Developing Conversion Factors of LCIA Methods for Comparison of LCA Results in the Construction Sector

Energy feasibility and life cycle assessment of sludge pretreatment methods for advanced anaerobic digestion

Energy sustainability is one of the critical parameters to be studied for the successful application of pretreatment processes. This study critically analyzes the energy efficiency of different energy-demanding sludge pretreatment techniques. Conventional thermal pretreatment of sludge (∼5% total solids, TS) produced 244 mL CH₄/gTS, which could result in a positive energy balance of 2.6 kJ/kg TS. However, microwave pretreatment could generate only 178 mL CH₄/gTS with a negative energy balance of -15.62 kJ/kg TS. In CAMBI process, the heat requirements can be compensated using exhaust gases and hot water from combined heat and power, and electricity requirements are managed by the use of cogeneration. The study concluded that <100 ℃ pretreatment effectively enhances the efficiency of anaerobic digestion and shows positive energy balance over microwave and ultrasonication. Moreover, microwave pretreatment has the highest global warming potential than thermal and ultrasonic pretreatments.

Proposal of Major Environmental Impact Categories of Construction Materials Based on Life Cycle Impact Assessments

The “Korean New Deal” policy in South Korea emphasizes the necessity of a substantial and timely response to global climate change. In addition to carbon emissions, construction materials have various environmental impacts that necessitate serious considerations. Therefore, this study aimed to identify the major environmental impact categories of construction materials that reflect their diverse environmental impact characteristics using life cycle assessment. To this end, eight environmental impact categories were assessed for seven major construction materials. The contributions of all construction materials to these environmental impact categories were then analyzed to derive major environmental impact categories with contributions ≥95% or higher for each construction material. Consequently, global warming potential and abiotic depletion potential were derived as major environmental impact categories for all seven construction materials. In the case of ready-mixed concrete and cement, the photochemical oxidant creation potential was also found to be an environmental impact category that needs to be considered further. Thus, a study that defines environmental impacts must be considered in conjunction with the carbon emissions of building materials, and presenting the criteria for evaluating the defined environmental impacts is essential.

Life Cycle Assessment and Preliminary Cost Evaluation of a Smart Packaging System

Smart food packaging (SP) is an innovative packaging system that can extend the shelf life of the product and reduce food waste. The objective of the study is the estimation of the environmental and economic sustainability of the overall life cycle of a SP including a chemical sensor able to detect modifications in the concentration of CO2, which is an indicator of food spoilage, and encapsulated oregano essential oil (OEO), capable of inhibiting the microbial growth. For this purpose, a life cycle assessment (LCA), following the ISO 14040 series and ReCiPe methodology, and an economic evaluation of SP, were performed. The environmental footprint (EF) of SP was compared to that of a conventional packaging (CP) in terms of packaging production, use and end of life (EoL) of both the packaging and the contained food product. The results demonstrated that the production of SP burdened by 67% the impact category of climate change. However, when adapting four use and EoL scenarios, namely the CP generates 30% food waste, whereas SP can generate 5% (optimistic scenario), 10% (realistic) or 20% (conservative) waste, SP proved to be environmentally superior in most impact categories.