Impact of Nonlinear Thermal Radiation and the Viscous Dissipation Effect on the Unsteady Three-Dimensional Rotating Flow of Single-Wall Carbon Nanotubes with Aqueous Suspensions

Channelized water driven flow of MHD carbon-nanotube nanofluid influenced by rotation, heat source and thermal radiation

The efficiency enhancements of thermal energy systems are made with advancements made in the effective use of thermal solar collectors, operating fluid and the introduction of curved and transparent solar panels. In this paper, we present a prototype theoretical/mathematical model for the carbon nanotube-based curved solar panels combined with the solar thermal collector and the porous rotating channel. The analysis is carried out to study the effect of transversely applied magnetic, rotation of the porous channel, linear thermal radiation and the uniformly distributed heat source on the heat transfer characteristics of the single-walled (SWCNT) and multi-walled carbon nanotubes (MWCNT). Due to the nonlinearity of the governing momentum and the heat transport equations and the limitation of the exact methods, numerical similarity solutions are obtained for the boundary value problem using the MATLAB function bvp4c. Influences of different parameters are observed through graphs on the nanofluid flow and temperature profiles. The velocity profile exhibits dual behavior for rising the nanoparticles' volume fraction, the magnetic parameter, rotation, and the Reynolds number. The temperature profile increases with increasing nanoparticles and heat source parameters and decreases for increasing suction, rotation, Reynolds number, and thermal radiation. In some cases, flow profiles for SWCNT exceed those of MWCNT.

Thermal Performance on Radiative and Ohmic Dissipative Magneto-Nanoliquid Over Moving Flat Porous Plate Suspended by Single Wall Carbon Nanotubes and Multi Wall Carbon Nanotubes

This investigation examines heat transport in the flow of magnetized Blasius flow suspended by carbon nanotubes (CNTs) on an accelerated by moving flat porous plate that contains water and ethylene glycol as base fluids. The transfer of heat has been contemplated in the company of suspended CNTs above a plane plate. The flow simulations are carried by utilizing the impact of magnetic field and uniform porous medium. The transport of thermal is controlled by the significant influence of thermal radiation, heat source, heat and Joule dissipation. Utilizing scaling analysis flow governing problem is converted into a set of higher order nonlinear ordinary differential equations which afterwards are tackled numerically by employing Runge-Kutta Fehlberg 45 method with shooting quadrature. Quantities of flow physical significance are portrayed through graphically. Verification of attained numerical results with available literature under certain limitations are presented and found excellent agreement. With elevation in convective term flow profiles of SWCNTs and MWCNTs are reduced. A reduction of flow characteristic dimensions is observed with increasing magnetic field and porosity terms. Finally, SWCNTs and MWCNTs are positively influenced by Joule dissipation and negatively by thermal radiation.

Scrutinization of second law analysis and viscous dissipation on Reiner-RivlinNanofluid with the effect of bioconvection over a rotating disk

In comparison to Newtonian fluids, non-Newtonian fluids have fascinating features in heat transportation. Here, newly type of Reiner-Rivlinnanoliquid flow over the revolving disk for viscous dissipation (VD) is being explored in a multiple-slip effect. The inclusion of gyrotactic microorganisms in the nanoliquid enhances the tendency of the nanoparticles. The idea of the intended model is enhanced by considering in the impact of activation energy, thermal radiative, heated convective conditions and entropy minimization. The system of nonlinear PDE is constructed into nonlinear ODE's by applying the von-Karman similarity method and later solved numerically using the BVP4c solver which is considered to study the complicated ordinary differential equations. TheInfluence of various parameters is elaborated and plotted physically through the graphical illustration. By contrasting the reported data in the restricted form to a previously published article, the accuracy of the current model has examined. The impact of a non-Newtonian fluid parameter over the velocity field appeared to showdpreciation in it. The results elucidate that when the wall slip coefficient is larger more torque is needed to maintain constant disk revaluation. Surface heat transmission and wall skin friction are computed for a wide variety of factors. These flows have several real world-applications, including modeling cases that occur in oceanography and geophysics, various industrial fields (such as lumber production).

