental standards. This was found to be an efficient and sustainable solution to mitigate environmental hazards and better manage mining wastes, concurrently producing marketable products from them, which is in accordance with the circular economy concept.

Critical Minerals from Post-Processing Tailing. A Case Study from Bangka Island, Indonesia

The growing demand for critical raw materials (rare earth elements—REE, Nb, Ta, and others) enforces a need to look for their alternative sources. Distortions of the mineral supply chain caused by COVID-19 have necessitated a re-evaluation of what exists as mining waste from previous exploitation. Consequently, this study aims to provide an inventory of raw materials on the Indonesian Tin Islands (Bangka and Belitung). Geological and mineralogical examinations on Bangka have permitted an economic appraisal of tailings from the processing of cassiterite-bearing sands and confirmed the presence of REE-bearing minerals, chiefly monazite and xenotime, zircon, ilmenite, rutile, niobium-tantalum phases. In general, the mineral content of the tailings varies depending on the sampling site and the type of processing used during ore-production. ICP-MS (inductively coupled plasma–mass spectrometers) analyses revealed anomalous concentrations of LREE (light rare earth elements): La > 5%, Ce > 5%, Pr > 1%, Nd > 1%, Sm > 1% and HREE+Y (heavy rare earth elements and yttrium) up to 2.51 wt%. High values have been found for the “most critical” metals of the HREE group: Dy (up to 0.34 wt%), Tb (up to 0.08 wt%), Eu (up to 61.8 ppm), Nd (>1.0 wt%), and Y (up to 1.20 wt%). In addition, the following contents have been defined: Ga (to 0.03 wt%); Hf (to 0.64 wt%); Ta (to 0.08 wt%); Nb (to 0.23 wt%); W (to 0.14 wt%); Zr (>5.0 wt%); and Sc (to 0.01 wt%). Such high concentrations suggest the tailing dumps to be a potential new source of “critical raw materials”.

Geochemical and Mineralogical Characterisation of Historic Zn–Pb Mine Waste, Plombières, East Belgium

Mine wastes and tailings derived from historical processing may contain significant contents of valuable metals due to processing being less efficient in the past. The Plombières tailings pond in eastern Belgium was selected as a case study to determine mineralogical and geochemical characteristics of the different mine waste materials found at the site. Four types of material were classified: soil, metallurgical waste, brown tailings and yellow tailings. The distribution of the mine wastes was investigated with drill holes, pit-holes and geophysical methods. Samples of the materials were assessed with grain size analysis, and mineralogical and geochemical techniques. The mine wastes dominantly consist of SiO2, Al2O3 and Fe2O3. The cover material, comprising soil and metallurgical waste is highly heterogeneous in terms of mineralogy, geochemistry and grain size. The metallurgical waste has a high concentration of metals (Zn: 0.1 to 24 wt.% and Pb: 0.1 to 10.1 wt.%). In the tailings materials, Pb and Zn vary from 10 ppm to 8.5 wt.% and from 51 ppm to 4 wt.%, respectively. The mining wastes comprises mainly quartz, amorphous phases and phyllosilicates, with minor contents of Fe-oxide and Pb- and Zn-bearing minerals. Based on the mineralogical and geochemical properties, the different potential applications of the four waste material types were determined. Additionally, the theoretical economic potential of Pb and Zn in the mine wastes was estimated.

The re-direction of small deposit mining: Technological solutions for raw materials supply security in a whole systems context

Large-scale mining of low-grade ores is energy-intensive and generates vast wastes. It has limited suitability for production of specialist metals that are required in relatively small quantities. An approach that limits environmental impact by restricting mining to high-grade deposits requires the investigation of small ore deposits as alternative sources of metals. The return on investment from small deposits is incompatible with the expensive surveys needed to secure investment and the high costs of managing risk. But increasing energy and transport costs may create space in the market for small-deposit mining with highly-competitive technological solutions. It can be argued that small-deposit mining is ethical because it must involve cooperation between mining companies and local residents who share a collective expectation and responsibility for their quality of life. However, small-deposit mining tends to be a limited, short-term initiative, which requires consideration of the extended ‘afterlife’ of mines. This manuscript is the culmination of five years of cross-sector dialogue and stakeholder engagement activities. It debates what constitutes a small deposit and describes the interactions between mining and manufacturing, investment, environment and society. It reaches the conclusion that technological innovations will support the re-emergence of small deposit mining as an important part of a diverse raw materials production sector. We do not suggest a return to past approaches, to mining of small, high-grade deposits, but a consideration of alternative narratives of localised, community-orientated mining processes, thus giving social, economic and environmental context to the needs of the present day.