Evolution of Waste Cooking Oil Collection in an Area with Long-Standing Waste Management Problems

Sustainable Biocatalytic System for the Enzymatic Epoxidation of Waste Cooking Oil

The present study is integrated in a global effort to capitalize waste cooking oil (WCO) into versatile compounds by introducing an oxirane ring into the unsaturated carbon chain of fatty acid residues (the epoxidation of double bound). Therefore, an enzymatic method was set up for the epoxidation of artificially adulterated WCO (SFw) and WCO under real conditions (SFr) derived from sunflower biomass. Commercial lipase (Novozyme, NZ) was used as a biocatalyst for generating the peracid requested by the epoxidation pathway. Optimum experimental conditions (e.g., 1.5 wt% NZ, 1:1:0.5 = H2O2/double bonds/peracid precursor (molar ratio) and 12 h reaction time) allowed for the conversion of 90% of the SFw substrate into products with an oxirane ring. Octanoic acid was selected as the best peracid precursor. The versatility of the developed system was tested for olive, milk thistle, hemp and linseed oils as both fresh and WCO samples. The characterization of the oil samples before and after the enzymatic epoxidation allowed for the evaluation of the system performance. SFw/SFr exhibited a better susceptibility to enzymatic epoxidation. In addition, the reusability of the biocatalytic system was investigated. Furthermore, different strategies, such as biocatalyst coating and the addition of organic solvents/buffers were applied, limiting enzyme leaching, for the better recovery of the biocatalyst activity.

Exploiting Waste towards More Sustainable Flame-Retardant Solutions for Polymers: A Review

The development of sustainable flame retardants is gaining momentum due to their enhanced safety attributes and environmental compatibility. One effective strategy is to use waste materials as a primary source of chemical components, which can help mitigate environmental issues associated with traditional flame retardants. This paper reviews recent research in flame retardancy for waste flame retardants, categorizing them based on waste types like industrial, food, and plant waste. The paper focuses on recent advancements in this area, focusing on their impact on the thermal stability, flame retardancy, smoke suppression, and mechanical properties of polymeric materials. The study also provides a summary of functionalization methodologies used and key factors involved in modifying polymer systems. Finally, their major challenges and prospects for the future are identified.

Molecular identification and lipolytic potential of filamentous fungi isolated from residual cooking oil

Filamentous fungi, microorganisms that develop and are located in different habitats, are considered important producers of enzymes and metabolites with potential for the biotechnology industry. The objective of this work was to isolate and identify filamentous fungi that grow in used oil. Two fungal species were characterised through their morphology and molecular identification. The DNA of each extracted strain was amplified by PCR using primers ITS1 and ITS4, obtaining sequences that were later in GenBank (NCBI). A white coloured strain (HB) with a cottony, white, hyaline morphology and irregular borders was observed; so too, a brown colony (HC) with a sandy surface, a well-defined border of beige colour in early growth until it became a dark brown colour. The identity result by homology of the sequences in the BLASTn database was 100% and 99.55%, indicating that they correspond to Cladosporiumtenuissimum and Fomitopsismeliae, respectively. Finally, the results in lipolytic activity show greater potential for Fomitopsismeliae with 0.61 U/l in residual oil. Thus, it is important to highlight the potential of this type of waste to favour the prospection of microorganisms for a sustainable alternative for future studies of biological conversion.

Water-Based Route for Dopamine and Reduced Graphene Oxide Aerogel Production

Water pollution caused by domestic waste oil and accidents with oil/organic spill needs immediate remediation, as such a pollution causes serious threats to health and the environment. Development of absorbent materials for the treatment of oil-polluted waters in a green and energy-efficient manner is highly desired. In this study, a green and simple strategy is proposed to prepare aerogels by hydrothermal reaction of graphene oxide (GO) dispersions using dopamine (DOPA) as the cross-linker. Concentrations of GO and DOPA were changed to determine their effects on absorption capacities. Aerogels produced had low densities ranging from 2.90 to 4.34 mg/cm3. Various organics, diesel oil, and sunflower oil were used to evaluate the absorption capacity of aerogels. It was observed that even with a mild thermal reduction at 150 °C, aerogels exhibited very high absorption capacities of up to 445 mg/mg. The produced aerogels showed high reusability (80%) and structural stability even after 10 absorption/desorption cycles. They possess great potential in oil/organic removal and water treatment based on their high absorption capacities and performances in separating organics/liquids from water.