Magnetic Rotating Flow of a Hybrid Nano-Materials Ag-MoS2 and Go-MoS2 in C2H6O2-H2O Hybrid Base Fluid over an Extending Surface Involving Activation Energy: FE Simulation

Numeric simulations are performed for a comparative study of magnetohydrodynamic (MHD) rotational flow of hybrid nanofluids (MoS2-Ag/ethyleneglycol-water (50–50%) and MoS2-Go/ethyleneglycol-water (50–50%)) over a horizontally elongated plane sheet. The principal objective is concerned with the enhancement of thermal transportation. The three-dimensional formulation governing the conservation of mass, momentum, energy, and concentration is transmuted into two-dimensional partial differentiation by employing similarity transforms. The resulting set of equations (PDEs) is then solved by variational finite element procedure coded in Matlab script. An intensive computational run is carried out for suitable ranges of the particular quantities of influence. The primary velocity component decreases monotonically and the magnitude of secondary velocity component diminishes significantly when magnetic parameter, rotational parameter, and unsteadiness parameter are incremented. Both the primary and secondary velocities are smaller in values for the hybrid phase Ag-MoS2 than that of hybrid phase Go-MoS2 but the nanoparticle concentration and temperature are higher for hybrid phase Ag-MoS2. The increased values of parameters for thermophoresis, Brownian motion, shape factor, and volume fraction of ϕ2 made significant improvement in the temperature of the two phases of nano liquids. Results are also computed for the coefficients of skin friction(x, y-directions), Nusselt number, and Sherwood number. The present findings manifest reasonable comparison to their existing counterparts. Some of the practical engineering applications of the present analysis may be found in high-temperature nanomaterial processing technology, crystal growing, extrusion processes, manufacturing and rolling of polymer sheets, academic research, lubrication processes, and polymer industry.

Finite Element Study of Magnetohydrodynamics (MHD) and Activation Energy in Darcy–Forchheimer Rotating Flow of Casson Carreau Nanofluid

Here, a study for MHD (magnetohydrodynamic) impacts on the rotating flow of Casson Carreau nanofluids is considered. The temperature distribution is associated with thermophoresis, Brownian motion, and heat source. The diffusion of chemically reactive specie is investigated with Arrhenius activation energy. The governing equations in the 3D form are changed into dimensionless two-dimensional form with the implementation of suitable scaling transformations. The Variational finite element procedure is harnessed and coded in Matlab script to obtain the numerical solution of the coupled non-linear partial differential problem. The variation patterns of Sherwood number, Nusselt number, skin friction coefficients, velocities, concentration, and temperature functions are computed to reveal the physical nature of this examination. It is seen that higher contributions of the magnetic force, Casson fluid, and rotational fluid parameters cause a raise in the temperature like thermophoresis and Brownian motion does but also causes a slowing down in the primary as well as secondary velocities. The FEM solutions show an excellent correlation with published results. The current study has significant applications in the biomedical, modern technologies of aerospace systems, and relevance to energy systems.

Finite Element Study of MHD Impacts on the Rotating Flow of Casson Nanofluid with the Double Diffusion Cattaneo—Christov Heat Flux Model

A study for MHD (magnetohydrodynamic) impacts on the rotating flow of Casson nanofluids is considered. The concentration and temperature distributions are related along with the double diffusion Cattaneo–Christov model, thermophoresis, and Brownian motion. The governing equations in the 3D form are changed into dimensionless two-dimensional form with the implementation of suitable scaling transformations. The variational finite element procedure is harnessed and coded in Matlab script to obtain the numerical solution of the coupled nonlinear partial differential problem. The variation patterns of Sherwood number, Nusselt number, skin friction coefficients, velocities, concentration, and temperature functions are computed to reveal the physical nature of this examination. It is seen that higher contributions of the magnetic force, Casson fluid, and rotational fluid parameters cause to raise the temperature like thermophoresis and Brownian motion does but causes slowing the primary as well as secondary velocities. The FEM solutions showing an excellent correlation with published results. The current study has significant applications in the biomedical, modern technologies of aerospace systems, and relevance to energy systems.

Solving the Nonlinear Boundary Layer Flow Equations with Pressure Gradient and Radiation

The physical problem under consideration is the boundary layer problem of an incompressible, laminar flow, taking place over a flat plate in the presence of a pressure gradient and radiation. For the mathematical formulation of the problem, the partial differential equations of continuity, energy, and momentum are taken into consideration with the boundary layer simplifications. Using the dimensionless Falkner–Skan transformation, a nonlinear, nonhomogeneous, coupled system of partial differential equations (PDEs) is obtained, which is solved via the homotopy analysis method. The obtained analytical solution describes radiation and pressure gradient effects on the boundary layer flow. These analytical results reveal that the adverse or favorable pressure gradient influences the dimensionless velocity and the dimensionless temperature of the boundary layer. An adverse pressure gradient causes significant changes on the dimensionless wall shear parameter and the dimensionless wall heat-transfer parameter. Thermal radiation influences the thermal boundary layer. The analytical results are in very good agreement with the corresponding numerical ones obtained using a modification of the Keller’s-box method.

