The Impact of Nanoparticles Due to Applied Magnetic Dipole in Micropolar Fluid Flow Using the Finite Element Method

Maxwell Nanofluids: FEM Simulation of the Effects of Suction/Injection on the Dynamics of Rotatory Fluid Subjected to Bioconvection, Lorentz, and Coriolis Forces

In this study, the relevance of Lorentz and Coriolis forces on the kinetics of gyratory Maxwell nanofluids flowing against a continually stretched surface is discussed. Gyrotactic microbes are incorporated to prevent the bioconvection of small particles and to improve consistency. The nanoparticles are considered due to their valuable properties and ability to enhance thermal dissipation, which is important in heating systems, advanced technology, microelectronics, and other areas. The main objective of the analysis is to enhance the rate of heat transfer. An adequate similarity transformation is used to convert the primary partial differential equations into non-linear dimensionless ordinary differential equations. The resulting system of equations is solved using the finite element method (FEM). The increasing effects of the Lorentz and Coriolis forces induce the velocities to moderate, whereas the concentration and temperature profiles exhibit the contrary tendency. It is observed that the size and thickness of the fluid layers in the axial position increase as the time factor increases, while the viscidity of the momentum fluid layers in the transverse path decreases as the time factor decreases. The intensity, temperature, and velocity variances for the suction scenario are more prominent than those for the injection scenario, but there is an opposite pattern for the physical quantities. The research findings are of value in areas such as elastomers, mineral productivity, paper-making, biosensors, and biofuels.

Vibration Analysis of a Finite Lightweight Locally Resonant Beam Suspended with Periodic Force-Moment-Type Resonators inside Using an Exact Wave-Based Approach

This paper employs and develops the exact wave-based vibration analysis approach to investigate the propagation properties of a designed finite lightweight locally resonant (LR) beam with two-degree-of-freedom (2-DOF) force-moment-type resonators attached periodically inside. By deriving the propagation, reflection, and transmission matrices of the structural discontinuities, the vibration of the LR beam can be described as structural waves. By assembling wave relations into the beam, the approach shows high efficiency because the forced vibration problem of the lightweight LR structure is turned to be the solution to a related set of matrix equations. The accuracy of the developed approach is validated with two examples carried out using the finite element method. In addition, the influence of the main parameters of the LR beam is studied and we found that the increase in the mass of the resonator and the stiffness of the spring are more sensitive in broadening the width and increasing the center frequency of the band gap of the designed lightweight LR beam. The proposed structure and analysis approach in this paper may provide an exact and efficient means for the design and analysis of structures in which damping and lightweight properties are required, such as space-arm and the framework of antennas in the field of aerospace.

Micropolar Dusty Fluid: Coriolis Force Effects on Dynamics of MHD Rotating Fluid When Lorentz Force Is Significant

The main objective of this investigation to examine the momentum and thermal transportation of rotating dusty micropolar fluid flux with suspension of conducting dust particles across the stretched sheet. The novelty of the flow model is the exploration of the significance of boosting the volume concentration of dust particles in fluid dynamics. The governing PDEs of the problem for both phase models are transmuted into nonlinear coupled non-dimensional ODEs by utilizing suitable similarity modifications. The bvp4c technique was utilized in MATLAB script to acquire a graphical representation of the experimental results. This study illustrates the analysis of repercussions of pertinent parameters on non-Newtonian fluid and the dusty phase of fluid. By improving the volume concentration of dust particles and rotating parameters, the axial velocity for both phases depreciates, whereas temperature and transverse velocity for both phases have the opposite behavior. The micro-rotation distribution rises with higher contributions of rotating and material parameters, whereas it decreases against larger inputs of volume concentration of dust particles. The growing strength of the dust volume fraction (ϕd) caused the coefficient of skin friction to decrease along the x direction, and the skin friction coefficient is raised along the y direction.

Magnetic Dipole and Thermal Radiation Impacts on Stagnation Point Flow of Micropolar Based Nanofluids over a Vertically Stretching Sheet: Finite Element Approach

An analysis for magnetic dipole with stagnation point flow of micropolar nanofluids is modeled for numerical computation subject to thermophoresis, multi buoyancy, injection/suction, and thermal radiation. The partial derivative is involved in physical consideration, which is transformed to format of ordinary differential form with the aid of similarity functions. The variational finite element procedure is harnessed and coded in Matlab script to obtain the numerical solution of the coupled non-linear ordinary differential problem. The fluid temperature, velocity, tiny particles concentration, and vector of micromotion are studied for two case of buoyancy (assisting 0<λ, and opposing 0>λ) through finite-element scheme. The velocity shows decline against the rising of ferromagnetic interaction parameter (β) (assisting 0<λ and opposing 0>λ), while the inverse behaviour is noted in micro rotation profile. Growing the thermo-phoresis and microrotation parameters receded the rate of heat transfer remarkable, and micromotion and fluid velocity enhance directly against buoyancy ratio. Additionally, the rate of couple stress increased against rising of thermal buoyancy (λ) and boundary concentration (m) in assisting case, but opposing case shows inverse behavior. The finite element scheme convergency was tested by changing the mesh size, and also test the validity with available literature.

Radiation and Multiple Slip Effects on Magnetohydrodynamic Bioconvection Flow of Micropolar Based Nanofluid over a Stretching Surface

Our aim in this article is to study the radiation and multiple slip effects on magnetohydrodynamic bioconvection flow of micropolar based nanofluid over a stretching surface. In addition, a steering mechanism of making improvements to the Brownian motion and thermophoresis motion of nanoparticles is integrated. The numerical solution of 2-dimensional laminar bioconvective boundary layer flow of micropolar based nanofluids is presented. The basic formulation as partial differential equations is transmuted into ordinary differential equations with the help of suitable similarity transformations. Which are then solved by using the Runge–Kutta method of fourth-order with shooting technique. Some important and relevant characteristics of physical quantities are evaluated via inclusive numerical computations. The influence of vital parameters such as buoyancy parameter λ, bioconvection Rayleigh number Rb, the material parameter K are examined. This investigation showed that with the increment in material parameter, micro rotation and velocity profile increases. In addition, the temperature rises due to the enhancement in Nb (Brownian motion) and Nt (thermophoresis parameter).

Finite Element Study for Magnetohydrodynamic (MHD) Tangent Hyperbolic Nanofluid Flow over a Faster/Slower Stretching Wedge with Activation Energy

The below work comprises the unsteady flow and enhanced thermal transportation for Carreau nanofluids across a stretching wedge. In addition, heat source, magnetic field, thermal radiation, activation energy, and convective boundary conditions are considered. Suitable similarity functions use to transmuted partial differential formulation into the ordinary differential form, which is solved numerically by the finite element method and coded in Matlab script. Parametric computations are made for faster stretch and slowly stretch to the surface of the wedge. The progressing value of parameter A (unsteadiness), material law index ϵ, and wedge angle reduce the flow velocity. The temperature in the boundary layer region rises directly with exceeding values of thermophoresis parameter Nt, Hartman number, Brownian motion parameter Nb, ϵ, Biot number Bi and radiation parameter Rd. The volume fraction of nanoparticles rises with activation energy parameter EE, but it receded against chemical reaction parameter Ω, and Lewis number Le. The reliability and validity of the current numerical solution are ascertained by establishing convergence criteria and agreement with existing specific solutions.