A novel pressed coal from citrus and cooking oil wastes using fungi

Nowadays renewable energy with low prices is a global target that has taken the attention to compare alternatives energy sources with fossil fuels. Therefore, this study was established to find suitable and sustainable alternative low-cost fuels source. Cooking oil waste (COW) was mixed with non-pretreated citrus tree fibers (CTF) (0.5 mL to 1 g ratio) and pressed to formulate coal (CTF/COW). Otherwise, this mixture was subjected to in situ fungal pretreated using Aspergillus flavus isolate to simplify the mixture composition and pressed to offer in a usable form with enhancing their heating value for the first time. CTF/COW was characterized using attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR), scanning electron microscope (SEM) and thermal analysis (TGA) before and after treatment. The fungal isolate was observed with enzyme productivity and activity of CMCase, avicelase, xylanase, mannanase, α-glucosidase, β-glucosidase, lignin peroxidase and lipase according to enzyme assays and the chemical compositions of CTF before and after fungal treatment, where the best PH for enzymes extraction was between 5 and 7. The fungal enzymes increased the heating value by about two and half folds in comparison with non-pretreated coal. Moreover, the calorific value of tCTF/COW was 43,422 kJ/kg, which was higher than CTF recorded 18,214 kJ/kg and COW recorded 39,823 kJ/kg. Our result suggests that fungal treatment of the mixture of citrus trees and cooking oil waste presents as a promising low-cost and eco-friendly coal.

Valorization of frying oil waste for biodetergent production using Serratia marcescens N2 and gamma irradiation assisted biorecovery

BACKGROUND

The complexity, toxicity and abundance of frying oil waste (FOW) render it difficult to be degraded biologically. The aim of the present work was to valorize FOW and investigate the potential use of the produced biosurfactant by Serratia marcescens N2 (Whole Genome sequencing accession ID SPSG00000000) as a biodetergent.

RESULTS

Serratia marcescens N2 demonstrated efficient valorization of FOW, using 1% peptone, 20% FOW and 8% inoculum size. Gene annotation showed the presence of serrawettin synthetase indicating that the produced biosurfactant was serrawettin. Zeta potential and Fourier Transform Infrared (FTIR) spectroscopy indicate that the biosurfactant produced was a negatively charged lipopeptide. The biosurfactant reduced the surface tension of water from 72 to 25.7 mN/m; its emulsification index was 90%. The valorization started after 1 h of incubation and reached a maximum of 83.3%. Gamma radiation was used to increase the biosurfactant yield from 9.4 to 19.2 g/L for non-irradiated and 1000 Gy irradiated cultures, respectively. It was noted that the biorecovery took place immediately as opposed to overnight storage required in conventional biosurfactant recovery. Both chemical and functional characteristics of the radiation induced biosurfactant did not change at low doses. The produced biosurfactant was used to wash oil stain; the highest detergency reached was 87% at 60 °C under stirring conditions for 500 Gy gamma assisted biorecovery. Skin irritation tests performed on experimental mice showed no inflammation.

CONCLUSION

This study was able to obtain a skin friendly effective biodetergent from low worth FOW using Serratia marcescens N2 with 83% efficient valorization using only peptone in the growth media unlike previous studies using complex media. Gamma radiation was for the first time experimented to assist biosurfactant recovery and doubling the yield without affecting the efficiency.

