Assessment of Distribution of Potentially Toxic Elements in Different Environmental Media Impacted by a Former Chlor-Alkali Plant

Studying the concentration of xenobiotics in milk and developing the biosensor method for their rapid determination

In this article the content of toxic xenobiotics (heavy metals and pesticides) in cow milk collected from 5 districts of Eastern Kazakhstan was examined and their cumulative properties were determined. The content of organochlorine pesticides (HCCH, DDT) was not detected in the analyzed milk. The content of mercury and arsenic in milk samples does not exceed the maximum allowable concentration (0.005 and 0.05 mg/kg, respectively). The content of cadmium above the maximum allowable concentration (0.03 mg/kg) was found in milk sampled from Shemonaikha and Katon-Karagai districts. The content of lead and zinc above the maximum allowable concentration (0.1 and 5.0 mg/kg, respectively) was found in milk samples taken from all 5 studied districts. The content of copper above the maximum allowable concentration (1.0 mg/kg) was found in milk samples collected from 4 districts under study (Borodulikha, Beskaragai, Shemonaikha and Katon-Karagai). Based on the analysis of information data the need to develop an accelerated method of determining toxic xenobiotics in milk was substantiated. The basic directions of modernization of the biosensor for determination of cadmium and lead salts in milk and dairy products were selected. A new approach to the process of immobilization of the enzyme on the surface of a substrate for cadmium and lead salts determination in milk has been developed. The efficiency of using a polymeric plate with a graphite conducting layer as a basis for the enzyme biosensor was established.

Optimization of Solidification and Stabilization Efficiency of Heavy Metal Contaminated Sediment Based on Response Surface Methodology

Solidification and stabilization (S/S) by agents and stabilizers is an effective way to treat heavy metal-contaminated sediments. Optimization of curing condition is crucial to minimize the consumption of reagents on the base of effective S/S. In this work, the synergistic effects of cement and stabilizer on mechanical strength and leaching toxicity of contaminated sediments were investigated, and the S/S conditions were optimized using response surface methodology. On the basis of a single-factor test, multi-factor experiments were conducted to fit the relationship between the S/S effect of contaminated sediments and the amount of cement and stabilizer. The mechanism of stabilization was investigated by the results from the revised BCR method. The results indicate that the optimal curing conditions were 44.29% of cement content with 2.05% of trimercapto-s-triazine trisodium salt (TMT). After 28 days of curing, the compressive strength reached 2.07 MPa and the leaching concentrations of Cd, Cu, and Pb were 0.094 mg/L, 0.031 mg/L, and 0.173 mg/L, respectively, which met the requirement of in-situ resource recycling standard. The stability of heavy metals was significantly improved as a result of the removal of acid extractable fraction (15.58~69.92%) and an increase in the residual fraction (18.27~49.07%).

Potential Human Exposure to Mercury (Hg) in a Chlor-Alkali Plant Impacted Zone: Risk Characterization Using Updated Site Assessment Data

Industrial activities have resulted in severe environmental contamination that may expose rural and urban populations to unacceptable health risks. For example, chlor-alkali plants (CAPs) have historically contributed mercury (Hg) contamination in different environmental compartments. One such site (a burden from the Soviet Union) is located in an industrial complex in Pavlodar, Kazakhstan. Earlier studies showed the CAP operating in the second half of the twentieth century caused elevated Hg levels in soil, water, air, and biota. However, follow-up studies with thorough risk characterization are missing. The present study aims to provide a detailed risk characterization based on the data from a recent site assessment around the former CAP. The ⅀HI (hazard index) ranged from 9.30 × 10−4 to 0.125 (deterministic method) and from 5.19 × 10−4 to 2.54 × 10−2 (probabilistic method). The results indicate acceptable excess human health risks from exposure to Hg contamination in the region, i.e., exposure to other Hg sources not considered. Air inhalation and soil ingestion pathways contributed to the highest ⅀HI values (up to 99.9% and 92.0%, respectively). The residential exposure scenario (among four) presented the greatest human health risks, with ⅀HI values ranging from 1.23 × 10−2 to 0.125. Although the local urban and rural population is exposed to acceptable risks coming from exposure to Hg-contaminated environmental media, an assessment of contamination directly on the former CAP site on the industrial complex could not be performed due to access prohibition. Furthermore, the risks from ingesting contaminated fish were not covered as methyl-Hg was not targeted. An additional assessment may be needed for the scenarios of exposure of workers on the industrial complex and of the local population consuming fish from contaminated Lake Balkyldak. Studies on the fate and transport of Hg in the contaminated ecosystem are also recommended considering Hg methylation and subsequent bioaccumulation in the food chain.