Valorization of Spent Coffee by Caffeine Extraction Using Aqueous Solutions of Cholinium-Based Ionic Liquids

Optimization of the Microwave-Assisted Extraction of Caffeine from Roasted Coffee Beans

This study aimed to develop a fast procedure for caffeine extraction from roasted coffee beans. The microwave-assisted extraction was carried out in the microwave oven with an operating frequency of 2450 MHz. The response surface methodology based on a Box-Behnken design was used to model and optimize the extraction process. Among the analyzed extraction parameters (factors), the influence of extraction time (2-6 min), liquid-to-solid ratio (5-15 mL/g), and microwave power (336-595 W) were considered, while the yield of extracted caffeine was observed as the response of the system. Water was used as the solvent of choice for the extraction of caffeine. The optimum conditions were as follows: extraction time, 2 min; liquid-to-solid ratio, 15 mL/g; and microwave power, 500 W. In this optimized condition, the expected extraction yield of caffeine was 1.01 g/100 g dry weight (value confirmed by experimental assays). The total energy consumed of 1.7 kWh/100 g of purified caffeine indicated a more energy-efficient procedure by about 1200-15,000 times than the reported procedures. This study showed that caffeine can be quantitatively extracted from roasted coffee beans through a green approach and that the isolated caffeine has a high purity degree, which was confirmed by the UHPLC-ESI-MS/MS method. With this quality, isolated caffeine could be further used as an active ingredient in the food industry, while for pharmaceutical purposes, it must be further purified.

The influence of diverse fertilizer regimes on the phytoremediation potential of Pteris vittata in an abandoned nonferrous metallic mining site

Organic waste comprises a large amount of hydrocarbon containing organic substances, which is regarded as a potential resource rather than simply a waste. A field experiment was conducted in a poly-metallic mining area to investigate the potential of organic waste to facilitate the soil remediation process. Different organic wastes and a commonly used commercial fertilizer were added to heavy metal contaminated soil, which was under phytoremediation using the As hyperaccumulator Pteris vittata. The influence of diverse fertilizer regimes on the biomass of P. vittata and heavy metal removal by P. vittata, was investigated. The soil properties were analyzed after the application of phytoremediation with or without the addition of organic wastes. Results indicated that sewage sludge compost is an appropriate amendment to improve the phytoremediation efficiency. Compared to the control, the application of sewage sludge compost significantly reduced the extractability of As in soil by 26.8 %, and increased the removal of As and Pb by 26.9 % and 186.5 %, respectively. The highest removal of As and Pb reached 33 and 34 kg/ha, respectively. The sewage sludge compost-strengthened phytoremediation improved soil quality. And the diversity and richness of the bacterial community were improved, as represented by the increase in Shannon and Chao index. With improved efficiency and acceptable cost, the organic waste-strengthened phytoremediation can be used to control the risks posed by high concentrations of heavy metals in mining areas.

Simultaneous Extraction and Determination of Characteristic Steroidal Saponins and Homoisoflavonoids in Zhejiang Ophiopogon japonicus

Zhejiang Ophiopogonjaponicus (ZOJ) is a specific variety of Ophiopogon japonicus with characteristic steroidal saponins and homoisoflavonoids, which are also main pharmacodynamic constituents with clinical effects, including curing inflammation and cardiovascular diseases. However, few analysis methods were applied to simultaneously and quantitatively determine two kinds of its constituents, and hazardous organic solvents are mostly used for extraction. In this study, a new validated simultaneous extraction and determination method for four characteristic steroidal saponins and homoisoflavonoids in ZOJ was established by ionic liquid–ultrasonic extraction (IL-UAE) combined with HPLC-DAD-ELSD analysis, which can be used for the quality control of ZOJ. Chromatographic separation was performed with a DAD wavelength at 296 nm, and the ELSD parameters of the drift tube temperature (DTT), atomizer temperature (AT), and nitrogen gas pressure (NGP) were set at 20% heating power, 70 °C, and 25 psi, respectively. The optimal IL-UAE conditions were 1 mol/L [Bmim]CF₃SO₃ aqueous solution, a liquid–material ratio of 40 mL/g, and an ultrasonic time of 60 min. The proposed method is reliable, reproducible, and accurate, which were verified with real sample assays. Consequently, this work will be helpful for the quality control of ZOJ. It can also present a promising reference for the simultaneous extraction and determination of different kinds of constituents in other medicinal plants.

Quantification of Caffeine Interactions in Choline Chloride Natural Deep Eutectic Solvents: Solubility Measurements and COSMO-RS-DARE Interpretation

Solubility of active pharmaceutical ingredients is an important aspect of drug processing and formulation. Although caffeine was a subject of many studies aiming to quantify saturated solutions, many applied solvents suffer from not being environmentally friendly. This work fills this gap by presenting the results of solubility measurements in choline chloride natural deep eutectic solvents, ccNADES, comprising one of seven of the following polyalcohols: glycerol, sorbitol, xylitol, glucose, sucrose, maltose and fructose. The ratio of ccNADES components was optimized for maximizing caffeine solubility at room temperature. Additionally, temperature dependent solubility was measured for the first four systems exhibiting the highest solubility potential, both in their neat forms and in mixtures with water. Results were used for intermolecular interactions assessments using the COSMO-RS-DARE approach, which led to a perfect match between experimental and computed solubility values. An important methodological discussion was provided for an appropriate definition of the systems. Surprising linear trends were observed between the values of fitting parameters and water-ccNADES composition. In addition, comments on selection of the values of the fusion thermodynamic parameters were provided, which led to the conclusion that COSMO-RS-DARE solubility computations can effectively compensate for the inaccuracies of these important physicochemical properties.

Application of the Solute-Solvent Intermolecular Interactions as Indicator of Caffeine Solubility in Aqueous Binary Aprotic and Proton Acceptor Solvents: Measurements and Quantum Chemistry Computations

The solubility of caffeine in aqueous binary mixtures was measured in five aprotic proton acceptor solvents (APAS) including dimethyl sulfoxide, dimethylformamide, 1,4-dioxane, acetonitrile, and acetone. The whole range of concentrations was studied in four temperatures between 25 °C and 40 °C. All systems exhibit a strong cosolvency effect resulting in non-monotonous solubility trends with changes of the mixture composition and showing the highest solubility at unimolar proportions of organic solvent and water. The observed solubility trends were interpreted based on the values of caffeine affinities toward homo- and hetero-molecular pairs formation, determined on an advanced quantum chemistry level including electron correlation and correction for vibrational zero-point energy. It was found that caffeine can act as a donor in pairs formation with all considered aprotic solvents using the hydrogen atom attached to the carbon in the imidazole ring. The computed values of Gibbs free energies of intermolecular pairs formation were further utilized for exploring the possibility of using them as potential solubility prognostics. A semi-quantitative relationship (R² = 0.78) between caffeine affinities and the measured solubility values was found, which was used for screening for new greener solvents. Based on the values of the environmental index (EI), four morpholine analogs were considered and corresponding caffeine affinities were computed. It was found that the same solute–solvent structural motif stabilizes hetero-molecular pairs suggesting their potential applicability as greener replacers of traditional aprotic proton acceptor solvents. This hypothesis was confirmed by additional caffeine solubility measurements in 4-formylmorpholine. This solvent happened to be even more efficient compared to DMSO and the obtained solubility profile follows the cosolvency pattern observed for other aprotic proton acceptor solvents.