Sustainable Asphalt Rejuvenation by Using Waste Tire Rubber Mixed with Waste Oils

Waste materials such as waste tire rubber (WTR), waste cooking oil (WCO), bio-oils, waste engine oil (WEO), and other waste oils have been the subject of various scientific studies in the sustainable and waste research field. The current environmental concerns have been identified to protect natural resources and reuse waste materials. Accordingly, this work reviews the use of recycled waste tire rubber mixed with waste oils (waste cooking oil, waste engine oil) and bio-oils that can be extracted from waste oils to rejuvenate asphalt in reclaimed pavements. This new solution may reduce the massive amounts of WTR and waste oils and produce a more environmentally sustainable material. Reclaimed, aged asphalt has been rejuvenated to achieve various penetration capabilities and properties by blending asphalt with one or more waste materials to evaluate the binder using standard tests. Many solutions with promising results in improving the properties of asphalt mixtures have been selected for further characterization. This review highlights that the addition of WTR and waste materials to rejuvenated asphalt binders improves stability, enhances the viscoelastic properties, provides better fatigue and crack resistance performance, and enhances the compatibility of the rejuvenated rubber oil asphalt. Moreover, the flashing point, softening point, ductility, and penetration of aged asphalt and Poly(styrene-butadiene-styrene)-rubber-rejuvenated and waste-rubber-oil-rejuvenated asphalt were enhanced after applying the rejuvenator compound. On the other hand, adding waste oil to WTR and asphalt reduces the viscosity and enhances the storage stability compared to the asphalt rubber binder.

Waste Cooking Oil as a Sustainable Bio Modifier for Asphalt Modification: A Review

The rising demand for non-renewable resources such as asphalt binder is a significant issue in the pavement industry. Flexible pavement consumes a significant amount of asphalt binder, which has become a major issue in terms of environmental sustainability and from an economics viewpoint. Hence, researchers strive to find other alternatives to solve these problems, to enhance the performance and lifespan of flexible pavement. Biomass-based bio-oil, such as waste cooking oil (WCO), as a modifier has illustrated favorable effects for asphalt binder and mixture. However, in the pavement industry, its adoption as a modifier is still in an empirical stage. Hence, this paper aimed to give an overview by analyzing literature in-depth to reveal the potential of WCO as a modifier in the pavement industry. The low- and intermediate-temperature performance of the WCO-modified asphalt binder are superior. However, it compromises physical properties and high-temperature performance. Hence, it can be improved by controlling the quality of WCO or by further modification by additives such as ground tire rubber (GTR) and waste plastic. This paper also attempts to review available and potential physical and chemical technologies to minimize the negative effects of free fatty acid (FFA) and water content of WCO on modified asphalt binder properties. For WCO-modified asphalt mixture, the overall performance depends on the dose, quality of WCO, and type of additive added in the WCO-modified binder. Finally, future recommendations are provided to broaden the scope of WCO as a modifier in the forthcoming sustainable pavement industry.

A mixed-method study of edible oil waste from farm to table in Iran: SWOT analysis

The increasing trend of food waste is one of the serious challenges throughout the world. The purpose of this study is to investigate the status of edible oil waste (EOW) from farm to table using the SWOT (strengths, weaknesses, opportunities, and threats) analysis in Iran (2021). First, semi-structured, interviews were conducted with 11 experts in the edible oil industry. Then a cross-sectional study was done on 40 restaurant managers through telephone interviews about the restaurant's discarded edible oils. Finally, an online study was undertaken among 121 households regarding their waste cooking oil at home. Two categories in five themes with 20 subthemes were explored based on the participant's perspectives. Lack of up-to-date knowledge and appropriate technology were the main reasons for making waste from farm to factory. EOW is used optimally in other industries. The results showed that 92% of the restaurants sell the EOW for poultry feeds without refinement. The majority of the households [52%] throw EOW in the garbage and 21% dump their discarded oils in the sewage. By SWOT analysis, the challenges of EOW from farm to table were identified. There is no specific policy plan for collecting and recycling EOW. The waste oil used in poultry feed without refinement can enter the human body and the possible oxidation toxicity of this waste can pose public health risks. Policymakers can use the SWOT analysis for setting laws and regulations for EOW to ensure its safe disposal and promote its use for biodiesel to provide a healthy community.