Radiative MHD Casson Nanofluid Flow with Activation energy and chemical reaction over past nonlinearly stretching surface through Entropy generation

In the present research analysis we have addressed comparative investigation of radiative electrically conducting Casson nanofluid. Nanofluid Flow is assumed over a nonlinearly stretching sheet. Heat transport analysis is carried via joule dissipation, thermal behavior and convective boundary condition. To employ the radiative effect radiation was involved to show the diverse states of nanoparticles. Furthermore entropy optimization with activation energy and chemical reaction are considered. Thermodynamics 2nd law is applied to explore entropy generation rate. Nonlinear expression is simplified through similarity variables. The reduced ordinary system is tackled through optimal approach. Flow pattern was reported for wide range of scrutinized parameters. Computational consequences of velocity drag force, heat flux and concentration gradient are analyzed numerically in tables. Results verify that conduction mode augments with enhance of magnetic parameter.Increasing radiation boosts the temperature and entropy. Activation energy corresponds to augmented concentration. Heat transmission rate augments with the consideration of radiation source term.

Special Issue on Symmetry and Fluid Mechanics

This Special Issue invited researchers to contribute their original research work and review articles on “Symmetry and Fluid Mechanics” that either advances the state-of-the-art mathematical methods through theoretical or experimental studies or extends the bounds of existing methodologies with new contributions related to the symmetry, asymmetry, and lie symmetries of differential equations proposed as mathematical models in fluid mechanics, thereby addressing current challenges. In response to the call for papers, a total of 42 papers were submitted for possible publication. After comprehensive peer review, only 25 papers qualified for acceptance for final publication. The rest of the papers could not be accommodated. The submissions may have been technically correct but were not considered appropriate for the scope of this Special Issue. The authors are from geographically distributed countries such as the USA, Australia, China, Saudi Arabia, Iran, Pakistan, Malaysia, Abu Dhabi, UAE, South Africa, and Vietnam. This reflects the great impact of the proposed topic and the effective organization of the guest editorial team of this Special Issue.

Darcy–Boussinesq Model of Cilia-Assisted Transport of a Non-Newtonian Magneto-Biofluid with Chemical Reactions

The model developed in this study presents a mathematical approach to the physiological transport of seminal liquid due to ciliary movements, which are attached with the lumen of the ductile efferent in the male reproductive system. The rheological properties of the seminal liquids were described using the Jeffrey liquid model. The problem described an electromagnetic mixed convective flow of a Jeffrey liquid through a vertical channel with heat and mass transfers. The effects of chemical reactions and the external heat generation were included in the formulation. The flow took place through an active porous medium (due to thick cilia mat and other deposits) and was influenced by the Lorentz magnetic force. Four basic conservation laws of mass, momentum, energy, and concentration were utilized in the mathematical modeling. These are highly nonlinear equations, which were simplified due to a physiologically valid approach known as LAT (lubrication approximation theory). Analytical solutions for temperature, concentration, and velocity profiles were evaluated. The expressions describing the pressure–volume flow rate relationships were also obtained. Analysis of various physical and geometrical factors affecting the pressure–volume (pumping) characteristics was also presented. One of the main findings of our study is that the difference between our calculated values of the flow rate and the estimated values of the flow rate in the ductile efferent was negligibly small. Moreover, our results can be implemented in the artificial cilia pumping systems in microchannels.

Brownian Motion and Thermophoresis Effects on MHD Three Dimensional Nanofluid Flow with Slip Conditions and Joule Dissipation Due to Porous Rotating Disk

This paper examines the time independent and incompressible flow of magnetohydrodynamic (MHD) nanofluid through a porous rotating disc with velocity slip conditions. The mass and heat transmission with viscous dissipation is scrutinized. The proposed partial differential equations (PDEs) are converted to ordinary differential equation (ODEs) by mean of similarity variables. Analytical and numerical approaches are applied to examine the modeled problem and compared each other, which verify the validation of both approaches. The variation in the nanofluid flow due to physical parameters is revealed through graphs. It is witnessed that the fluid velocities decrease with the escalation in magnetic, velocity slip, and porosity parameters. The fluid temperature escalates with heightening in the Prandtl number, while other parameters have opposite impacts. The fluid concentration augments with the intensification in the thermophoresis parameter. The validity of the proposed model is presented through Tables.

