Adsorption of Fluorides in Drinking Water by Palm Residues

Applications of biomass-based materials to remove fluoride from wastewater: A review

Fluoride is one of the essential trace elements for the human body, but excessive fluoride will cause serious environmental and health problems. This paper summarizes researches on the removal of fluoride from aqueous solutions using newly developed or improved biomass materials and biomass-like organic materials in recent years. These biomass materials are classified into chitosan, microorganisms, lignocellulose plant materials, animal attribute materials, biological carbonized materials and biomass-like organic materials, which are explained and analyzed. By comparing adsorption performance and mechanism of adsorbents for removing fluoride, it is found that carbonizing materials and modifying adsorbents with metal ions are more beneficial to improving adsorption efficiency and the adsorption mechanisms are various. The adsorption capacities are still considerable after regeneration. This paper not only reviews the properties of these materials for fluoride removal, but also focuses on the comparison of materials performance and fluoride removal mechanism. Herein, by discussing the improved adsorption performance and research technology development of biomass materials and biomass-like organic materials, various innovative ideas are provided for adsorbing and removing contaminants.

Synergistic Fluoride Adsorption by Composite Adsorbents Synthesized From Different Types of Materials—A Review

The reduction of fluoride concentrations in water is one of many concerns. Adsorption is the most widely used technology for fluoride removal and the center to development of adsorption technology is the improvement of adsorbents. This review classifies the typical fluoride removal adsorbents into four types: metal oxides/hydroxides, biopolymers, carbon-based, and other adsorbents. The exploitation of new materials and the synthesis of composite materials are two ways of developing new adsorbents. In comparison to the discovery of novel adsorbents for fluoride adsorption, research into the composite synthesis of different types of conventional adsorbents has proliferated in recent years. The traditional adsorbents used the earliest, metal oxides, can act as active centers in a wide range of applications for modifying and compounding with other types of adsorbents. This study emphasizes reviewing the research on fluoride removal by composite adsorbents synthesized from different types of metal-modified materials. Seven factors were compared in terms of material characterization, initial fluoride concentration, adsorbent dose, pH, temperature, reaction time, and maximum adsorption capacity. The modification of composite adsorbents is facile and the synergistic effect of the different types of adsorbents significantly improves fluoride adsorption capacity. Metal composite adsorbents are synthesized by facile coprecipitation, hydrothermal, or impregnation modification methods. The adsorption mechanisms involve electrostatic attraction, ion exchange, complexation, and hydrogen bonding. The fluoride adsorption capacity of composite adsorbents has generally improved, indicating that most modifications are successful and have application prospects. However, to achieve significant breakthroughs in practical applications, numerous issues such as cost, separation/regeneration performance, and safety still need to be considered.

Graphene Oxide Nanoadsorbent for the Removal of Fluoride Ion from Groundwater: Adsorbent Performance and Adsorption Mechanism

The deterioration of the quality of groundwater by fluoride is the cause of shortage of drinking water supply in the rift valley region. Most people living in the rural areas are using groundwater as the source of their potable water; however, it is contaminated with high concentrations of fluoride ion above the permissible level. Hence, this study was designed to investigate the adsorption of fluoride from groundwater by graphene oxide (GO) under specific conditions, such as: agitation rate of 120 rpm, contact time of 90 minutes, adsorbent dosage of 0.42 mg/L, initial fluoride concentration of 10 mg/L, and pH of 6.8. The result obtained showed 99.3% fluoride removal from the NaF prepared solution and 91.6% fluoride removal from the real sample. The retained properties of GO after adsorption observed on UV–Vis analysis confirmed that the adsorbent can be recyclable. The result obtained also showed that the adsorption kinetics with the coefficient of determination (R2) for pseudo-second order (SSO) and pseudo-first order (SFO) were 0.99 and 0.96, respectively. Based on these results, the adsorption of fluoride onto GO is a pseudo-second-order kinetics type. According to the result, the Freundlich isotherm model showed a good fit to the experiment with R2 (0.99). The adsorption capacity of the adsorbent was found to be 301.43 mg/g. Hence, this study showed that GO is the preferred adsorbent for the removal of fluoride from groundwater.

Rice Industry By-Products as Adsorbent Materials for Removing Fluoride and Arsenic from Drinking Water—A Review

In drinking water, high concentrations of fluoride and arsenic can have adverse effects on human health. Waste deriving from the rice industry (rice husk, rice straw, rice bran) can be promising adsorbent materials, because they are (i) produced in large quantities in many parts of the world, (ii) recoverable in a circular economy perspective, (iii) at low cost if compared to expensive conventional activated carbon, and (iv) easily manageable even in developing countries. For the removal of fluoride, rice husk and rice straw allowed to obtain adsorption capacities in the range of 7.9–15.2 mg/g. Using rice husk for arsenic adsorption, excellent results were achieved with adsorption capacities above 19 mg/g. The best results both for fluorides and arsenic (>50 mg/g) were found with metal- or chemical-modified rice straw and rice husk. Identifying the next steps of future research to ensure the upscaling of biochar from recovered by-products, it is fundamental to perform: (i) tests on real waters for multicomponent adsorption; (ii) experiments with pilot plants in continuous operation; (iii) cost analysis/real applicability of modification treatments such as metal coupling or chemical synthesis; (iv) more studies on the biochar stability and on its regeneration or recovery after use.

