Interaction between Biofilm Formation, Surface Material and Cleanability Considering Different Materials Used in Pig Facilities—An Overview

SARS-CoV-2 Delta variant remains viable in environmental biofilms found in meat packaging plants

To determine why SARS-CoV-2 appears to thrive specifically well in meat packaging plants, we used SARS-CoV-2 Delta variant and meat packaging plant drain samples to develop mixed-species biofilms on materials commonly found within meat packaging plants (stainless steel (SS), PVC, and ceramic tile). Our data provides evidence that SARS-CoV-2 Delta variant remained viable on all the surfaces tested with and without an environmental biofilm after the virus was inoculated with the biofilm for 5 days at 7°C. We observed that SARS-CoV-2 Delta variant was able to remain infectious with each of the environmental biofilms by conducting plaque assay and qPCR experiments, however, we detected a significant reduction in viability post-exposure to Plant B biofilm on SS, PVC, and on ceramic tile chips, and to Plant C biofilm on SS and PVC chips. The numbers of viable SARS-CoV-2 Delta viral particles was 1.81-4.57-fold high than the viral inoculum incubated with the Plant B and Plant C environmental biofilm on SS, and PVC chips. We did not detect a significant difference in viability when SARS-CoV-2 Delta variant was incubated with the biofilm obtained from Plant A on any of the materials tested and SARS-CoV-2 Delta variant had higher plaque numbers when inoculated with Plant C biofilm on tile chips, with a 2.75-fold difference compared to SARS-CoV-2 Delta variant on tile chips by itself. In addition, we detected an increase in the biofilm biovolume in response to SARS-CoV-2 Delta variant which is also a concern for food safety due to the potential for foodborne pathogens to respond likewise when they come into contact with the virus. These results indicate a complex virus-environmental biofilm interaction which correlates to the different bacteria found in each biofilm. Our results also indicate that there is the potential for biofilms to protect SARS-CoV-2 from disinfecting agents and remaining prevalent in meat packaging plants.

Medical Device-Associated Biofilm Infections and Multidrug-Resistant Pathogens

Medical devices such as venous catheters (VCs) and urinary catheters (UCs) are widely used in the hospital setting. However, the implantation of these devices is often accompanied by complications. About 60 to 70% of nosocomial infections (NIs) are linked to biofilms. The main complication is the ability of microorganisms to adhere to surfaces and form biofilms which protect them and help them to persist in the host. Indeed, by crossing the skin barrier, the insertion of VC inevitably allows skin flora or accidental environmental contaminants to access the underlying tissues and cause fatal complications like bloodstream infections (BSIs). In fact, 80,000 central venous catheters-BSIs (CVC-BSIs)-mainly occur in intensive care units (ICUs) with a death rate of 12 to 25%. Similarly, catheter-associated urinary tract infections (CA-UTIs) are the most commonlyhospital-acquired infections (HAIs) worldwide.These infections represent up to 40% of NIs.In this review, we present a summary of biofilm formation steps. We provide an overview of two main and important infections in clinical settings linked to medical devices, namely the catheter-asociated bloodstream infections (CA-BSIs) and catheter-associated urinary tract infections (CA-UTIs), and highlight also the most multidrug resistant bacteria implicated in these infections. Furthermore, we draw attention toseveral useful prevention strategies, and advanced antimicrobial and antifouling approaches developed to reduce bacterial colonization on catheter surfaces and the incidence of the catheter-related infections.

Substrate Specificity of Biofilms Proximate to Historic Shipwrecks

The number of built structures on the seabed, such as shipwrecks, energy platforms, and pipelines, is increasing in coastal and offshore regions. These structures, typically composed of steel or wood, are substrates for microbial attachment and biofilm formation. The success of biofilm growth depends on substrate characteristics and local environmental conditions, though it is unclear which feature is dominant in shaping biofilm microbiomes. The goal of this study was to understand the substrate- and site-specific impacts of built structures on short-term biofilm composition and functional potential. Seafloor experiments were conducted wherein steel and wood surfaces were deployed for four months at distances extending up to 115 m away from three historic (>50 years old) shipwrecks in the Gulf of Mexico. DNA from biofilms on the steel and wood was extracted, and metagenomes were sequenced on an Illumina NextSeq. A bioinformatics analysis revealed that the taxonomic composition was significantly different between substrates and sites, with substrate being the primary determining factor. Regardless of site, the steel biofilms had a higher abundance of genes related to biofilm formation, and sulfur, iron, and nitrogen cycling, while the wood biofilms showed a higher abundance of manganese cycling and methanol oxidation genes. This study demonstrates how substrate composition shapes biofilm microbiomes and suggests that marine biofilms may contribute to nutrient cycling at depth. Analyzing the marine biofilm microbiome provides insight into the ecological impact of anthropogenic structures on the seabed.