Heat Transfer Analysis of a Magneto-Bio-Fluid Transport with Variable Thermal Viscosity through a Vertical Ciliated Channel

We communicate the responses of various physiological fluids containing hemoglobin and other ionic constituents when they propagate in the presence of an electromagnetic body force field with the mechanisms of heat generation and conduction. A fully developed mixed convective flow of a Newtonian fluid takes place through a 2D vertical channel in the presence of an external magnetic field acting in the direction normal to the flow. The inner surface of the channel is carpeted with a thick mat of cilia, which propagates a sinusoidal metachronal wave travelling in the direction of flow. Coupled, nonlinear governing Naiver-Stokes and temperature equations are simplified by utilizing the creeping flow and long wavelength approximations. This enables us to formulate the exact analytical solution of the temperature distribution; whereas, the velocity distribution is evaluated from the momentum equations by using the Adomian decomposition method. In order to determine the pumping characteristics, the formulae of volume flow rate and the pressure rise are also obtained. Trapping due to the ciliary system is highlighted by graphing the stream function. The findings of the present model have significant outputs, which can be applicable in the physiological transport of human semen through the male reproduction system.

Darcy–Forchheimer Radiative Flow of Micropoler CNT Nanofluid in Rotating Frame with Convective Heat Generation/Consumption

Since 1991, from the beginning of the carbon nanotube era, this has been a focus point for investigation due to its synthetic and simple nature. Unique properties like good stiffness, high surface area, and resilience of carbon nanotubes (CNTs) have been investigated in many engineering applications such as hydrogen storage, composite material, energy storage, electrochemical super-capacitors, transistors, sensors, and field-emitting devices. Keeping in view these applications, we investigate single and multi-walled CNTs nanofluid flow having water as the base fluid between parallel and horizontal rotating plates with microstructure and inertial properties. The thermal radiation effect is considered for variable phenomenon of heat generation/consumption. The principal equations are first symmetrically transformed to a system of nonlinear coupled ordinary differential equations (ODEs), and then, Homotopy Analysis Technique (HAM) and numerical method are employed for solving these coupled equations. The obtained analytical and numerical results are explained graphically and through different tables. The HAM and numerical results show an excellent agreement. The Skin friction and the Nusselt number are numerically calculated and then analyzed with the already published results, and these results are found to be in agreement with one another. The impact of important parameters are shown graphically.

Magnetohydrodynamic nanofluid radiative thermal behavior by means of Darcy law inside a porous media

Radiative nanomaterial thermal behavior within a permeable closed zone with elliptic hot source is simulated. Darcy law is selected for simulating permeable media in existence of magnetic forces. Contour plots for various buoyancy, Hartmann numbers and radiation parameter were illustrated. Carrier fluid is Al2O3-water with different shapes. Outputs prove that conduction mode augments with enhance of Ha. Nu augments with considering radiation source term.

Two-Phase Couette Flow of Couple Stress Fluid with Temperature Dependent Viscosity Thermally Affected by Magnetized Moving Surface

The Couette–Poiseuille flow of couple stress fluid with magnetic field between two parallel plates was investigated. The flow was driven due to axial pressure gradient and uniform motion of the upper plate. The influence of heating at the wall in the presence of spherical and homogeneous Hafnium particles was taken into account. The temperature dependent viscosity model, namely, Reynolds’ model was utilized. The Runge–Kutta scheme with shooting was used to tackle a non-linear system of equations. It was observed that the velocity decreased by increasing the values of the Hartman number, as heating of the wall reduced the effects of viscous forces, therefore, resistance of magnetic force reduced the velocity of fluid. However, due to shear thinning effects, the velocity was increased by increasing the values of the viscosity parameter, and as a result the temperature profile also declined. The suspension of inertial particles in an incompressible turbulent flow with Newtonian and non-Newtonian base fluids can be used to analyze the biphase flows through diverse geometries that could possibly be future perspectives of proposed model.

Three-Dimensional Casson Nanofluid Thin Film Flow over an Inclined Rotating Disk with the Impact of Heat Generation/Consumption and Thermal Radiation

In this research, the three-dimensional nanofluid thin-film flow of Casson fluid over an inclined steady rotating plane is examined. A thermal radiated nanofluid thin film flow is considered with suction/injection effects. With the help of similarity variables, the partial differential equations (PDEs) are converted into a system of ordinary differential equations (ODEs). The obtained ODEs are solved by the homotopy analysis method (HAM) with the association of MATHEMATICA software. The boundary-layer over an inclined steady rotating plane is plotted and explored in detail for the velocity, temperature, and concentration profiles. Also, the surface rate of heat transfer and shear stress are described in detail. The impact of numerous embedded parameters, such as the Schmidt number, Brownian motion parameter, thermophoretic parameter, and Casson parameter (Sc, Nb, Nt, γ), etc., were examined on the velocity, temperature, and concentration profiles, respectively. The essential terms of the Nusselt number and Sherwood number were also examined numerically and physically for the temperature and concentration profiles. It was observed that the radiation source improves the energy transport to enhance the flow motion. The smaller values of the Prandtl number, Pr, augmented the thermal boundary-layer and decreased the flow field. The increasing values of the rotation parameter decreased the thermal boundary layer thickness. These outputs are examined physically and numerically and are also discussed.

