Biofillers Improved Compression Modulus of Extruded PLA Foams

Structural features of biobased composite foams revealed by X-ray tomography

Polymer foams can have heterogeneous and complex internal structures, especially when material blends or particles have been integrated to create composites. It becomes even more challenging to probe and understand foam structure/properties when using non-uniform particles, such as biobased fillers. Optical or SEM imaging can only provide limited information as these are two-dimensional (2D) surface techniques. In this study, 3D X-ray tomography was applied to comprehensively analyze the structural features of biobased polyurethane foams containing porous rice hull fillers. The in-depth characterization at a wide range of length scale enabled us to quantify and obtain statistics of the unique trends in foam pore size and pore orientation corresponding to rice hull particle fraction and particle size. Rice hull particles were found to induce smaller cell formation. In addition, these biobased particles influenced cell expansion and caused cells to have less consistent orientation. Furthermore, after foam samples were subjected to cyclic compressive loading, X-ray tomography showed fractures in large (>100 μm) particles. This helps reveal the premature failing mechanism of composite foams with highly porous and coarse particles. The study elucidates novel microstructural evolution and deformation mechanisms using 3D X-ray tomography. The results offer new insights on internal structures for biobased composites and foams that are not previously possible through the conventional characterization tools.

Forefront Research of Foaming Strategies on Biodegradable Polymers and Their Composites by Thermal or Melt-Based Processing Technologies: Advances and Perspectives

The last few decades have witnessed significant advances in the development of polymeric-based foam materials. These materials find several practical applications in our daily lives due to their characteristic properties such as low density, thermal insulation, and porosity, which are important in packaging, in building construction, and in biomedical applications, respectively. The first foams with practical applications used polymeric materials of petrochemical origin. However, due to growing environmental concerns, considerable efforts have been made to replace some of these materials with biodegradable polymers. Foam processing has evolved greatly in recent years due to improvements in existing techniques, such as the use of supercritical fluids in extrusion foaming and foam injection moulding, as well as the advent or adaptation of existing techniques to produce foams, as in the case of the combination between additive manufacturing and foam technology. The use of supercritical CO2 is especially advantageous in the production of porous structures for biomedical applications, as CO2 is chemically inert and non-toxic; in addition, it allows for an easy tailoring of the pore structure through processing conditions. Biodegradable polymeric materials, despite their enormous advantages over petroleum-based materials, present some difficulties regarding their potential use in foaming, such as poor melt strength, slow crystallization rate, poor processability, low service temperature, low toughness, and high brittleness, which limits their field of application. Several strategies were developed to improve the melt strength, including the change in monomer composition and the use of chemical modifiers and chain extenders to extend the chain length or create a branched molecular structure, to increase the molecular weight and the viscosity of the polymer. The use of additives or fillers is also commonly used, as fillers can improve crystallization kinetics by acting as crystal-nucleating agents. Alternatively, biodegradable polymers can be blended with other biodegradable polymers to combine certain properties and to counteract certain limitations. This work therefore aims to provide the latest advances regarding the foaming of biodegradable polymers. It covers the main foaming techniques and their advances and reviews the uses of biodegradable polymers in foaming, focusing on the chemical changes of polymers that improve their foaming ability. Finally, the challenges as well as the main opportunities presented reinforce the market potential of the biodegradable polymer foam materials.

One Step Catalytic Conversion of Polysaccharides in Ulva prolifera to Lactic Acid and Value-Added Chemicals

The production of lactic acid and value-added chemicals (such as hydroxypropanone, glycolic acid, and formic acid) directly from Ulva prolifera via one-step catalytic process was studied. The effect of different amounts of YCl3-derived catalysts on the hydrothermal conversion of carbohydrates in Ulva prolifera was explored, and the reaction conditions were optimized. In this catalytic system, rhamnose could be extracted from Ulva prolifera and converted in situ into lactic acid and hydroxypropanone at 160 °C, while all the glucose, xylose, and rhamnose were fractionated and completely converted to lactic acid at 220 °C or at a higher temperature, via several consecutive and/or parallel catalytic processes. The highest yield of lactic acid obtained was 31.4 wt% under the optimized conditions. The hydrothermal conversion of Ulva prolifera occurred rapidly (within 10 min) and showed promise to valorize Ulva prolifera.

Influence of Biofillers on the Properties of Regrind Crystalline Poly(ethylene terephthalate) (CPET)

As the demand for plastics only increases, new methods are required to economically and sustainably increase plastic usage without landfill and environmental accumulation. In addition, the use of biofillers is encouraged as a way to reduce the cost of the final resin by incorporating agricultural and industrial waste by-products, such as rice hulls and coffee chaff to further reduce waste being sent to landfills. Crystalline poly(ethylene terephthalate) (CPET) is a resin commonly used for microwave and ovenable food packaging containers that have not been fully explored for recycling. In this article, we investigate how the incorporation of biofillers at 5% wt. and 10% wt. impacts critical polymer properties. The thermal and mechanical properties were not significantly altered with the presence of rice hulls or coffee chaff in the polymer matrix at 5% wt. loading, but some reduction in melt temperature, thermal stability, and maximum stress and strain was more noticed at 10% wt. The complex viscosity was also reduced with the introduction of biofillers. The levels of heavy metals of concern, such as Cd, Cr, and Pb, were below the regulatory limits applicable in the United States and Europe. Additional studies are suggested to improve the performance of CPET/biofiller blends by pre-treating the biofiller and using compatibilizers.