Comprehensive and critical appraisal of plant-based defluoridation from environmental matrices

Fluoride is recognized as one of the global environmental threats because of its non-biodegradable nature and long-term persistence in the environment. This has created the dire need to explore various defluoridation techniques (membrane process, adsorption, precipitation, reverse osmosis, ion exchange, and electrocoagulation). Owing to their cost ineffectiveness and high operational costs, these technologies failed to find any practical utility in fluoride remediation. Comparatively, defluoridation techniques involving the use of low-cost plant-derived adsorbents and fluoride phytoremediators are considered better alternatives. Through this review, an attempt has been made to critically synthesize information about various plant-based bioadsorbents and hyperaccumulators from existing literature. Moreover, mechanisms underlying the fluoride adsorption and accumulation by plants have been thoroughly discussed that will invigorate the researchers to develop novel ideas about process/product modifications to further enhance the removal potential of the adsorbents and plants. Literature survey unravels that various low-cost plant-derived adsorbents have shown their efficacy in defluoridation, yet there is an urgent need to explore their pragmatic application on a commercial scale.

Recently Developed Adsorbing Materials for Fluoride Removal from Water and Fluoride Analytical Determination Techniques: A Review

In recent years, there has been an increase in public perception of the detrimental side-effects of fluoride to human health due to its effects on teeth and bones. Today, there is a plethora of techniques available for the removal of fluoride from drinking water. Among them, adsorption is a very prospective method because of its handy operation, cost efficiency, and high selectivity. Along with efforts to assist fluoride removal from drinking waters, extensive attention has been also paid to the accurate measurement of fluoride in water. Currently, the analytical methods that are used for fluoride determination can be classified into chromatographic methods (e.g., ionic chromatography), electrochemical methods (e.g., voltammetry, potentiometry, and polarography), spectroscopic methods (e.g., molecular absorption spectrometry), microfluidic analysis (e.g., flow injection analysis and sequential injection analysis), titration, and sensors. In this review article, we discuss the available techniques and the ongoing effort for achieving enhanced fluoride removal by applying novel adsorbents such as carbon-based materials (i.e., activated carbon, graphene oxide, and carbon nanotubes) and nanostructured materials, combining metals and their oxides or hydroxides as well as natural materials. Emphasis has been given to the use of lanthanum (La) in the modification of materials, both activated carbon and hybrid materials (i.e., La/Mg/Si-AC, La/MA, LaFeO3 NPs), and in the use of MgO nanostructures, which are found to exhibit an adsorption capacity of up to 29,131 mg g−1. The existing analytical methodologies and the current trends in analytical chemistry for fluoride determination in drinking water are also discussed.

Iron Oxide (Fe3O4)-Supported SiO2 Magnetic Nanocomposites for Efficient Adsorption of Fluoride from Drinking Water: Synthesis, Characterization, and Adsorption Isotherm Analysis

This research work reports the magnetic adsorption of fluoride from drinking water through silica-coated Fe3O4 nanoparticles. Chemical precipitation and wet impregnation methods were employed to synthesize the magnetic nanomaterials. Moreover, the synthesized nanomaterials were characterized for physicochemical properties through scanning electron microscopy, Fourier-transform infrared spectroscopy, and X-ray powder diffraction. Screening studies were conducted to select the best iron oxide loading (0.0–1.5 wt%) and calcination temperature (300–500 °C). The best selected nanomaterial (0.5Fe-Si-500) showed a homogenous FeO distribution with a 23.79 nm crystallite size. Moreover, the optimized reaction parameters were: 10 min of contact time, 0.03 g L−1 adsorbent dose, and 10 mg L−1 fluoride (F−) concentration. Adsorption data were fitted to the Langmuir and Freundlich isotherm models. The Qm and KF (the maximum adsorption capacities) values were 5.5991 mg g−1 and 1.869 L g−1 respectively. Furthermore, accelerated adsorption with shorter contact times and high adsorption capacity at working pH was among the outcomes of this research work.

Formation and In Situ Treatment of High Fluoride Concentrations in Shallow Groundwater of a Semi-Arid Region: Jiaolai Basin, China

Fluorine is an essential nutrient, and excessive or deficient fluoride contents in water can be harmful to human health. The shallow groundwater of the Jiaolai Basin, China has a high fluoride content. This study aimed to (1) investigate the processes responsible for the formation of shallow high-fluoride groundwater (SHFGW); (2) identify appropriate methods for in situ treatment of SHFGW. A field investigation into the formation of SHFGW was conducted, and the results of experiments using soils from high-fluoride areas were examined to investigate the leaching and migration of fluoride. The results showed that the formation of SHFGW in the Jiaolai Basin is due to long-term geological and evaporation processes in the region. Stratums around and inside the basin act as the source of fluoride whereas the terrain promotes groundwater convergence. The hydrodynamic and hydrochemical conditions resulting from slow groundwater flow along with high evaporation and low rainfall all contribute to the enrichment of fluoride in groundwater. In situ treatment of SHFGW may be an effective approach to manage high SHFGW in the Jiaolai Basin. Since soil fluoride in high-fluoride areas can leach into groundwater and migrate with runoff, the construction of ditches can shorten the runoff of shallow groundwater and accelerate groundwater loss, resulting in the loss of SHFGW from high-fluoride areas through river outflow. The groundwater level will be reduced, thereby lowering the influence of evaporation on fluoride enrichment in shallow groundwater. The results of this study can act a reference for further research on in situ treatment for high-fluoride groundwater.