Impact of Nonlinear Thermal Radiation on MHD Nanofluid Thin Film Flow over a Horizontally Rotating Disk

Nanoscience can be stated as a superlative way of changing the properties of a working fluid. Heat transmission features during the flow of nanofluids are an imperative rule from the industrial and technological point of view. This article presents a thin film flow of viscous nanofluids over a horizontal rotating disk. The impact of non-linear thermal radiation and a uniform magnetic field is emphasized in this work. The governing equations were transformed and solved by the homotopy analysis method and the ND-Solve technique. Both analytical and numerical results are compared graphically and numerically, and excellent agreement was obtained. Skin friction and the Nusselt number were calculated numerically. It is concluded that the thin film thickness of nanofluids reduces with enhanced values of the magnetic parameter. In addition, the nanofluid temperature was augmented with increasing values of the thermal radiation parameter. The impact of emerging parameters on velocities and temperature profiles were obtainable through graphs and were deliberated on in detail.

Impact of Thermal Radiation and Heat Source/Sink on MHD Time-Dependent Thin-Film Flow of Oldroyed-B, Maxwell, and Jeffry Fluids over a Stretching Surface

In this study paper, we examined the magnetohydrodynamic (MHD) flow of three combined fluids, Maxwell, Jeffry, and Oldroyed- B fluids, with variable heat transmission under the influence of thermal radiation embedded in a permeable medium over a time-dependent stretching sheet. The fluid flow of liquid films was assumed in two dimensions. The fundamental leading equations were changed to a set of differential nonlinear and coupled equations. For this conversion, suitable similarity variables were used. An optimal tactic was used to acquire the solution of the modeled problems. The convergence of the technique has been shown numerically. The obtained analytical and numerical consequences are associated graphically and tabulated. An excellent agreement was obtained between the homotropy analysis method (HAM) and numerical methods. The variation of the skin friction and Nusslet number and their influence on the temperature and concentration profiles were scrutinized. The influence of the thermal radiation, unsteadiness effect, and MHD were the main focus of this study. Furthermore, for conception to be physically demonstrated, the entrenched parameters are discussed graphically in detail along with their effect on liquid film flow.

Cattaneo–Christov Heat Flux Model for Three-Dimensional Rotating Flow of SWCNT and MWCNT Nanofluid with Darcy–Forchheimer Porous Medium Induced by a Linearly Stretchable Surface

In this paper we investigated the 3-D Magnetohydrodynamic (MHD) rotational nanofluid flow through a stretching surface. Carbon nanotubes (SWCNTs and MWCNTs) were used as nano-sized constituents, and water was used as a base fluid. The Cattaneo–Christov heat flux model was used for heat transport phenomenon. This arrangement had remarkable visual and electronic properties, such as strong elasticity, high updraft stability, and natural durability. The heat interchanging phenomenon was affected by updraft emission. The effects of nanoparticles such as Brownian motion and thermophoresis were also included in the study. By considering the conservation of mass, motion quantity, heat transfer, and nanoparticles concentration the whole phenomenon was modeled. The modeled equations were highly non-linear and were solved using homotopy analysis method (HAM). The effects of different parameters are described in tables and their impact on different state variables are displayed in graphs. Physical quantities like Sherwood number, Nusselt number, and skin friction are presented through tables with the variations of different physical parameters.

Peristaltic Blood Flow of Couple Stress Fluid Suspended with Nanoparticles under the Influence of Chemical Reaction and Activation Energy

The present study gives a remedy for the malign tissues, cells, or clogged arteries of the heart by means of permeating a slim tube (i.e., catheter) in the body. The tiny size gold particles drift in free space of catheters having flexible walls with couple stress fluid. To improve the efficiency of curing and speed up the process, activation energy has been added to the process. The modified Arrhenius function and Buongiorno model, respectively, moderate the inclusion of activation energy and nanoparticles of gold. The effects of chemical reaction and activation energy on peristaltic transport of nanofluids are also taken into account. It is found that the golden particles encapsulate large molecules to transport essential drugs efficiently to the effected part of the organ.