Antimicrobial Resistance and Biofilm Formation of Escherichia coli Isolated from Pig Farms and Surroundings in Bulgaria

Escherichia coli (E. coli) is a ubiquitous microorganism with pathogenic and saprophytic clones. The objective of this study was to evaluate the presence, virulence, antibiotic resistance and biofilm formation of E. coli in three industrial farms in Bulgaria, as well as their adjacent sites related to the utilization of manure (feces, wastewater in a separator, lagoons, means of transport, and soils). The isolation of single bacterial cultures was performed via standard procedures with modifications, and E. coli isolates were identified via matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and polymerase chain reaction (PCR). The disk diffusion method was used to assess antimicrobial resistance, and PCR was used to detect genes for antibiotic resistance (GAR) (qnr, aac(3), ampC, blaSHV/blaTEM and erm) and virulence genes (stx, stx2all, LT, STa, F4 and eae). The protocol of Stepanović was utilized to measure the biofilm formation of the isolates. A total of 84 isolates from different samples (n = 53) were identified as E. coli. Almost all demonstrated antimicrobial resistance, and most of them demonstrated resistance to multiple antibiotics from different classes. No virulence genes coding the Shiga toxin or enterotoxins or those associated with enteropathogenicity were detected. No GAR from those tested for quinolones, aminoglycosides and macrolides were found. However, all isolates that were resistant to a penicillin-class antibiotic (56) had β-lactamase-producing plasmid genes. All of them had ampC, and 34 of them had blaTEM. A total of 14 isolates formed strongly adherent biofilms. These results in a country where the use of antibiotics for growth promotion and prophylaxis in farms is highly restricted corroborate that the global implemented policy on antibiotics in human medicine and in animal husbandry needs revision.

Vibrio parahaemolyticus and Vibrio vulnificus in vitro colonization on plastics influenced by temperature and strain variability

Marine bacteria often exist in biofilms as communities attached to surfaces, like plastic. Growing concerns exist regarding marine plastics acting as potential vectors of pathogenic Vibrio, especially in a changing climate. It has been generalized that Vibrio vulnificus and Vibrio parahaemolyticus often attach to plastic surfaces. Different strains of these Vibrios exist having different growth and biofilm-forming properties. This study evaluated how temperature and strain variability affect V. parahaemolyticus and V. vulnificus biofilm formation and characteristics on glass (GL), low-density polyethylene (LDPE), polypropylene (PP), and polystyrene (PS). All strains of both species attached to GL and all plastics at 25, 30, and 35°C. As a species, V. vulnificus produced more biofilm on PS (p ≤ 0.05) compared to GL, and biofilm biomass was enhanced at 25°C compared to 30° (p ≤ 0.01) and 35°C (p ≤ 0.01). However, all individual strains' biofilm biomass and cell densities varied greatly at all temperatures tested. Comparisons of biofilm-forming strains for each species revealed a positive correlation (r = 0.58) between their dry biomass weight and OD₅₇₀ values from crystal violet staining, and total dry biofilm biomass for both species was greater (p ≤ 0.01) on plastics compared to GL. It was also found that extracellular polymeric substance (EPS) chemical characteristics were similar on all plastics of both species, with extracellular proteins mainly contributing to the composition of EPS. All strains were hydrophobic at 25, 30, and 35°C, further illustrating both species' affinity for potential attachment to plastics. Taken together, this study suggests that different strains of V. parahaemolyticus and V. vulnificus can rapidly form biofilms with high cell densities on different plastic types in vitro. However, the biofilm process is highly variable and is species-, strain-specific, and dependent on plastic type, especially under different temperatures.

Pulsed Electromagnetic Fields Disrupt Staphylococcus epidermidis Biofilms and Enhance the Antibiofilm Efficacy of Antibiotics

Staphylococcus epidermidis is implicated in a multitude of human infections and is one of the major causes of clinical infections in hospitals, especially at surgical sites and on indwelling medical devices, such as orthopedic implants. These infections are especially dangerous because of the S. epidermidis propensity to form biofilms, which increases resistance to antibiotics and the natural immune response. This study investigated pulsed electromagnetic fields (PEMF) as a potential treatment to combat such infections, as PEMF exposure was expected to disrupt the electrostatic forces that adhere staphylococcal cells to surfaces and to one another. To test the effect of PEMF on biofilms, S. epidermidis cultures were exposed to PEMF at various durations either during the growth phase or after a full biofilm had formed. In addition, cells were exposed to PEMF and concomitant antibiotic treatment. Biofilm viability was quantified by both crystal violet and alamarBlue assays and scanning electron microscopy. The results demonstrated that PEMF significantly inhibited biofilm formation and disrupted preformed biofilms in vitro while also showing synergistic biofilm inhibition when combined with antibiotics. These combined results indicate that PEMF should be considered a promising novel technique for treating S. epidermidis biofilm infections and undergo further testing in vivo. IMPORTANCE Antibiotic resistance and biofilm infections are major issues in health care because of the lack of a successful treatment modality and poor patient outcomes. These infections are a particular issue following orthopedic surgery or trauma wherein an infection may form on an orthopedic implant or patient's bone. The presented study demonstrates that pulsed electromagnetic fields may be a promising novel treatment for such infections and can overcome the medical challenges presented by biofilm formation. Furthermore, the effects demonstrated are even greater when combining pulsed electromagnetic field therapy with traditional antibiotics.

Manipulating Bacterial Biofilms Using Materiobiology and Synthetic Biology Approaches

Bacteria form biofilms on material surfaces within hours. Biofilms are often considered problematic substances in the fields such as biomedical devices and the food industry; however, they are beneficial in other fields such as fermentation, water remediation, and civil engineering. Biofilm properties depend on their genome and the extracellular environment, including pH, shear stress, and matrices topography, stiffness, wettability, and charges during biofilm formation. These surface properties have feedback effects on biofilm formation at different stages. Due to emerging technology such as synthetic biology and genome editing, many studies have focused on functionalizing biofilm for specific applications. Nevertheless, few studies combine these two approaches to produce or modify biofilms. This review summarizes up-to-date materials science and synthetic biology approaches to controlling biofilms. The review proposed a potential research direction in the future that can gain better control of bacteria and biofilms.

Antibacterial Properties of PMMA Functionalized with CuFe2O4/Cu2O/CuO Nanoparticles

We have prepared a composite thin coating by incorporation of CuFe2O4/Cu2O/CuO nanoparticles in polymethyl methacrylate (PMMA) matrix by using the solution casting method. The electrical explosion of two twisted wires (EETW) was used to obtain multicomponent CuFe2O4/Cu2O/CuO nanoparticles with an average particle size of 20–70 nm. The microscopic studies showed that the nanoparticles in the composite coatings are evenly distributed. However, nanoparticles are strongly agglomerated as the powder concentration in the coating increases to 5 wt.% and 10 wt.%, as the size of particle agglomerates increases to 50 and 100 μm, respectively. Therefore, nanoparticles were pre-treated with ultrasound when introduced into the PMMA matrix. The thermal stability of the composite coating does not change with the introduction of CuFe2O4/Cu2O/CuO nanoparticles in the amount of 5 wt.%. The inclusion of nanoparticles in the PMMA matrix significantly enhances its antibacterial activity. The addition of 5 wt.% nanoparticles inhibited the growth of E. coli by 100% and the growth of MRSA by 99.94% compared to pure PMMA already after 3 h of exposure of bacteria on the surface of the composites. This research provides an easy-to-manufacture and cost-efficient method for producing a CuFe2O4/Cu2O/CuO/PMMA composite coating with a broad application as an antibacterial material.

Valorisation of CO2 into Value-Added Products via Microbial Electrosynthesis (MES) and Electro-Fermentation Technology

Microbial electrocatalysis reckons on microbes as catalysts for reactions occurring at electrodes. Microbial fuel cells and microbial electrolysis cells are well-known in this context; both prefer the oxidation of organic and inorganic matter for producing electricity. Notably, the synthesis of high energy-density chemicals (fuels) or their precursors by microorganisms using bio-cathode to yield electrical energy is called Microbial Electrosynthesis (MES), giving an exceptionally appealing novel way for producing beneficial products from electricity and wastewater. This review accentuates the concept, importance and opportunities of MES, as an emerging discipline at the nexus of microbiology and electrochemistry. Production of organic compounds from MES is considered as an effective technique for the generation of various beneficial reduced end-products (like acetate and butyrate) as well as in reducing the load of CO2 from the atmosphere to mitigate the harmful effect of greenhouse gases in global warming. Although MES is still an emerging technology, this method is not thoroughly known. The authors have focused on MES, as it is the next transformative, viable alternative technology to decrease the repercussions of surplus carbon dioxide in the environment along with conserving energy.